Tag: double-stacked

Categories
1911 2011 9mm AF1911-S15 Alpha Foxtrot Bul Armory double-stack double-stacked safety

SAS II Was Returned To Bul Armory

I’ve started my Christmas 2023 vacation this week. Several things are on my agenda as far as firearms are concerned.

  1. I’ve to send my SAS II UL back to Bul Armory for them to fix an issue that I couldn’t resolve. The problem is that I can fire the gun without disengaging the grip safety. I did replace the trigger shoe with a flat shoe. That replacement required me to remove the over-travel screw, but I adjusted it properly. At least, I think I did. I’ve done the same to my other 1911s and none of the other guns are experiencing the issue. I don’t typically test to see if my 1911s will fire with the grip safety disengaged, so I don’t know why I tried it this time. BA sent me a shipping label so that I can send it back to them. I’ve boxed up the gun and will ship it out tomorrow. I’ve removed the optic and reinstalled the rear irons. I also included an empty mag (they asked for it to be sent with the gun). I’ve no idea how long they’ll have the gun and customer support is hit/miss as far as being good is concerned.
  2. I haven’t shot my Tisas Duty in a while. Someone asked in r/1911 about extended reviews of the gun. I stated that no one has been posting about the gun, other than after one range visit of shooting. So, tomorrow, I plan to visit the range with the Tisas. I went to Cabelas and found some somewhat cheap ammo. I bought three boxes of 50 rounds each. The whole reason I stopped shooting it was because 45ACP was expensive at the time. I’ll bring an extra box from home (I’ve a box of Herters JHP too). I’ve some Underwood +P too, but that’s expensive, and after a while, it actually hurts to shoot it. The jarring is pretty ruthless, at 1200 FPS. The plan is to try to shoot all 200 rounds. I’ve to remember to bring all the different mags I have.

While the SAS II UL is out for repair, I’m carrying the Alpha Foxtrot S15. I’d checked to see if the S15 would fit in my Tenicor holster (when I’d first bough the gun), but I’d never actually worn the holster with that gun. It EASILY carries. While I knew the grip was thin, it’s easy to hide – much easier than the SAS II UL’s grip. What I’m not used to is it’s heft. It’s heavier – not by a lot, but it’s noticeable.

As soon as the SAS II UL gets returned to me, I probably should ask Alpha Foxtrot to look at that gun, as the ramp frame insert sometimes moves. Once that has been fixed, I’m probably going to find a reputable place that’ll make the gun optics-ready.

I’ll update you all on the status of the Bul Armory once it is returned to me.

Categories
10mm 1911A1 1911A2 22TCM FS HC Rock Island Armory Rock Ultra

Time for A 10mm Range Visit

I picked up the RIA Rock Ultra FS HC 10mm this morning before work (5 min wait to get background check results – I’m squeaky clean).

As usual, the handgun was covered in cosmoline and was in a plastic bag.  It came with one mag (as expected) and a manual.  The envelope with the spent cases showed an inspection date of 12/18/2020, meaning the gun is new.

The recoil spring is Popeye strong…you probably need to open a can of spinach to rack the slide.  I’m not joking…it’s strong and probably needs to be.  One of the things I struggle with when handling the gun is racking the slide.  I wish the slide had more aggressive serrations, because I sometimes can’t get a good enough grip to properly rack the gun.

I field-stripped the gun to clean off the preservative (it is not lube).  The machining is really nice.  This gun has a bull barrel, too…there’s no bushing, so you need to use a tool or paper clip to field strip the gun.  Now, to break down the recoil spring assembly (which consists of  the recoil rod, spring, and reverse plug), you’re not going to be able to do it your fingers.  The spring is far too strong.  Use the slide to help with that process.

The thumb safety needs to be tightened…it’s a bit loose (all of my Filipino 1911s were).

Speaking of the trigger, it is not light but also not heavy: 4 lb 4 oz on an average of 5 trigger pulls.

I changed the fiber filament of the front sight.  I had trouble removing it.  It appears as if someone (maybe) used an adhesive or even Locktite to secure it.  I replaced it with a TruGlo filament.

I took the gun to the range this evening, along with my RIA 22TCM.  The Rock Ultra manages recoil very well…I had no issues controlling the handgun, although I was using 180-gr FMJ range ammo (S&B and Ammo Inc).  It shoots far better than my Glock 22, but it has a lot more weight than the G22, as well.  The 10mm was launching spent casings against the side of the booth and I’ve no doubt it’ll throw brass 20+ feet.

The S&B ammo is NICE ammo!  It’s clean and very accurate.  I was shooting from 7 yards.  I always do…no need to shoot further than that, IMO, and it’s a good distance to benchmark a handgun.  I shot 25 rounds of S&B, noting that my grouping was relatively tight.  I then loaded a mag of the Ammo Inc.  That ammo sucks!!  I was all over the place and at first thought it was me.  No.  The ammo is very inconsistent and was throwing ammo all over the target.  I will not be buying anymore of that ammo…well, I might, if the ammo prices keep climbing.  Bad ammo is better than no ammo, I guess.

