Categories
AK AK-P CNC Warrior muzzle brake Palmetto State Armory PSA

Success – Mounting CNC Warrior 4-pc Brake to PSA AK-P!

I posted about my failures in mounting the CNC Warrior 4-pc brake onto my AK-P.

I returned that brake but wanted to try again with another brake, thinking there was something wrong with first brake.

I bought a used one a few weeks later (slimmer version but has the same threading). That one would not screw down fully flush, either. I decided to keep the brake but was going to ask for an RMA of the pistol, thinking there was something amiss with the threads or muzzle.

Last night, I did some research and found a few folks having the same issue but with other rifles and pistols (some non-AKs). One guy said he took a copper brush to the threads of the muzzle and the threads of the brake, and had success in fully screwing down the brake. I tried it and it worked! There was a lot of crud on the threads of the muzzle and brake (the brake was used and not clean).

I’ll be taking the AK-P to the range this week to test the new brake.

Categories
7.62 x 39 AK AK-47 AK-P Arsenal Canik PSA SAM7UF-85 TP9 Elite TP9 Elite Subcompact

AK Range Day!

Today’s range day was deemed AK range day!

I took out the Arsenal SAM7UF and PSA AK-P. The former is a milled rifle that I’ve owned 2-3 years but never shot until today. The latter is an AK pistol that I bought 3-4 years ago and have been shooting off and on.

Both are dreams to shoot. I’ve no range footage because I hate recording when shooting long guns (my mounting point doesn’t agree with the rifle shooting position).

I shot the SAM7UF first. I thought it would be hard on my shoulder but it was rather mild, especially considering that the folding stock’s makeup is usually something that folks complain about. It’s supposedly not easy to shoot, but the stock didn’t bother me (I’ve the rails covered with paracord).

I thought the recoil would bother my shoulder with that stock but much of the recoil never made it to my body. The milled rifle is heavy and the heft absorbed much of the recoil.

I shot out to 25 yards. I wasn’t hitting point of aim but I think it’s because the rifle may be zero’d to 100 yards. I need to study the method of zeroing AKs. When I do, I’ll revisit the range with the SAM7 and zero the gun (on the 25 yard range, since I’ll have a difficult time seeing further than that).

The gun has some blast, too. It seems it has more blast than my other long AK (a bastardized AK-63D from Classic Firearms). I shot 30 rounds before I switched to the PSA AK-P.

The PSA AK-P is a flamethrower but I already knew that. I didn’t feel like squinting trying to hit 25 yard targets so I moved the target closer, to half that distance.

I’ve a red dot sight for this firearm but I removed it when I last took it out, as I hated it. I’m decently accurate with the iron sights, so I shot 30 rounds at one of those target papers that have 5 targets on it. all but maybe 4-5 landed on paper (because the targets on the edge of the paper don’t leave much room for error and I was doing a lot of quasi double-tapping). The groupings were pretty tight for the rate of fire I used. I also shot while standing. A picture is below.

12 yards, standing w/ irons…

The gun bucks and throws fire. Additionally, it got HOT! I burned myself once and had to wrap it up in rags before I put it in it’s case so it wouldn’t melt the inside foam. Also, keep in mind that this is a pistol and the brace is HARD on a shoulder with the kick of an AK pistol. I also tend to pull the gun in really tight while gripping the mag. I’ll be bruised tomorrow.

Lastly, I always try to shoot my carry gun when I’m visiting the range, so I shot some defensive ammo from the Canik TP9 Elite SC. This ammo is something new to me, but I bought a batch of it from my range 2 nights ago, since it was on sale at 19.99 for a box of 50. The make and model is Federal 115-gr Hi-Shok JHP. I bought 250 rounds of it, not knowing if it was good or not but liking the sub-$20/box price. I later researched the ammo and found that the ammo is GOOD and that law enforcement uses it. I’d assumed that since the box was white and since the ammo wasn’t being sold in 20-round boxes, it was range ammo. It is not. So, tonight I bought 100 more rounds of it just to shoot with tonight. It shot well, without hiccups, and without feed or extraction issues. I may end up trying to buy it in bulk but my research shows that when looking for it online, the low price is 0.49/round, which is a bit high compared to what I found at my range. My range will carry it until it runs out and won’t let me buy in bulk anymore (the person that sold it to me apparently shouldn’t have let me buy so much without shooting – I bought it after my shooting session).

