Categories
Bul Armory fail to feed FMJ FTF range report SAS II Ultralight

SAS II UL Range and Progress Report for 10/2023

I’m currently very near to crossing over the 1,000 round threshold with the Bul Armory SAS II Ultralight.

I visited the range a few days ago, bringing 200 rounds of ammo. I ran out of range time before I was able to shoot it all. I visited after work since I’ve to be at work every Wednesday now. I may make this my range day every Wednesday since my work isn’t far from XCal.

While I was waiting in line for a lane assignment, I happened to see some of the range’s rental selection. They’ve Staccatos, as well as several really nice 1911s. What I really want is to try the G43X and G48 (I may be purchasing one of those next year). I didn’t see those guns in their rental section but their rental section is very large and I’m sure they’ve a good selection of Glock rentals. I’ll check next time I go. I also wanted to try their P365, since I’ve seen more than one person asking, “Why buy a SAS II UL when a P365 is better?” In my opinion, that’s a rather lame comment since most folks aren’t cross-shopping those two guns (due to price as well as platform — both of those being quite different frome one another). Yeah, a P365 will conceal better, but P365s are also more difficult to shoot quickly and accurately. The SAS II UL has a bigger grip than the P365, but that doesn’t mean that an owner will have issues concealing a UL. The UL will almost certainly be less snappy and quicker to shoot. It’ll probably outshoot the G43X, too.

I shot 187 rounds of the 200 that I broght with me. Most of it was Fiocchi 115-gr FMJ, although some of it was Blazer 124-gr FMJ and Remington 124-gr FMJ. That puts me at 986 rounds through the SAS II UL, thus far.

I had 6 fails to feed (FTF) prior to the pistol course I attended a few weeks ago. I had one FTF during that class and one at the range visit this week. The total FTF count is now 8. 8 of 986 is 0.81 — that is the current failure rate in percentage.

The prior percenage was 0.96, with 6 fails at 623 rounds (back in May 9, 2023). I had several range visits where I didn’t have any failures. This could be due to me learning how to better grip this handgun, as well as me not shooting as much JHP (which tends to be high pressured, which may induce limp-wristing).

Why do I report this as a percentage? So many folks look at failure counts as hard numbers. They want it to be zero. In my opinion, to expect no failures is an impossible ask. Sooner or later, a gun will fail, especially since failures can be induced by the shooter, as well as out-of-spec ammo. Some ammo will be in-spec but will have large hollowpoint projectiles (which do not meet a specification). I don’t think it is logical to expect a handgun to meet every single variation of ammo specification, as well as account for owner-induced failures. So, I post the round count and count of failures and then convert both to a percentage. Percentages have better meaning, IMO. It tells a better story than a raw number of failures.

I still need to purchase the targets that were used in the pistol course I attended (as well as the target stickers).

I’ll post some range footage as soon as I’ve cropped a few sections for viewing. I mainly shot at 7 and 10 yards, some at somewhat fast paces. I also tried to practice accuracy. I shot several times at 15 yards, too. I’m still struggling with grip. I keep readjusting my weak hand after a shot — I need to find a better way to stop doing this. I’m subconsciously doing that.

Categories
BATFE Firearms Advocacy Groups Firearms Policy Coalition (FPC) Guns of America (GoA) pistol brace

Fifth Circuit Once Again Rules Against the ATF’s Pistol Brace Ban, As a Final Rule

I just got a Youtube notification from the MrGunsNGear channel regarding the current state of the suit between plaintiffs and the ATF regarding the current pistol brace ban.

I’ll link the Youtube video below.

In the video’s description:

The Fifth Circuit has once again ruled against the ATF’s pistol brace ban / Final Rule for FPC and it’s members but the fight isn’t over.

Mrgunsngear – Guns ‘N Gear Reviews

If you’re a member of the FPC, a family member of the defendents that filed the suit, or a customer of Maxim Defense, you’re covered.

If you’re outside of those groups, then you currently are not covered, but expect those organizations to submit for coverage in the next few days.

