Categories
Glock 22 Hogue P220 PX4 Storm Talon Grips

Making up for lost time…

What have I been doing while quarantined?

Well,  I bought Hogue rubber grips (with finger grooves) for my PX4 Storm Compact.  I’ve been carrying that gun the last 6 weeks, non-stop.  I’m not sure why I moved from the XD45 to the PX4, but when I was going through the safe and checking to ensure the firearms weren’t in need of oil, I noticed (again) that the PX4’s grip is rather slick.

I researched online to see what others were using to enhance the grip of this gun.  I didn’t want to use Talon Grips, because that involves adhesive.  I have Talon Grips on my Glock 22 and it was a pain to ensure they were in the correct spot (and then I had to heat up the tape to ensure they stuck).

I have Hogue grips on my Sig P220.  I like the way they feel (I like that slightly tacky rubbery feel), so I decided to go with Hogue again.

These grips work very well for this handgun but one con is that they make the grip thicker in girth than it already is (it’s thick enough without adding anything).  They feel very good, though.  They were also a bit difficult to install, as the rubber is stiff (it is recommended to use a heat gun or hair dryer to heat up the rubber, which makes the rubber more pliable – I didn’t use either).

I bought some other toys for other firearms as well, but I’ll post about those separately.

Categories
124-grain 147-grain American Eagle Breakfree CLP DA/SA failure to return to battery flat-nosed FRTB Geco Grand Power grease Hogue oil P11 Mk12 P220 Remington Sig Sauer TW25B UMC

More Grand Power Testing

I’ve been getting an influx of comments on my last Grand Power YouTube video.

Many people think that I need to be using oil (one person stated to not use TW25B and another recommended to use oil and not grease).

I tested the theory that I was using the wrong lube.  I stripped off the TW25B from the helical cut and breech area of the barrel and used a light coat of Breakfree CLP instead…I kept grease on the rails, though.

Remember, on my last visit, I fired 263 rounds of various ammo (50 x Tula steel-cased, 200 x Remington UMC 147-grain flat-nosed FMJ, and approx 24 rounds of Winchester Personal Protection JHP).  Of that ammo, I had two failures to return to battery (down from “many” failures), both of them being with the Remington ammo.

At last night’s range session, I used 100 x Remington UMC 147-grain flat-nosed FMJ, 50 x American Eagle 124-grain FMJ, and 28 rounds (of a box of 50) of Geco 124-grain FMJ, for a total of 177 rounds.  I had five failures to return to battery (FRTB).  The first happened on the 3rd magazine.  Then the 4th, 5th, and 6th magazines.  The gun wasn’t dirty, but remember, I was using a thin coat of oil vs a coat of gun grease.

Yeah, so much for that theory.  I had less failures during my previous range visit with the P11, and shot maybe 100 rounds more, too (with Tula being 100 of that, and both Remington UMC and Tula are very dirty).

But here’s a revelation…of the five failures to return to battery and of the 177 rounds, guess which brand failed the most in this gun?  Remington.  All five failures were with the Remington.  I made a point of paying attention to which brand I was shooting and keeping notes on each box’s tabs.  I also ejected each round that generated a FRTB.  In one case of FRTB, I found that the front lip of the case had bent when the gun tried to ram the round into the chamber.  I decided not to fire that round.

Here’s a picture:

If it’s difficult to see the damage, here’s a video.

So, maybe it’s a combination of the oil I used as lube and the ammo?  No, I think the ammo is the issue, as I shot 75 rounds of ammo AFTER the Remington that didn’t get hung up at all.

This gun does NOT like the Remington ammo I’m shooting.  I’ve other Remington ammo (non-flat-nosed and 115-grain FMJ) that I can test but I really don’t think I need to test any more.

I cleaned the gun and looked at it’s internals last night.  The claim that the oil is easier to clean after a range session is false.  The oil migrated to the slide and coated the whole underside of it.  In fact, it was everywhere and I didn’t use a lot…just a thin film.  It took quite awhile to clean.  The gun wasn’t quite that bad when I used grease as the primary lubricant.  The oil collected the carbon exactly as the grease did (it basically made mud), but I can’t contribute the failures to the oil.  All I know is that I had less failures with the grease but if the ammo is the problem then all perceived lube problems are exonerated.

I’ll post the video once I’ve edited it and posted it to YouTube.

