Tag: range visit

Categories
9mm AF1911-S15 Alpha Foxtrot Grand Power limp-wrist P11

Summary of Range Session – 9/8/2023

I went to the range tonight because I wanted to work off some steam (been busy with work and have been stressing).

I’d been thinking about my Grand Power and recently had someone reach out to me on YouTube. She said that she has the P11 and that she’d been having the exact same issue (fails to return to battery, or FRTB), but that her husband didn’t have the issues when shooting it. She hinted that it may’ve been limp wristing that caused it.

I did a bit of research and it seems that limp wristing can cause FRTBs.

I never realized that I could’ve been limp wristing the gun. It is rather slick, with no significant texturing on the grip.

I decided to begin taking it to the range to see if I can shoot it without experiencing the FRTBs. I shot 50 (well, 48) rounds of Koenig 110-gr JHP Match through it tonight and I didn’t have any failures. Note that the gun is configured a bit differently since I last shot it — I’m using a small Hogue rubber grooved slip-on grip, which helped with getting control of the handgun. I was ensuring I had a strong grip on the gun. I’ll continue to bring it to the range, shooting 50-100 rounds from it when I can, and trying to practice good grip technique so that I’m accurate as well as not limp-wristing.

I also shot 155 rounds from the Alpha Foxtrot S15 1911. The ammo of the night for that gun was Herters Target 115-gr FMJ with a splash of Fiocchi 115-gr FMJ. Whereas I didn’t have any issues last range visit, I had 8 FTEs this range visit. I shot the same ammo last visit, as well.

The issues could be (possible solutions are below, in italics):

Bad magazine – I shot with all six mags and only one mag generated failures, so I kept shooting with it to see if I was limp-wristing and causing the failures. I shot many rounds through that mag tonight and there was only one time where I got thorugh a mag without failures. I marked the mag and will put it aside. The plan is to use the other mags next range visit – if the failures stop, then I’ll know that the mag is the problem.

Bad box of ammo – I bought 200 rounds of Herters (2 x 100-round boxes). I got through one box with only two fails to extract. The other box had five FTEs. The Fiocchi had one failure – not only did it the spent case not extract, but it was still fully in the chamber, and the slide did not lock back (it was the last round of the mag). Also, I noticed that the slide would sometimes seem to be moving a bit slower than normal after a round is fired, which is usually indicative of inconsistent amounts of powder within the case. As well, some of the ammo looked funky where the case crimps onto the projectile, as if the ammo had possible QC issues. I’ll bring some good JHP with me next range visit, to see if the issues still occur with good ammo.

Limp-wristing – I won’t count this out, since the FTEs started occurring mid session of my range visit. I tend to fatigue myself as I practice (this is normal). Next range visit, I’ll test the S15 (and the other 5 mags that didn’t have issues) before shooting any other guns.

I did have fun shooting the Grand Power again. I was accurate with it. I shot it once at 10 yards but the spread was wider than when I shoot the S15 at that range, which I initially thought was odd until I realized that the S15 has far better grip texturing. I ended up sticking with shooting at 7 yards.

The S15 is accurate AF! I spent a large amount of time shooting at 10 yards and was accurate. Not only that, there were times where I was shooting pretty fast and my groups were tight as I shot further out. And that was with irons. This gun is uncanny, but it’s really because of the front checkering on the grip. It’s going to seriously spoil me. I’m already thinking about selling all my other 1911s so that I can focus on 1911s and 2011s that have front checkering. Yes, I can get checkering added to my existing 1911s, but some gunsmiths won’t touch non-US guns and all guns that get checkering will need to be repainted/refinished.

I also now have just under 500 rounds through the S15. I’m slowly accumulating the round count on this gun. I’ve just under 1600 rounds through the GP P11.

Categories
Bul Armory Optic range report SAS II Ultralight video

Four Week Review of the Bul Armory SAS II UL

This is just a video-captured 20 minute summary of my experiences with the SAS II UL.

Categories
1911 2011 Bul Armory handguns range visit SAS II Ultralight

SAS II UL Optics Adjustment Issues – The Wedge Was Not Needed!

My range notes for today’s range visit:

This is the first time I’ve tried a range other than Elite. Elite closed last weekend, so today I visited XCal in Ashburn (30 min drive – 30 miles).

Shot 48 rounds of Norma 115-grain FMJ. There were no fails.

I also shot 64 rounds of Fiocchi 115-gr FMJ. There were no fails.

Total rounds this session was 112 rounds of FMJ. There were no fails.

I spent a majority of the 1-hour session adjusting my new optic (Holosun HS507K-X2 ACSS). It was initially frustrating because I couldn’t hit point of aim at all. I kept adjusting the sight and was able to get proper windage but couldn’t get the proper elevation…no matter how much I tried, I couldn’t get the dot lower than 6-8″ above the bulls-eys when shooting at 10 yards.

