Categories
Bul Armory SAS II Ultralight Weapon-Mounted Light

I Lost My Weapon-Mounted Light

I recently started using a weapon-mounted light (WML), carrying it on my Bul Armory SAS II Ultralight. I lost it when I took the gun to the range for practice – it fell off while I was shooting. I did not become aware that the light was missing until almost 2 weeks later!

There are some things to remember and prepare for when usually WMLs.

WMLs usually require a holster that keys off the light. If you lose the light, you’ll be unable to properly carry the gun if you only have a holster that requires a WML. I didn’t notice that the light was gone – it still fit into the holster but the fit wasn’t proper. I’ve no idea why I didn’t notice it intially. The only reason I noticed that the light was gone was because I removed the gun from the holster to check the light and it wasn’t on the gun.

If you lose a light, you should be prepared by either having a backup light or a holster that will allow you use without a WML. In my case, I just pivoted back to using the Tenicor Certum 3, but I was irritated that I’d lost a $100 light and irritated that I had to go back to the Certum, as I’d just started using the QVO Tactical holster.

Also, a good thing to do would be to check your lane/booth before leaving, to ensure that you’re not leaving equipment. I always check and I did check that night but didn’t see the light in the booth (it fell forward of the firing line and was lying on the ground), so a good check would be to ensure that your light is still mounted to your gun before you leave the range.

I contacted my range and shared with them that I’d lost the light at the range and provided them the lane I was using, the make and model of the light, and the date/time I was at the range. I also posted about losing the light on Reddit. Someone replied to the Reddit post stating that they saw the light immediately after I’d left the range (it fell forward of the firing line and was lying on the ground). He said he reported it to the range officer and asked the range officer to retrieve it. He told me to contact the range and ask for Andy.

I contacted the range via their web page and they looked at the camera footage and stated that they couldn’t see the light on my gun and didn’t even know if they were looking at the correct lane. I told them what I was wearing and what I was shooting and told them that the light may’ve come off the gun very soon after shooting it and to not rely on the footage. I told them that I’d checked the lane before leaving and that the light almost certainly fell past the firing line. I also told him that another person on Reddit said that he’d seen the light and had reported it to the RSO and that he’d watched the RSO retrieve it. It was actually a bit surprising that I had to tell them that to get them to become more engaged – it was almost as if they weren’t convinced I’d lost the light at their facility.

The next day, I got a call (I was away from the phone, so a voicemail was left). A supervisor said they’ve my light but that the RSO (Andy) had forgotten it in his range pouch and taken it home. Andy is a college student and was working minimal hours, so he wouldn’t be available to work until 3 days later. He told me to come on on Friday after 3 PM and the light would be available for me to pick up.

I went and picked it up yesterday. They said they’d a few lights (this most be a common issue) and asked for the make/model. They gave me what looked like my light but they must’ve had several TLR-7X lights and I think I received the wrong one. Why do I think that? Because, when I got home and was trying to install the light and it wouldn’t fit. With mine, I didn’t have to change the key – the light fit on the gun with the key that was already on the light. When I got this particular light home, it would not fit on the gun at all. The key was the same (the Universal 1 key) but I think the TLR-7s are packaged with different keys and are built for particular gun types/models. Since I had other keys, I tried those and was able to use a 1913 key that fit the gun (I forgot which one I used).

How do you keep your Streamlight TLR-7 from coming off the gun? They come with e-clips. After selecting a key and installing it, you install the e-clip to the retention screw, which keeps the screw from loosening. I’ve heard many guys on Reddit stating that they don’t use the e-clip. That’s a bad decision, as you’re only supposed to hand-tighten the retention screw. The light comes with two e-clips and you’ve to install it once you’ve chosen the correct key to use. I didn’t install the e-clip because I was unaware that it was 100% necessary. The e-clip is on now, though.

I’m not sure if I should’ve just went back to the range and told them that even though they gave me a TLR-7X, they gave me someone else’s. It may’ve taken weeks and I may not have ever gotten the correct light, so I settled for this.

UPDATE:

I’ve pieced together what happened with my light.

When it was returned to me, it wouldn’t fit on my gun. It fit on my gun before I lost it. I had to change out the key before the light would fit on my gun again. This means someone changed it.

As well, I’d never enabled strobing on the light – this is something that you can’t do by accident, as it requires pressing the “on” button consecutively, ten times…that enables strobing. Someone else had to have done that.

Initially, I’d thought that I had the wrong light, which accounted for while the light wouldn’t fit my gun and why strobing was enabled. I found a picture that had captured the light’s serial number. I compared that with the serial number on the light after it was returned to me. The serial numbers match, meaning the light is the one I had before I lost it. This means that whoever had my light while it was lost was actively using it (ie, it didn’t stay lost, but was taken/used after it was found by someone else).