Right now, I’m right at 482 rounds shot through the TP9 ESC. Expect that number to go quickly as I continue to practice with it.

The AK-P currently has 370 rounds through it. I could shoot it more but for some reason, shooting that gun indoors gets old quickly (it has tremendous blast). I looked at the internals (trunion, bolt, and bolt carrier) and the parts aren’t beat up (this model is a GF3). Most AK snobs hate US-made AK, and think they’re sub-par. If I have any issues, it’ll be something like fire-pin issues, or something stuck in the firing pin channel (primer metal), or maybe a loose firing pin retaining pin (which probably won’t be an issue, as I’ve checked it and it is not loose at all). I will probably buy another firing pin, in case the OEM one breaks.

The SAM7UF only has 30 rounds through it but I’ll try to shoot it more, now that it’s no longer virgin.

Categories
23901 4-pc AK-P CNC Warrior muzzle brake PSA

CNC Warrior 4-pc Brake for PSA AK-P!

Hello!  Yes, it has been a while since I’ve posted.

What have I been doing?  Ordering ammo when I can.  Yes, ammo purchases during Covid times can be expensive, but I’ve been buying when I see good buys, even if the purchase is limited in ammo count.

I also occasionally purchase gun parts.  Two weeks ago, I ordered the CNC Warrior 4-pc muzzle brake for my AK-P.  Specifically, I bought part number 23901, since it will fit on the muzzle threads of the AK-P (although they also sell adapters).  I ordered it but didn’t expect it to ship for a long while since these are typically on backorder.  I received it earlier this week.

One thing I’ve noticed is that, while the OEM krink booster fits without issue, the 4-pc brake is shallow-throated…it will NOT screw all the way down. It gets maybe 3/4ths down then stops.  Pics and a quick video are below.

I took the 4-pc brake apart then screwed it down again, then looked down the inside of the brake (for the safety nazis, the bolt was removed beforehand)…I could see the muzzle end of the barrel hitting the backstop of the threads on the brake. You will not be able to screw down this brake to the point that the retaining pin latches into place…far from it.

I’m not sure how to secure the brake. I’m not going to use red threadlocker, as I don’t want a near-permanently fixed brake (I will probably be trying other brakes or going back/forth between the krink and 4-pc brakes).

UPDATE – 1/1/2021:  I sent the below pictures to CNC and asked them what could be the issue.  They’ve provided me with an RMA.  They want me to send it back.  I’ll send it back tomorrow.  Someone on the PSA FB group told me that they had a similar issue and that they had to be provided another brake.  I should receive a new brake soon.

UPDATE – 1/17/2022: I resolved the issue and have mounted a slightly smaller CNC Warrior 4-pc brake.

This is the OEM krink booster.  Notice how it sits flush with the front sight block (FSB).
Krink booster is removed.  Note the distant between the bottom of the threads and the end of the muzzle…that’s a pretty significant distance.
This is the CNC 4-pc brake, screwed down until it bottoms out.  I did this with the brake taken apart so that I could see inside the brake to see what is obstructing it’s installation.  It can’t screw down enough for the retaining pin to latch into place.
This view is looking inside the CNC Warrior brake, from the muzzle end. This shows that the brake is very shallow-throated when used with the PSA AK-P. There is beveling (not sure if that’s the correct word) that is preventing further tightening.
This shows how shallow the thread backstop is for the AK-P.
A video showing the issue.
Categories
AK-P AK-V AKM charging handle Michigam AKM Owners SAM7UF

I’ve Installed Charging Handles Onto the AKs

I bought two AKM charging handles from Michigan AKM Owners.