Categories
1911 2011 AF1911-S15 Alpha Foxtrot ammo Bul Armory defensive ammo SAS II Ultralight training

Another 1911 Range Visit / Upcoming Training

Once again, I took the Alpha Foxtrot S15 to the range, as it exhibited some failures during my last range visit, which I believe I documented on this blog.

I also forced myself to shoot the SAS II UL this go-around, since I’ve been neglecting the gun (and I’m also carrying it).

I brought some of my open boxed SD ammo to test the S15, as I initially thought it was having issues due to bad ammo. Another culprit could have been the mag (there was one magazine in particular that was having issues). Another culprit could have been me – I’d shot the gun toward the end of the visit and I was probably getting tired (hand/wrist/arm fatigue).

Right off the bat, I got two fails to feed, with the suspect mag (I’ve marked it). I ended up stopping everything, emptying the mag of ammo, and putting the ammo in a different magazine. The failures stopped.

I’m thinking I might ask Shield Arms to replace this mag. The mag is new and should be covered by manufacturer’s warranty. It’s odd that the failures don’t always occur, though. The ammo it was choking on was Sig Sauer V-Crown 147-gr JHP.

It also failed once when shooting Remington Golden Saber 147-gr JHP. It ate 21 other Golden Sabers without issue, though.

Those were the only failures, so it wasn’t really all that bad this time around.

I’m at 623 rounds through the S15 now. The gun is uncannily accurate. It doesn’t seen to be as snappy as the SAS II UL, but it has better grip surfaces (by far). Now that I know that it’ll eat JHP without issue, and now that I’ve tested the mags, I can actually consider carrying this gun now, although I’ll keep testing it (I’m still wanting to carry the SAS II UL, too).

I’m at 661 rounds through the SAS II now. I shot 38 rounds tonight, all Herters Target 115-gr FMJ. There were no hiccups or failures. I shot all the ammo at 10 yards, quickly (since I’ve the optic installed).

I’ll be working on posting range video footage this weekend, of both guns. I have footage from the last visit but the settings were out of whack and the field of view wasn’t the best (the framing was off-center, as well).

Next week, I’ll be attending my first handgun course. The plan is to use my current carry gun (SAS II UL). I’ll be bringing my Glock 19 as a backup gun, in case they state my SAS II is too small and in case the SAS II has a breakage. I’ve other guns I can consider as backup guns but most of my guns are DA/SA and I’m more used to SAO nowadays. I’ve several striker fired duty- and compact-sized guns but I’ve no holsters for them (nor extra mags). At this point in time, the Glock 19 is my best option (I’ve extra mags and several holsters for it).

I plan to shoot Blazer 124-gr FMJ for the course (was told that I’d need 200 rounds, so I’ll buy 4 boxes of 50). Blazer is reliable for me, but so is the Herters Target, so I may buy that brand instead, although the Blazer is just a few dollars more.

I was planning on a rifle course too, but I need the time to purchase mags and magazine pouches that’ll fit my carry belt. I may have to wait until next year for that, although I can also take a rifle course by XCal. We’ll see.

Categories
Alpha Foxtrot ammo defensive ammo SAS II Ultralight

This is how $90 of SD ammo appears…

I went to Cabela’s to get some SD ammo and was actually looking to buy Sig 365 SD ammo to test with my Bul Armory SAS II. They only had the Sig 365 in FMJ, though. I’ll keep looking for it or order it online.

Since I was there, I bought what they had, and focused on types that I haven’t shot before. I bought (from top to bottom, left to right) all 9mm, Sierra Outdoor Master in 124-gr, Hornady Custom 124-gr XTP, Federal Punch 124-gr, and Barnes Vor-TX 115-gr. Those are boxes of 25 rounds each.

I also have an unspent box of Koenig Defense 110-gr JHP (from the last time I visited Cabela’s).

I’ll be shooting these 125 rounds of ammo from the Alpha Foxtrot S15, since I’ve not tried shooting good ammo from that handgun yet. Maybe I can shoot half from the AF-S15 and half from the SAS II, since I’d prefer to be practicing shooting my current carry gun.