The RSO that retrieved the light may’ve been using it, and that is sad.

By nature, I always am overly trusting. I mean, I learned it this time, and didn’t do anything wrong and didn’t do anything that suggested I was naive. I still feel wronged, though. I grew up less-than-rich, meaning, while I wasn’t poor, I wasn’t far from it. I know the value of money. I make great money now but no matter how much I make, it’s hard-earned. Gun lights aren’t exactly cheap – mine wasn’t top-of-the-line, but it wasn’t cheap either. I’m not a person to just blow off losing a $100 bill and that light was more than $100. I got it back, yes, but not before someone attempted to use and alter it. That’s fucking sad.

I think I’ve to learn to be less trusting.

I talk about all of this in my most recent video:

Categories
1911 2011 Bul Armory holster SAS II Ultralight

I’ve Ordered Several Mastermind Tactics Products

Today, I was looking at a holster that I bought that does not carry well. The specific holster is the Priority 1 PCHS for the Bul Armory SAS II UL. The PCHS holster is designed for a short-barrelled handgun for appendix carry (inside the waistband) and has a habit of pushing out the gun’s grip. I want the grip to be tucked in.

Now, this issue is lessened if you buy a holster that is longer than the gun. For example, I bought the Tenicor Certum for 4.25″ 1911s and I use it with my short-barrelled 1911s. Since the holster is longer, it helps to stabilize and better position the holster – it pertains to the keel method and also applies to wedges and other contraptions that help with positioning the holster and gun.

With the Certum holster, I use a custom wedge that I made from a yoga bar and velcro’d the wedge to the holster. The wedge gives me some extra positioning and pushes the gun’s grip into my body. It’s not perfect but works well enough.

With the PCHS holster, I didn’t use a custom wedge, but received a PHLster holster wedge kit for Christmas present from my sister. I’ve been trying to use those wedges with the PCHS holster but it’s not working well.

Since I’ve been having issues with wedges, I decided to just buy several wedges from Mastermind Tactics.

I ordered the following items:

I ordered the packs because I’ve several holsters and I can benefit from having several types of wedges and pillows to customize the fit/ride of my holsters. Plus, I can get rid of the custom wedge if I find that one of the above solutions works.

I’ll post updates once I’ve begun to experiment with the delivered products.

Categories
1911 AIWB appendix holster

The Tenicor Certum 3 has arrived!

I may need to fine-tune the position placement, but the Certum 3 appears to wear better than the Velo 4. I’m not sure if that’s a fair thing to say, because the Certum does offer a lot more adjustment than the Velo. I have it canted maybe 10-15 degrees to the left, and have it at the 1 o’clock position on the right side, carrying appendix of course. I’m not able to cant the Velo 4 in that fashion (it may be possibe if one clip is removed).

I also installed the largest camming bar, which helps a ton. Tenicor should rework the Velo 4 to have the same camming bar (and not the integrated camming bar).

There’s still a hot spot with this holster, though. The muzzle of the shell is pressing down into my pelvis badly. I’ll be cutting another yoga wedge (a small one, just to negate the pressure of the shell’s muzzle).

I’m already quite happy with this holster. It appears to be more stealthy, as I’m just casually wearing while at home and it’s not as noticeable as when I’m wearing the 1911 in the Velo 4.

I’ll maybe capture some video footage to show how well both work with my 1911 and body type.

Categories
appendix holster

I’ve Bought A Tenicor Certum Kydex Holster ! It’s OTW !

Yeah, I’ve a Tenicor Certum v3 on the way.

The Velo v4 isn’t agreeing with me. I’ve messed with it maybe 3 weeks, moving it around each time and waiting a few days to acclimatize to it. I’ve even tried adding additional wedging to it (for me, I need a bit more wedging but not necessarily as much peakiness – the integrated wedge feels too “sharp”. I used a piece of sculpted yoga bar as a wedge. It’s

I’m a bit greedy and don’t want to return the Velo just yet, but still want to experiment with the Certum, so I ordered it. I can always resell the Velo later on, if needed.

I’m certain I’ll have to add a wedge to the Certum as well, but at least it will be easier to add a wedge than with the Velo. And, if need be, I can always use the Certum as a base for the Phlster Enigma, if/when I decide to go that route.

Categories
1911 appendix holster

Daughter Bought Me A Tenicor Velo 4 Holster !

So, my wish was granted. My daughter bought me a Tenicor Velo 4 for Christmas and presented it to me maybe 4-5 days before Christmas!

I tried carrying with with it.