I finally stopped and decided to remove the optic wedge I’d installed (was supposed to fix an issue with the SAS II UL having elevation issues when an optic is mounted). Once I removed the wedge, I reinstalled the optic and was immediately hitting the bulls-eye. It still needs to be fine-tuned, but I’m quite happy with the functionality of the optic and that I solved the elevation issue!

I bought a crapload of ammo, but only got to shoot 112 rounds, since I was attempting to adjust the optic’s point of aim and since I had the issue with elevation.

I wish I’d shot a bit more to break the 500 round count.

I’ll attempt to visit again next week. I’m probably going to apply for membership before then.

I almost decided to put the irons back on tonight, at the range. The only thing that stopped me was that I’d forgotten to bring the irons with me. That forced me to bird-dog the issue – I didn’t need that optic wedge I’d installed and I shouldn’t have immediately installed it. That’s what I get for believing an internet source – bottom line is, don’t believe everything you read on the internet! Trust but verify. If I’d have installed just the optic and not the optic wedge, I’d have not had an issue at all.

Before removing the optic wedge

After removing the optic wedge
Categories
ammo Bul Armory defensive ammo range report range visit SAS II Ultralight

Summary of the SAS II UL’s 2nd Range Visit

I went to the range yesterday and shot approximately 160 rounds of ammo. Half of it was FMJ and the other half was straight-up SD ammo (none of the cheap stuff).

Some quick observations:

  • I cleaned the firearm for the first time today (a day after the 2nd range visit). It was filthy. I could see preservative oil in the upper reaches of the slide (looked like rust but I know it wasn’t – tell-tale sign of preservative oil). I didn’t deep-clean the gun – I only field-stripped the gun, but I did remove the firing pin and clean it (I didn’t have any pipe cleaners, so I didn’t clean inside the channel). I also cleaned the extractor claw (did not remove the extractor, though). The claw was nasty. The barrel was nasty and had some crud in the chamber that took some time cleaning.
  • I took the opportunity to also take apart the two mags that came with the gun. I cleaned and oiled them (light coat of oil).
  • I noticed that the rear sight was loose. I’ll need to remove the rear sight, clean the threads, and then use blue thread locker to secure it, but for now, I just tightened the rear sight screws – I’ve an optic on the way here, and I’ll be removing the rear sight anyways.
  • I received two more OEM mags today, as well as a flat trigger shoe. I thought I could quickly install the new trigger shoe – nope…I need a 1.3mm allen wrench to remove the trigger shoe. That’s going to be a bitch to get off, too – it will take time, IF it’s not secured with threadlocker. If it is, it’ll take even more time.
  • I also received two optic shims (I only needed one but I wanted redundancy). The HS507K will require the shim, otherwise I won’t be able to adjust it properly (this is a known issue with the 507K and the SAS II UL).
  • The gun fired OK during the range visit. I shot the following ammo: Herter’s Defense in 115-gr JHP, Sig V-Crown Elite Defense 124-gr JHP, Koenig Competition 110-gr JHP, Remington Golden Saber 124-gr BJHP and 147-gr BJHP, and Hevi Duty 100-gr frangible flat-nosed ammo. I also brought some Fiocchi 115-gr FMJ ammo.
  • I had two fails to feed (FTF) with the Sig ammo, one of the FTFs being a double-feed. This ammo shot a tad bit high.
  • I had two FTFs with the Koenig ammo – same deal, one of the FTFs being a double-feed. As well, this ammo shot 2-3″ high! To hit the bullseye, I had to aim 2+ inches low.
  • I had no failures with the rest of the ammo, although the Hevi Duty frangible ammo shot high.

Basically, it seems that any light-for-caliber ammo that is shot from this gun will land high. That was my experience with Inceptor ARX (65-gr fluted tip) too.

So, we’ve shot a total of 336 rounds of ammo from the SAS II UL, thus far.

I still need to master the trigger of this gun. It’s a bit more difficult to shoot (and be precise) than my other 1911 9mm handguns, part of the issue being recoil management. I’ll get better as I spend time with the gun.

Categories
7.62 x 39 AK AK-47 AK-P Arsenal Canik PSA SAM7UF-85 TP9 Elite TP9 Elite Subcompact

AK Range Day!

Today’s range day was deemed AK range day!

I took out the Arsenal SAM7UF and PSA AK-P. The former is a milled rifle that I’ve owned 2-3 years but never shot until today. The latter is an AK pistol that I bought 3-4 years ago and have been shooting off and on.

Both are dreams to shoot. I’ve no range footage because I hate recording when shooting long guns (my mounting point doesn’t agree with the rifle shooting position).

I shot the SAM7UF first. I thought it would be hard on my shoulder but it was rather mild, especially considering that the folding stock’s makeup is usually something that folks complain about. It’s supposedly not easy to shoot, but the stock didn’t bother me (I’ve the rails covered with paracord).

