Tag: HS507K-X2 ACSS Vulcan

Categories
Canik Canik TP9SA Holosun range visit TP9 Elite Subcompact

Canik Day Was Decent Fun

This is a follow up to the last post.

I had planned a lot for a one-hour range session – maybe a bit too much.

I ended up not shooting the S15 since I forgot to bring extra mags. I didn’t want to have to empty my carry mag and use one mag to shoot that gun, so I opted to not shoot it. It wasn’t a huge deal, since I’ve shot well over 1000 rounds through that gun — I’m not saying that that’s a huge amount but that amount certainly enables me to shoot the gun well enough.

I also opted to not use the Sig OHD app, as I didn’t want to mess with configuring the phone and tripod, as well as having to use the special targets (the printed targets are a turn-off for me, too). I do need to test the app and start using it, as it’s not cheap to subscribe to ($10/month).

I ended up shooting the two Caniks, starting with the TP9SA first. I shot 72 rounds from it, shooting it for roughly 30 minutes. I wanted to spend the time to learn the trigger and how to control this gun. It is full-sized but has a very light trigger and for some reason, I have issues shooting it accurately at 10+ yards. I did better this go-around than I did the prior range trip. If I shoot slowly, I can group the rounds somewhat tightly. As I speed it up, I lose all sorts of control, having pretty bad flyers.

At the half-way point of the range session, I swapped out the TP9SA for the TP9 Elite Subcompact. I had to zero the optic and was going the wrong direction in zeroing for a bit. Once I got it dialed in, I didn’t have a lot of time left. The optic worked well with this gun and I was also able to test out the irons through the optic, which I used o nail a bullseye at 10 yards. They barely cowitness (they cowitness like my SAS II UL does with the 507K, which is, barely). The gun is still difficult to control because it’s small and doesn’t offer a lot of grip support. It feels like it has a lot of muzzle flip, which is odd because my 1911s are roughly the same size and they don’t have nearly the same amount of flip. The Elite SC is far more top-heavy than the 1911s, though, and it’s also using a polymer lower. I shoot it a bit better than I did in past range visits, but it’s not really a fun gun to shoot, IMO. Well, it’s not bad, but is probably the least fun gun to shoot of my collection.

I’ll update this post with pics of the targets tomorrow.

Categories
Bul Armory Optic range report SAS II Ultralight video

Four Week Review of the Bul Armory SAS II UL

This is just a video-captured 20 minute summary of my experiences with the SAS II UL.

Categories
1911 2011 Bul Armory handguns range visit SAS II Ultralight

SAS II UL Optics Adjustment Issues – The Wedge Was Not Needed!

My range notes for today’s range visit:

This is the first time I’ve tried a range other than Elite. Elite closed last weekend, so today I visited XCal in Ashburn (30 min drive – 30 miles).

Shot 48 rounds of Norma 115-grain FMJ. There were no fails.

I also shot 64 rounds of Fiocchi 115-gr FMJ. There were no fails.

Total rounds this session was 112 rounds of FMJ. There were no fails.

I spent a majority of the 1-hour session adjusting my new optic (Holosun HS507K-X2 ACSS). It was initially frustrating because I couldn’t hit point of aim at all. I kept adjusting the sight and was able to get proper windage but couldn’t get the proper elevation…no matter how much I tried, I couldn’t get the dot lower than 6-8″ above the bulls-eys when shooting at 10 yards.

I finally stopped and decided to remove the optic wedge I’d installed (was supposed to fix an issue with the SAS II UL having elevation issues when an optic is mounted). Once I removed the wedge, I reinstalled the optic and was immediately hitting the bulls-eye. It still needs to be fine-tuned, but I’m quite happy with the functionality of the optic and that I solved the elevation issue!

I bought a crapload of ammo, but only got to shoot 112 rounds, since I was attempting to adjust the optic’s point of aim and since I had the issue with elevation.

I wish I’d shot a bit more to break the 500 round count.

I’ll attempt to visit again next week. I’m probably going to apply for membership before then.

I almost decided to put the irons back on tonight, at the range. The only thing that stopped me was that I’d forgotten to bring the irons with me. That forced me to bird-dog the issue – I didn’t need that optic wedge I’d installed and I shouldn’t have immediately installed it. That’s what I get for believing an internet source – bottom line is, don’t believe everything you read on the internet! Trust but verify. If I’d have installed just the optic and not the optic wedge, I’d have not had an issue at all.

Before removing the optic wedge

After removing the optic wedge
Categories
mags RDS trigger

First RDS on the Way, Plus Additional Mags

This weekend, I decided that I wanted more than just two mag for the SAS II, so I ordered two more 16-round mags.

Since I was already ordering something from the Bul Armory USA site, I also ordered a flat trigger shoe in silver.

I have a lot more JHP ammo, as well. I went to Cabelas and bought several boxes of JHP and FMJ 9mm ammo, plus, I’d forgotten that I’d done the same thing maybe two months ago, so I’ve probably 300 rounds of a mix of FMJ and SD ammo.

Today, I ended up buying my first red dot sight (RDS). I bought the Holosun HS507K-X2 ACSS Vulcan, in red, from OpticsPlanet. I had a difficult time chosing between that an the Holosun EPS Carry, but the EPS Carry was expensive (like $400 for the MRS variant). I wanted the ACSS because I’m new to red dots and the ACSS will help with sight positioning. I can buy the EPS Carry next year. As well, the HS507K-X2 ACSS will also fit on my Canik TP9 Elite SC if I decide to go back to carrying that gun.