UPDATE — here’s the video:

For now, I’ll continue to use the CLP as the primary lube.  I’ve even put it on the slide and frame rails.  I’ll watch for wear and/or trouble for awhile.

I also took my SIG Sauer P220 and gave it a quick run to test the new Hogue rubber grips.  Man, that gun is a beast.  Recoil is less of an issue with these grips.  I’m able to put ammo (half the mag, in this case) in the red, too.

All DA shots, first 8 rounds, at 7 yards

I fired a total of 44 rounds (I had five mags that have been loaded since Jan 2015 that I wanted to shoot…Perfecta hardball in 230-grain).  The gun ate it all up without issue.  My aiming did get progressively worse, though.  I might need to get glasses I can use at the range (or it might be time to have my eyes checked again), as I was having a difficult time seeing the front sight and my vision got worse as I shot.

I brought the Glock 19 and intended to shoot it, but got too engrossed with the P11 (let’s face it…as my EDC and with my recent issues, it needed the attention).

So, this range visit was very valuable for me, as I learned that not all ammo is created equal.  I still have a lot of Remington flat-nosed ammo left (I bought 500 rounds of it).  Some of my other guns will eat it without issue, so I’ll use it up, but I won’t be buying any more of it.

Grand Power P11 testing – accurate as hell!
Categories
cleaning mat Equinox grip screws grips Hogue P220 rubber

New Grips For The P220 Equinox!

I asked for a few things for Christmas:

  • A Sig Sauer P220 cleaning mat
  • A set of black hex headed screws for my P220 Grips
  • A set of Hogue rubber grips.

I’ve installed the grips but not the black hex head screws:

The OEM grips look better, but the rubber grips feel better and will no doubt be better at the range.  The don’t look bad, but don’t look as good as the black stained wood grips.  They were simple to install.

I can’t wait to take these to the range.

Categories
failure to chamber P220 range SP2022

Visited the Range Today!

First 15-round Mag Thru the 2022…bulls-eye is a DA shot!

5 Magazines

Cleaning…119 Rounds of Carbon!

All clean!

I finally made some time to visit the range so I could break in the SP2022.  When I bought the gun, I also bought two 50-round boxes of American Eagle 115-grain FMJ.  I filled up all four mags with that ammo so that I could break in the magazine springs.  When I paid for range time today, I also bought two more boxes of AE.

I fired 119 rounds through the Sig Pro today…8 magazines worth.  I had one jam, which is great, but I don’t exactly know WTF happened…it wasn’t a failure to feed, since the first round fed…it wasn’t a failure to extract, since the brass didn’t need to be extracted at the time of the issue.  The trigger wouldn’t release the firing pin.  Also, the slide pretty much locked up…I had to muscle it open.  Once that round popped out, I slingshotted the slide…no more issues.  That was the only round of 119 that gave me an issue with the Sig Pro today.  Also, all four of the mags were new but two of them never had rounds in them (I only filled two of them).

The P220 experienced a very similar issue with a round not wanting to properly chamber or fire, although it wasn’t the first round or mag.  Maybe that was a limp wrist issue.  Or maybe it was one of the new magazines (three of the five are new).

I fired both the 2022 and the P220, alternating between the two.  I’m thinking I should’ve just focused on one gun at a time, because my aim wasn’t where I wanted it to be.  I sighted the bulls-eye but kept hitting left of it and sometimes upper left.  I did hit the bulls-eye a few times but I was very inconsistent.  The target stayed at 7 yards the whole hour.  This “aiming” issue might just be a trigger pull issue, as I dumped 4 mags in one target and there was a giant hole to the upper left where I consistently hit.  I need to work on my trigger pull (on both guns), I think.

Also, most people complain about the placement/size of the slide release on the SP2022.  They also tend to ride the slide release, meaning the last shot doesn’t lock back the slide (because they’ve triggered the release).  That didn’t happen at all during my first range visit with this gun (I made sure my thumb was away from the release lever…it took a conscious effort).

The SP2022 got the majority of my attention today, not only because it’s new (hell, they both are), but because it is easier to fire.  I hate to say this, but I hate the recoil of my P220…or maybe I just need to fire it more.  It has more recoil than what I’m used to and I’m finding it difficult to get used to.  That slide is still stiff as hell, too, although the mags are breaking in very well.  The next range day I have, I’ll spend an hour with the 2022 and an hour with the P220, just to give them dedicated time.