I thought the recoil would bother my shoulder with that stock but much of the recoil never made it to my body. The milled rifle is heavy and the heft absorbed much of the recoil.

I shot out to 25 yards. I wasn’t hitting point of aim but I think it’s because the rifle may be zero’d to 100 yards. I need to study the method of zeroing AKs. When I do, I’ll revisit the range with the SAM7 and zero the gun (on the 25 yard range, since I’ll have a difficult time seeing further than that).

The gun has some blast, too. It seems it has more blast than my other long AK (a bastardized AK-63D from Classic Firearms). I shot 30 rounds before I switched to the PSA AK-P.

The PSA AK-P is a flamethrower but I already knew that. I didn’t feel like squinting trying to hit 25 yard targets so I moved the target closer, to half that distance.

I’ve a red dot sight for this firearm but I removed it when I last took it out, as I hated it. I’m decently accurate with the iron sights, so I shot 30 rounds at one of those target papers that have 5 targets on it. all but maybe 4-5 landed on paper (because the targets on the edge of the paper don’t leave much room for error and I was doing a lot of quasi double-tapping). The groupings were pretty tight for the rate of fire I used. I also shot while standing. A picture is below.

12 yards, standing w/ irons…

The gun bucks and throws fire. Additionally, it got HOT! I burned myself once and had to wrap it up in rags before I put it in it’s case so it wouldn’t melt the inside foam. Also, keep in mind that this is a pistol and the brace is HARD on a shoulder with the kick of an AK pistol. I also tend to pull the gun in really tight while gripping the mag. I’ll be bruised tomorrow.

Lastly, I always try to shoot my carry gun when I’m visiting the range, so I shot some defensive ammo from the Canik TP9 Elite SC. This ammo is something new to me, but I bought a batch of it from my range 2 nights ago, since it was on sale at 19.99 for a box of 50. The make and model is Federal 115-gr Hi-Shok JHP. I bought 250 rounds of it, not knowing if it was good or not but liking the sub-$20/box price. I later researched the ammo and found that the ammo is GOOD and that law enforcement uses it. I’d assumed that since the box was white and since the ammo wasn’t being sold in 20-round boxes, it was range ammo. It is not. So, tonight I bought 100 more rounds of it just to shoot with tonight. It shot well, without hiccups, and without feed or extraction issues. I may end up trying to buy it in bulk but my research shows that when looking for it online, the low price is 0.49/round, which is a bit high compared to what I found at my range. My range will carry it until it runs out and won’t let me buy in bulk anymore (the person that sold it to me apparently shouldn’t have let me buy so much without shooting – I bought it after my shooting session).

Right now, I’m right at 482 rounds shot through the TP9 ESC. Expect that number to go quickly as I continue to practice with it.

The AK-P currently has 370 rounds through it. I could shoot it more but for some reason, shooting that gun indoors gets old quickly (it has tremendous blast). I looked at the internals (trunion, bolt, and bolt carrier) and the parts aren’t beat up (this model is a GF3). Most AK snobs hate US-made AK, and think they’re sub-par. If I have any issues, it’ll be something like fire-pin issues, or something stuck in the firing pin channel (primer metal), or maybe a loose firing pin retaining pin (which probably won’t be an issue, as I’ve checked it and it is not loose at all). I will probably buy another firing pin, in case the OEM one breaks.

The SAM7UF only has 30 rounds through it but I’ll try to shoot it more, now that it’s no longer virgin.

Categories
1911 1911A1 45ACP 9mm American Classic Commander Metro Arms RIA Rock Island Armory

New YouTube Video – 1911 Range Day!

I tried a new format in this video, using my GoPro hat-clip. What I didnt’ account for was the volume isn’t crisp, as the hat-clip requires usage of the GoPro case, which is apparently covering the camera’s mic. 🙁

There were issues with the Metro Arms 1911. I’ve been suspecting as much the past 1-2 years, but my handgun experience is expanding and I’m confident to say that this handgun has issues with it’s sights. I’ll be looking into obtaining a new set of sights for this handgun (I wouldn’t mind having the sights that are on my RIA Tac Ultra installed on this handgun).

Also, I finally installed the 9mm barrel into my RIA Tac Ultra (I have always shot it with the 22TCM barrel installed). I shot 140 rounds of 9mm from the gun. The gun now has a total of 746 rounds through it. It’s my third most-fired handgun (the Grand Power P11 and Bersa Thunder Plus are 1st and 2nd).

There were some fails to feed when firing the Tac Ultra, but the feed issues only occurred with the OEM mags. I’ve Wilson Combat 9mm ETM mags, which didn’t have any feed issues. I also used the 38 Super mag that came with the Tac Ultra. I also used the 9mm mag that came with my RIA Rock Ultra. The latter two mag are the mags that had inconsistent issues. The feed issues were occurring mid-mag.