Categories
9mm AF1911-S15 Alpha Foxtrot Grand Power limp-wrist P11

Summary of Range Session – 9/8/2023

I went to the range tonight because I wanted to work off some steam (been busy with work and have been stressing).

I’d been thinking about my Grand Power and recently had someone reach out to me on YouTube. She said that she has the P11 and that she’d been having the exact same issue (fails to return to battery, or FRTB), but that her husband didn’t have the issues when shooting it. She hinted that it may’ve been limp wristing that caused it.

I did a bit of research and it seems that limp wristing can cause FRTBs.

I never realized that I could’ve been limp wristing the gun. It is rather slick, with no significant texturing on the grip.

I decided to begin taking it to the range to see if I can shoot it without experiencing the FRTBs. I shot 50 (well, 48) rounds of Koenig 110-gr JHP Match through it tonight and I didn’t have any failures. Note that the gun is configured a bit differently since I last shot it — I’m using a small Hogue rubber grooved slip-on grip, which helped with getting control of the handgun. I was ensuring I had a strong grip on the gun. I’ll continue to bring it to the range, shooting 50-100 rounds from it when I can, and trying to practice good grip technique so that I’m accurate as well as not limp-wristing.

I also shot 155 rounds from the Alpha Foxtrot S15 1911. The ammo of the night for that gun was Herters Target 115-gr FMJ with a splash of Fiocchi 115-gr FMJ. Whereas I didn’t have any issues last range visit, I had 8 FTEs this range visit. I shot the same ammo last visit, as well.

The issues could be (possible solutions are below, in italics):

Bad magazine – I shot with all six mags and only one mag generated failures, so I kept shooting with it to see if I was limp-wristing and causing the failures. I shot many rounds through that mag tonight and there was only one time where I got thorugh a mag without failures. I marked the mag and will put it aside. The plan is to use the other mags next range visit – if the failures stop, then I’ll know that the mag is the problem.

Bad box of ammo – I bought 200 rounds of Herters (2 x 100-round boxes). I got through one box with only two fails to extract. The other box had five FTEs. The Fiocchi had one failure – not only did it the spent case not extract, but it was still fully in the chamber, and the slide did not lock back (it was the last round of the mag). Also, I noticed that the slide would sometimes seem to be moving a bit slower than normal after a round is fired, which is usually indicative of inconsistent amounts of powder within the case. As well, some of the ammo looked funky where the case crimps onto the projectile, as if the ammo had possible QC issues. I’ll bring some good JHP with me next range visit, to see if the issues still occur with good ammo.

Limp-wristing – I won’t count this out, since the FTEs started occurring mid session of my range visit. I tend to fatigue myself as I practice (this is normal). Next range visit, I’ll test the S15 (and the other 5 mags that didn’t have issues) before shooting any other guns.

I did have fun shooting the Grand Power again. I was accurate with it. I shot it once at 10 yards but the spread was wider than when I shoot the S15 at that range, which I initially thought was odd until I realized that the S15 has far better grip texturing. I ended up sticking with shooting at 7 yards.

The S15 is accurate AF! I spent a large amount of time shooting at 10 yards and was accurate. Not only that, there were times where I was shooting pretty fast and my groups were tight as I shot further out. And that was with irons. This gun is uncanny, but it’s really because of the front checkering on the grip. It’s going to seriously spoil me. I’m already thinking about selling all my other 1911s so that I can focus on 1911s and 2011s that have front checkering. Yes, I can get checkering added to my existing 1911s, but some gunsmiths won’t touch non-US guns and all guns that get checkering will need to be repainted/refinished.

I also now have just under 500 rounds through the S15. I’m slowly accumulating the round count on this gun. I’ve just under 1600 rounds through the GP P11.

Categories
ammo defensive ammo pistol training

I Enrolled in Handgun Training!

So, I’ve enrolled in handgun training. I enrolled in a Pistol II course at my range. (Pistol I was too basic and Pistol III was too advanced — we all have to start somewhere, right?) It’s a 2-day course that is held in the evening. I thinking on using my Bul Armory SAS II UL. They recommend either a duty gun or a compact. The SAS II UL isn’t a little gun. It’s not big by any means, but it’s far from small, so may use it during the course.