I also bought a new range bag, since I felt weird carrying my two beater bags to the range today (one was a cheap NRA bag dedicated to ammo and supplies (lube, barrel rod, screw driver set…POL-type stuff) and the other (an Army map case)  had my guns in the OEM gun cases.  The range had a store and had a Bulldog XL range bag that I bought, which is much nicer than that map case and the cheap bag that the NRA sent me.

Lastly, it looks like I might be moving to California to move nearer to my wife’s family.  I’ve found that I can keep the guns I bring with me (in fact, it is advisable to load up on any guns before I move, as the CA approved gun list has severe limits).  I’d still need to find a job in CA first, then a house within a specific price range that is a reasonable distance from the job.  This is ridiculously complicated, to the point that my guns definitely take a backseat to job and house search.  Wish me luck!

Categories
ammo ammunition Cabelas Dicks magazines P220 SP2022 Walmart

My Magazines Have Arrived!

A few days ago, Cabelas had an online-only Sig Sauer magazine sale…$22.49 for each magazine in stock.  Since Sig mags tend to be expensive (running around $50 each), I decided to get three to augment what my P220 came with.  It came with 2 x 8-round magazines.  I bought 1 x 8-round mag and 2 x 10-round magazines.  Note that this sale ended yesterday.

They arrived this afternoon and I immediately cracked them open and loaded them with rounds so that they’d break-in.  I also marked all five magazines (I numbered them), in case I needed to track mag failures.  Of the five, I loaded one with my Hornady JHP 185-grain rounds (which reminds me…I need to find an outdoor range so that I can test the JHP to ensure the gun will shoot them.

I also ordered 2 x 15-round magazines for my Sig Sauer SP2022 9mm that hasn’t arrived yet.  This is the gun that people have a difficult time finding mags for, so I wanted to take advantage of the sale…once I saw that they had them in stock, I ordered two.  The SP2022 only comes with one magazine, so I probably needed to get extras anyways.  I haven’t bought 9mm ammo yet…I’ll buy a box or two of FMJ and a box of JHP in 9mm when I pick up the gun from the FFL.  I marked these mags, too.

Hopefully, I’ll be able to go shooting this weekend and try out the new gun and extended P220 mags.

My next project will be to find an online store where I can order ammo in bulk, to cut costs.  I buy my ammo from Dicks since they’ve been having holiday sales, but I think I can do better by buying online.  I’d check Walmart but I’ve never been able to get someone to help me in the firearms section.  :/

Categories
.45 9mm compact firearms handgun magazines P220 safe Sauer Sig SP2022 Stack-On sub-compact

Introductions

I tend to segment my life experiences into silos.  I do not have a one-size-fits-all blog.  There’s a reason why I do that.  I’ve blogs about Unix, PDAs, Apple products, Subarus, and others.  A reader that cares about Unix might not care about Subarus.  I believe a blog has to have a general theme…how do you mesh all of those blogs into one without looking like a skitzo?  You can’t.

Anyways,  I’ve a new hobby.  Last month, my wife bought me a handgun.  What make?  Sig Sauer.  What model?  A P220, but not just any P220…she got me an Equinox.  That’s a gun created by Sig Sauer’s custom gun shop.  It’s full size and calibered in .45 ACP.

It was supposed to be a surprise Christmas present but she ended up telling me because the sales people she was talking with told her to inform me so that I could give her a good idea of what I wanted…for all they knew, I’d not like the gift.  A few weeks before she bought it, she’d been asking me gun questions but I thought she was asking idle questions (she does that from time to time and knows a bit about weapons — 20 years of Army service that she accrued).  She asked me my preference of caliber and make.  I told her .40 and Sig Sauer.  Well, she took that information and went back to the sales people and told them.  They recommended a .45 instead, as .40s are known for being a bit snappy in recoil.  So, we were Christmas shopping and she told me that she wanted to show me something and that she wanted me to close my eyes…she then led me to the gun shop in the store (the Ft. Belvoir Exchange).  When I opened my eyes, I was shocked.  She showed me the gun she wanted to buy me.  It was the Equinox…it’s all shadow and light, with dark wooden grips.  We went to look at other guns at other shops over the next few days but we settled on the Equinox and bought it the day before Thanksgiving.