I’d planned on mounting them on my PSA AK pistols.  I mounted one on the AK-V and the other on the AK-P. 

I had to remove it from the AK-P, though, because I have an enhanced safety on it and I can’t use the charging handle and the enhanced safety at the same time (the charging handle interferes with the usage of the safety.

I put it on my SAM7UF instead.  They look great and the handles offer good traction.  They are easy to mount, too, although I need to go back and add thread locker so that they don’t come off.

Mounted on the AK-V
The safety on the AK-P won't work well with the charging handle.
Mounted on the Arsenal.
Categories
AK-P Cube+ fail Polaroid PSA

First Range Visit With The AK-P

First things first, the AK-P is NOT a good firearm for indoor shooting.  It was seriously loud.

My range notes are below:

  • First time shooting a pistol in 7.62×39.
  • Oh man.  The bang is LOUD and BRIGHT (my range is an indoor range).
  • I shot 3 different types of mags (two metal imports and one 10-round Magpul).  There were no issues.
  • The gun got hot but was still manageable.  I shot all the rounds standing up, but I did change my grip from handguard to mag (mag grip was better).
  • I recorded but the footage was corrupt when I got home and checked it.  🙁  WTF Polaroid…this isn’t the first time this has happened.  All the more reason to visit the range again soon.
  • I should think about shooting this outside.  It is super loud (I’m not exaggerating).  I’ve no doubt it was pissing off the guys next to me.
  • I was mainly hitting upper left (I usually hit low left), but was hitting bulls-eye at the beginning…I think I got fatigued toward the end of the 1-hour session.
  • All ammo was RSA FMJBT 7.62×39.
  • Also, note that I didn’t zero the firearm, but it shot well enough (I hit the bulls-eye several times when firing the first mag).

What ticked me off was the camera not working.  That’s inexcusable, IMO.  It recorded but the footage corrupted.  I may need to get something that’s more dependable.

I plan to go again tomorrow in an attempt to capture footage again.

Categories
AK AK-P AK-V CAI NAK9X pistol PSA

PSA AK-P is on the way!

Today I ordered a red PSA AK-P with an SBA4 brace.  This is an AK pistol chambered in 7.62×39.  This will be the first AK I bought that has actual wood.  I was going to get a Magpul version but was torn on what color of polymer to get.  Then I saw that they had red wood and the red is deep in color.

I wanted to get an AK pistol before they were banned/restricted. (Sorry, I’m not interested in AR pistols at this time, although that may change; at one point, I wasn’t interested in 1911 nor AKs.)

I’m not sure when this will be arriving, as I ordered it the Wednesday (night) before Labor Day.  It may arrive this coming Tuesday or Wednesday.

As well, I tried to order a PSA AK-V (9mm AK pistol), but I spent too long trying to decide between it and the Century Arms NAK9X…I tried to add the AK-V to the shopping cart and found that someone already bought it…it was the last one.  :/  So, either I wait for more to be available or I get the NAK9X.  I wanted the PSA due to it’s warranty, but they are very similar.  I believe the PSA is cleaner.  Neither have been heavily reviewed.  I can actually wait on this purchase.  Maybe I can find something cheaper than these two, like a decent Draco with a tube brace.

UPDATE – 9/2:  Well, it actually shipped today (9/2/19), although UPS says it’s not shipped yet — only the shipping label has been created.  It’ll actually ship tomorrow, probably (9/3/19).  This is so that people have an idea of how fast PSA ships firearms.  I ordered the night of 8/28.  That was a Wednesday night.  It is currently Monday (Labor Day).

UPDATE 2 – 9/3:  And, it really shipped today; so sayeth UPS.  It’ll be here on Thursday (9/5).

UPDATE 3 – 9/7:  It is here (I picked it up yesterday) —