I’ll be brining a back-up gun, but I’m not sure which to bring. I can either bring my Glock 19 (it’s similarly sized) or my Alpha Foxtrot S15. The Glock 19 seems to be the better option. I’ve several DA/SA guns, too, but I don’t want to have to deal with DA.

I also need to buy ammo for the course, but I think I’ll just buy ammo at that range, right before the start of the course. I don’t need anything special – it just has to be dependable. I’ve been using their Blazer 124-gr brass FMJ and it’s been good, so I think I’ll jsut buy more of that.

I mentioned SD and training ammo in the title. I’ve always wanted to be able to shoot training ammo that was very similar to the SD ammo that I’d be carrying (I’ve no favorite SD ammo at this moment in time). I did quite a bit of research and found that Federal’s AD9SJ4 (124-gr 9mm) matches the Federal Practice and Defend P9HST1TM100 (124-gr 9mm SD ammo), ballistics-wise. The only thing is, I can’t find any place that has the P9HST1TM100 in stock.

They’ve 147-gr pairing as well: AD9SJ3 (Practice ammo) and P9HST2TM100 (147-gr 9mm SD ammo). The P9HST2TM100 is more easily found, by far, than it’s 124-gr counterpart.

Here’s an example of the cost of the AD9SJ3: Just under $17 for a box of 50.

Here’s an example of the cost of the P9HST2TM100: Just under $48 for a box of 100 – this is legit HST JHP Syntech SD ammo.

Bul Armory doesn’t recommend shooting 147-gr from the SAS II UL, but I’ve had no issues shooting various SD ammo in that grainage, so I think I’ll spend some money on a decent sum of this pair of ammo. I’ll probably buy 500 rounds of the AD9SJ3 and maybe 1 to 2 boxes (100-200 rounds) of the P9HST2TM100.

Categories
Glock magazines PSA

Can the Alpha Foxtrot S15 Be Used With PSA’s Dagger Micro 15-Round Mags?

Can the Alpha Foxtrot S15 use the PSA Dagger Micro 15-Round Mag?

I’ve asked that question on at least one 1911 forum and was told that it wouldn’t work, but no one has tried.

I’m not interested in hearing assumptions.

It either will latch or it won’t

It will either release and drop free from the mag well effortlessly or not.

It should feed properly.

The Alpha Foxtrot S15 is built around Shield Arms S15 15-round mags, which are 3rd-Party mags made for the Glock 43X and the Glock 48. Because of that, the AF-S15 can also use the OEM G43X and G48 mags, although those particular mags have a 10-round capacity.

In the quest to check for yet another source of mags for the AF-S15, I’ve ordered one PSA Dagger Micro magazine, which has a 15-round capacity and can be used with G43Xs and G48s.

I saw that PSA had the mags in stock. I ordered a blem mag with the Micro Slick finish, for $29. Shipping was $9.99 and the total was $40.72 (shipping is always a lot and I didn’t need anything else from PSA).

Note that the Dagger Micro mags are polymer-coated, even around the mag latch area, which means that this will be a wear point, as the AF-S15 uses a metal mag catch within it’s mag well. I’m also curious if the mag will slide easily into and out of the mag well, and also unlatch without hangup issues.

I ordered one mag to test, initially, as I didn’t want to order 2-3 only to find that they won’t work.

The test results will determine if I order more (specifically for range use).

I’ll share my findings with the rest of the world, as I keep seeing folks asking this question or outright verbally assuming that the Dagger Micro mags will work with this gun.

Categories
Beretta DA/SA handguns PX4 Storm The Firearms Blog

The Firearms Blog – 2023’s Most Underrated Pistol

It’s nice to see two very knowledgeable individuals who understand how good the Beretta PX4 Storm is!

If I weren’t on a 1911/2011 fixation, I’d probably be shooting this gun more!

Categories
1911 2011 handguns

What’s My Next Gun Buy? Also, Thoughts On Staccato

So, I’m done with my gun purchases this year. I’m quite happy with my recent purchases.

What’s for next year’s gun buy?