That’s the greatest present she’s ever given me and it was also very thoughtful.  It was also pricey, as far as guns retail for.  $1040.

I took it to a local in-door range the week after I got it.  It shoots great.  The trigger is awesome in both DA and SA modes.  It does have recoil, however.  The previous calibers I’ve fired (they were a friend’s guns) were 9mm and .40…both Sigs.  In comparison to that .40, my P220 isn’t offering less recoil.  They both feel about the same.  Now, I don’t remember what .40 Sig my friend had, but I’ve the feeling I’d have been happy with a .40 Sig.  That’s not a huge issue, though…I’m happy with my gift!

The P220 comes with 2 8-round mags.  The mags are stiff as hell out-of-the-box and have to be broken in.  Load rounds into them to exercise the springs.  They loosen up over time and with use.

The P220 also has a very stiff recoil spring that will loosen up over time and use.  As it is now, it is difficult to rack the gun.

I’ve put approximately 100 rounds through the gun so far and the mags and recoil spring have loosened a bit…they’re still a bit stiff, though.

I’ve a gun safe, especially since I’ve three kids.  I’ve the Stack-On Model # PS-508-12.  This safe is small but has enough room for 3-4 handguns (maybe even more if nothing else is in the safe).  BJs has this safe, as well as an assortment of Sentry safes.  I liked this one because it was a bit under $60 and was low in profile.

Also….

I bought another gun.  I sold some car parts to a fellow Subaru owner and used the money to buy a Sig Sauer SP2022 in 9mm.  This will probably be my carry gun.  Yes, it is rather large to carry, but it is sold as a compact gun.  It is about the same size as many compact guns of other makes.  Note that the SP isn’t yet in my possession.  It is currently being delivered to my local gunshop.  I got this gun for $389.  I’ve also ordered two extra magazines (at $22/ea from Cabelas…during a sale).  This is key, because the gun only comes with one magazine and people complain that extra mags are expensive…I’ve heard quotes of $50/ea.

So, I can carry this gun but also practice with it to hone my basic handgun skills…9mm ammo is cheaper than .45 ACP, so there’s a lower cost factor with this gun.

I did not want a sub-compact gun.  I held a Walther PPK in .380 and could barely hold the gun, it was so small.  I’ve big hands, so I need a gun with substantial grip, even if it means it’ll be more difficult to carry…I can’t stand when my hand is hanging off of a gun grip, as it doesn’t feel comfortable to me. I’m a bit passionate about this because there is this thing about carry guns that forum monkeys will try to sell people:  carry guns have to be small.  That’s bullshit, IMO, and seems to be more of an attempt to limit a gun owner.

Lastly, I’ll give you a history of my involvement with firearms.

I’m a 10-year military veteran.  Up until 2014, I’d never owned a firearm, but in my 10 years of active duty, I’ve slept with guns, took a dump with guns, practiced almost monthly with guns, deployed to hostile environment with guns, and performed guard duty with live rounds, with a mag in the gun but no round chambered.  And when I went to the range, I actually coached on basic marksmanship and sight zero adjustments.  I’ve fired M16A2s almost exclusively, but also attended an OPFOR range while assigned to the 2nd ID G2 section…we fired captured Soviet-type weapons and ammunition.  I’ve fired claymores, as well, at an actual claymore range at Fort Bragg.  I’ve also handled both plastic explosives, blasting caps, low yield TNT and high explosives (I had to know how to emergency dispose of classified machinery).  This is just everyday stuff to most veterans (minus the explosives bit, probably), but with all that being said, I’m still new to handguns, but keep in mind that a lot (but not all) of my rifle experience carries over to handguns.  And really, a lot of this is common sense.  I’ve 10 years of extremely valuable firearms experience and have never owned a handgun…why is it that I’m comfortable with my P220?  Because in the basic sense, a gun is a gun.  I already knew how to clear a semi-automatic handgun because it’s basically the same as clearing an M16:  drop the mag, pull and/or lock back the charging handle, look inside the chamber for any rounds, if there are no rounds, release the slide and place on safe (if applicable, because many Sigs don’t have manual safes).  As well, in Virginia (where I’m from), military veterans can apply for their concealed carry license with nothing more than their DD214s as a prerequisite form (with an honorable discharge).

Stay tuned, as I’ll be gradually beefing up this page with my weapons and ownership experiences.