As always, when shooting 1911s, I always shoot low left of center.  The groups may be tight, but I still shoot low left.  I think I’ve determined what I’m doing wrong.  When the gun is in my hand and I’m aiming down the sights, I’m almost 100% certain that the gun isn’t aiming straight down-range.  I must be aiming left.  Also, I caught myself (twice) flinching when pulling the trigger.  The flinching is making me pull low left – I actually saw it when reviewing my GoPro range footage (which is why I use the camera when shooting).  So, I’ve to work on getting better at shooting 1911s.  I did eventually walk the rounds to bulls-eye with the 22TCM 1911, though (I shot 50 rounds).

I will return to the range soon, but will probably bring the AK pistols next go around.  I may bring the Rock Ultra as well, if I can find more 10mm ammo.

Categories
10mm 1911 1911A2 2011 double-stack double-stacked HC Hinterland Outfitters MS RIA Rock Island Armory Rock Ultra

10mm 1911s

I’ve a 10mm 1911 on the way here.  It’ll be my first full-sized 1911 and my first 10mm.  I purchased a RIA Rock Ultra FS HC chambered in 10mm.  I’d been looking at Glock 20s and 29s but didn’t want the shock of recoil to bug me.  While the Glocks weigh around 2 lb empty, the RIA 10mm weighs around 2.5 lb and is all steel.  I won’t be carrying this gun but I do want to experience 10mm without regret.  As well, I had a difficult time finding a Glock 20 and 29 in stock.

What’s cool about this 10mm is that it is double-stacked (what some folks call the M1911A2; it’s not a true 2011, as the 2011 is modular in nature while the M1911A2 is not).  It is a full-featured handgun.  What’s not cool is that the handgun only comes with one magazine.

It’ll probably be 2 weeks before it ships to my FFL.  The FFL will probably take another week to call me to pick it up.  In 3 weeks time, expect a table top review.

I’m about to order another magazine and will begin looking for ammo.  I hope to have both the mag and ammo will be here before the gun arrives.

This is what I ordered (from Hinterland Outfitters):

UPDATE (2/15/2021) – I just got notice that the firearm shipped on 2/12…headed to my FFL dealer now…may be a while though, since there’s severe weather in the mid-West right now.

Categories
.380ACP 15-round Bersa DA/SA Delta Three Outfitters double-stack double-stacked Plus PPK/S Thunder Walther

Another Gun Is On The Way!

UPDATE – this gun was NOT in stock like it appeared to be.  After 3 days of waiting to see movement on the order, I contacted the store and asked if they actually had the gun in stock.  They did not and said all their suppliers were having issues getting this particular handgun, so I told them to cancel the order, since it’s very apparent that there’s a stocking issue with this gun.  Argentina is experiencing significant economic difficulties, from what I understand.   This could be the cause of the nationwide backorder.

I bought another gun.  This is a bit different.  It’s a .380ACP handgun.  It is small in stature.  It is also small but double-stacked and will hold 15 rounds.  It is a double action / single action gun and also has a decocker/safety.  It is a non-U.S.-made gun.

What is it?

A Bersa Thunder Plus.

There are several variations of this particular model of gun:

  • Thunder (base model)
  • Thunder Combat (lower profile slide with wide serrations, rounded trigger guard, smaller profile beaver tail, ergonomic rubber grip surface)
  • Thunder Plus (enhanced capacity)
  • Thunder Concealed Carry (small beavertail and unique frame grip)

There are also different caliber versions:  .22 caliber and .380ACP

There are different paint and color schemes, as well as variants that have color-coded controls (nickel and gold, for example).

The gun looks somewhat similar to the Walther PPK, and shares the PPK’s barrel layout.

One thing that I’ll immediately remove once I have it is the magazine disconnect.  I do NOT need that abomination.  The gun also has an integrated lock (which I’ll never use).  I do need to order an extra magazine, as the gun is delivered with one magazine only.

I had a choice between nickel or black.  I actually wanted a Plus Combat (new for this year) but most places aren’t carrying them yet.  In fact, when looking for the Plus, most places online were out of stock.  And when I say most, I mean like 95% of the stores I checked.  I don’t even know if the place I ordered from actually has them in stock…I order went through without verification (the other places I checked wouldn’t let you order if they were out of stock or back-ordered).  I almost bought the nickel version, because I think it’s rarer, but it was $397…that’s a chunk of change for a Bersa Thunder, as the MSRP is like $420.  I got the black version for $379 from Delta Three Outfitters, which is also where the nickel Plus is currently stocked.

Why this gun?  Because it is cheaper than the Walther by a long shot, shoots just as well as the Walther, and carries double the ammo.  It’s reliability is great and has a lifetime warranty for original owners (not so with used Thunders, which is why I went ahead and bought it new… plus, I couldn’t find new ones…I know for a fact a used one will be difficult to find locally).  I like small-statured guns and wanted something I could shoot with my kids.  Also, because of it’s fixed barrel, it is very accurate.

Depending on how much I like this handgun, I may eventually get one or two single-stacked version.

Some people can’t stand the .380 round, though.  I’ve never shot it, but people have been killed with far less.  Shot placement is key, as I always say.  And with 15 rounds to get on target, I highly doubt someone will walk away without a scratch.  Plus, if I really wanted power, I can always look for +P .380 ammo…or, as a last resort, carry with FMJ, which I hear is what a lot of people are doing since .380ACP doesn’t appear to penetrate as well as 9mm (it has a smaller charge unless the round is hot).