I’m looking at the Costaint COS21, which is a semi-custom 2011. It starts at $2200, comes with 2 x 17-round mags, and is optics-ready

I’m also considering the Stealth Arms Platypus – I’m aware that this isn’t a true 2011, but more of a double-stacked 1911 that uses Glock mags. I’ve spec’d one out at $1535 with all the options I want. Not sure if it comes with mags, though, but I can certainly order them without issue and it won’t break the bank!

Another consideration would be the Bul Armory SAS II UL Comp ($1890). Or, the 4.25″ SAS II Tac ($1760).

I’ve also been looking at Alpha Foxtrot’s single stacked 1911s, Fusion Firearms’ single stacked 1911s, and Bul Armory’s single stacked 1911s. No, I don’t need a Dan Wesson. I’d be happy with one, but I’d also be happy with any of the aforementioned 1911s.

Whatever I’ll buy next will be almost certainly a 2011 or 1911, though.

Someone asked me on Reddit, “Why not a Staccato?” I’ve no interested in a Staccato at all. Why? Everyone has one. It’s is THE gateway 2011. I don’t necessarily want what everyone else has. The Staccato is $1000 more than my most expensive handgun (the Bull Armory SAS II UL), but I’m that guy that believes in diminishing returns.

A Staccato C2 is $2000. A Staccato P is $2199. A Staccato CS (probably what I’d want and is very equivalent to the SAS II UL) is $2499, which is $1000 more than the cost of a SAS II UL but I’m not getting double the value of a SAS II UL.

I get that the Staccatos have no MIM and that they’re built in the US. I’m not afraid of MIM – most good gun makers that use MIM have never had issues with dependability of those MIM parts. I’m also not afraid of buying high end items from foreign companies.

Staccato mags are expensive at approximately $70…that’s $20 more than the SAS II UL mags, which I thought were expensive AF but still bought 2 of them. The saving grace is that each Staccato comes with 3 mags.

Staccato optic plates are REALLY expensive, at $160 for the 507K optics kit (they don’t include them with the gun as a package deal, either).

Why would I pay $2500 for a Staccato CS and then want to also spend another $300 on optics mounting gear and two extra mags? That’s close to $3000 at that point.

Basically, I don’t have a problem not owning a Staccato while owning Bul Armory 2011s. I’m not a brand snob and a non-Staccato will suffice, while I’m absolutely sure that I’ll shoot a non-Staccato as well as I would a Staccato.

Categories
1911 iron sights RIA Rock Island Armory Rock Ultra Tac Ultra

RIA Rock Ultra MS – Front Sight Fell Off

I’m not sure why I haven’t posted about this yet, but a few months ago (Jan/Feb timeframe) I was cleaning my RIA Rock Ultra MS and noticed that the front sight was very loose. I’m not sure what occurred to loosen it, but I’d been carrying that particular gun for a while and hadn’t noticed that issue until it happened.

I was carrying that handgun in a Tenicor kydex holster, but the kydex doesn’t touch the front sight. I do remember dropping the gun once, on a carpeted floor. I’m thinking that might have been enough to dislodge the front sight. I can’t remember how the gun landed, but if it landed on the front sight, that would explain why the sight was loose.

The front sight was loose enough to where it slid all the way out of the dovetail with very little effort. Not only that, but the dovetail edge was surgically sharp and sliced my finger badly (had an issue stopping the bleeding).

When I cleaned the slide of blood, I saw that it looked as if the only thing that kept the sight in place was red threadlocker. I could see old threadlocker on the bottom of the sight and in the dovetail. I’m almost certain RIA didn’t fit this sight to the dovetail, otherwise I wouldn’t have been able to slide it back on and off the slide.

I’ve ordered another sight (from Armscor) but do not have the tools needed to perform an installation (I’ve no vise, I’ve no files, I’ve no sight pusher).

I can either order the needed tools or give the slide and sight to a local gunsmith so that they can install it.

After I had the issue, I couldn’t carry the gun, but I ended up installing the 9mm barrel to my 22TCM RIA Tac Ultra so that I could carry that gun instead. That gun also fit in the Tenicor Certum holster.