It will NOT carry center-appendix, as it appears to be built more with 1-2 o’clock in mind (I’ve the right-side holster). The wedge is oddly placed for my body type (I’m 5’7″, 185 lb, medium build with 29-30″ in-step, a tad thick in the waist @ 32 inches). Keep in mind that I’m trying to carry the RIA MS 1911, which is 4.25″ in barrel length and has a full-sized grip.

The wedge is problematic, as it doesn’t sit well in the leg/pelvic crease and is peaky, so creates a hot spot for me. I need a bit more wedge but need it wider and not peaky.

The holster also has minimal ride adjustability and no cant adjustability.

At this point, the Crossbreed The Reckoning holster I bought carries a LOT better (I’ve customized it a bit).

I almost told my daughter to return it and to get the Certum instead, but wanted to give the Velo 4 a fair chance first.

I decided to try carrying it a bit more, moving it around to try to find a sweet spot (which I did for the Crossbreed as well – I carry that centerline appendix).

After a few days of trying, I still couldn’t carry it well.

I decided to try a custom wedge via the yoga block method. I bought a yoga foam block and cut out a decent sized rectangle. I then began whittling the rectangle into a wedge, hollowing out a pit for the holster’s integrated wedge to sit. The most difficult part of this process was hollowing out an area to fit the integrate wedge, as I had to ensure it was smoothed out in that area so that the velcro (loop side) would stick in that area. Another difficult part was sticking velcro to the holster itself.

It ended up being a large foam block of wedge to velcro to the holster. Initially, after test-carrying, it was too big, so I removed it from the holster and whittled it down to a smaller shape.

I carried it today during a 5 hour drive.

It wore well the whole drive. There were several instances of me getting in/out of the car, walking around, visiting the men’s room, and pumping gas.

It wears a LOT better than without the foam.

I will probably still try the Certum as another great appendix option (that one should carry just as well and also offer far more adjustability in ride height and cant, while also giving the option of strong side carry.

Pics are here.

Oh, and my wife bought me 200 rounds of 9mm Inceptor ARX self defense ammo – my mother bought me 50 rounds of the same ammo, too!

Note: I don’t entertain the notion that Inceptor ARX is gimmick ammo. I’m aware that some folks think that this ammo performs poorly in gel tests, but I’ve also seen great gel test results. There’s also this.

I’d been looking for 9mm Inceptor ARX for a while but could never find it in stock. I found a stash at Midway, and it was on sale too – I added it to my Elfster Christmas wishlist. Between my wife and my mother, they must’ve bought the whole supply I found, because Midway is now out of stock.

Categories
1911 Commander holster

New Holster On The Way!

I ordered a kydex holster with a leather backer today, as I wanted to take advantage of Black Friday sales. I didn’t want one of those small kydex-only holsters (I have one for my Grand Power and it’s uncomfortable to use).

I’m specifically looking for an IWB holster that’ll fit Commander-sized 1911s. As well, I’m looking at appendix holsters (AIWB).

Personally, I want a Tenicor Velo4 but Tenicor is not participating in Black Friday sales, although they do have sales of blemished holsters, but do not currently have any for Commander-sized 1911s. I’ve also added the Tenicor Velo4 to my Elfster wish list (that’s how my family and extended family tracks gift purchases), so there’s a chance that someone will buy it for me for Christmas.

I’m also interested in Tenicor’s Certum holster (the Velo and Certum are not the same holster – the Certum has better adjustability and can be used as both IWB and AIWB, but the Velo is dedicated to appendix carry).

I’d also been looking at the Vedder LightTuck, but their sales folks aren’t helpful enough to help me commit to the purchase – I needed to know if the holster fits the Rock Island Armory Rock Ultra MS, and they said it wouldn’t but when I researched with Google, I found that there are a decent amount of folks using the LightTuck with RIA 1911s. Also, the LightTuck is maybe $5 less than but also less refined than Tenicor holsters. Due to those details and the fact that the Vedder sales folks were unhelpful, I decided to give my hard-earned money to a business other than Vedder.

While I wait to see if someone buys me the Tenicor for Christmas, I decided to buy Crossbreed’s The Reckoning holster and opted for the claw. I didn’t want to wait another 30 days, especially since I’m not sure if anyone is going to buy me the Tenicor.

I almost bought the The Reckoning holster system (which includes a mag holster side car), but was trying to keep costs down – I can always buy the side car separately. This specific holster can also be converted for strong side carry (in case I don’t like AIWB).

The holster was 25% off for Black Friday sales (was a bit over $50, excluding tax and shipping).

This will be my first time using an AIWB holster. I may find that I don’t like the holster, but it’s reported to be very comfortable. If I find that I don’t like it, I’ve the option of returning it. We’ll see.