Lastly, I need to research who is the new US importer for Metro Arms. Eagle Imports was the importer, but they went out of business earlier this year.

Categories
9mm Canik Elite Shooting Sports range visit SP2022 TP9SA

A Range Report: Shooting The Canik TP9SA And Sig SP2022!

I took the TP9SA to the range this weekend.  It shot well!  I’m very impressed.

Some notes:

  1. This is the first striker-fired gun I’ve ever shot.
  2. I shot 108 rounds of Remington UMC 115-grain (megabox).
  3. I was shooting from a distance of 10 yards.
  4. There was one stovepipe that occurred when firing the first magazine.
  5. There was one failure to feed that occurred when firing the second magazine.
  6. The trigger is great!  It feels hyper-sensitive.  Reset is loud and tactile enough for me to know when it resets, without issue.
  7. I shot with the larger of the two backstraps…I honestly can’t tell which of the two fit better in my hand, though
  8. A lot of my shots were to the left of the bulls-eye (my left, when aiming).  At first, I thought the rear sight needed to be drifted, so I used Kentucky windage and aimed maybe 1-1.5″ to the right of the bulls-eye and I hit the bulls-eye.  I decided to stick with using the proper sight picture because I know from my prior range visits that I needed to work on trigger pull and finger placement.  Well, the last magazine was very good…I placed a good bit of my rounds in the bulls-eye while using the same sight picture I’d been using the whole session.
  9. Instead of continuing to become familiar with the TP9SA and work on muscle memory with this gun, I switched guns and shot with the SP2022 the last 20 minutes of the session.  This was a bad idea, as the next 20 minutes, my rounds were all over the place.  Next time, I’m only coming with one gun.

I’ve some video footage of the range session, but only of my SP2022. The video is here:

The target is far enough away to where you can’t see a damned thing…sorry about that.  I’ll work it out on the next visit.  I supposed I could lower the FOV setting on the camera, as well as move the target up a bit (in good/bad guy situations with handguns, 10 yards is a bit excessive as far as self defense goes, IMO).

Another thing I did was to test the 9mm Federal HST JHP I have, just to ensure it didn’t jam…I saved it for the last 5 minutes of the session, as I wanted to shoot them while the gun was dirty.  I shot 10 JHPs without issue.  As well, I was only able to shoot them through the SP2022.  I’ve 10 left…I’ll shoot those through the Canik on my next range visit.   The Canik cleaned up pretty well.  There’s quite a bit of barrel wear at the ejection port, though…just the paint coating, though.  It’s not a huge deal, although my SP2022 has more rounds through it and has NO outside barrel wear.  I did lube the Canik VERY well before the range session (with TW25B)…the rails looked good.  There was a tiny bit of wear on the underside of the slide itself, though, and I’ve no idea what caused it, but I’ll be sure to apply some grease to that area before the next visit.

The feed ramp already has what looks to be copper on it, where the bullets contact it while being fed into the ramp.  I’ll leave the ramp alone, though…as long as the gun functions properly, I’m happy.

I’m looking forward to the next range visit with this gun!

Categories
.45 ACP 9mm failure to chamber P220 range SP2022

Visited the Range Today!

First 15-round magazine through the SP2022…bulls-eye is a DA shot!

 

5 magazines

 

Cleaning…119 Rounds of carbon!

 

All clean!

I finally made some time to visit the range so I could break in the SP2022.  When I bought the gun, I also bought two 50-round boxes of American Eagle 115-grain FMJ.  I filled up all four mags with that ammo so that I could break in the magazine springs.  When I paid for range time today, I also bought two more boxes of AE.

I fired 119 rounds through the Sig Pro today…8 magazines worth.  I had one jam, which is great, but I don’t exactly know WTF happened…it wasn’t a failure to feed, since the first round fed…it wasn’t a failure to extract, since the brass didn’t need to be extracted at the time of the issue.  The trigger wouldn’t release the firing pin.  Also, the slide pretty much locked up…I had to muscle it open.  Once that round popped out, I slingshotted the slide…no more issues.  That was the only round of 119 that gave me an issue with the Sig Pro today.  Also, all four of the mags were new but two of them never had rounds in them (I only filled two of them).

The P220 experienced a very similar issue with a round not wanting to properly chamber or fire, although it wasn’t the first round or mag.  Maybe that was a limp wrist issue.  Or maybe it was one of the new magazines (three of the five are new).

I fired both the 2022 and the P220, alternating between the two.  I’m thinking I should’ve just focused on one gun at a time, because my aim wasn’t where I wanted it to be.  I sighted the bulls-eye but kept hitting left of it and sometimes upper left.  I did hit the bulls-eye a few times but I was very inconsistent.  The target stayed at 7 yards the whole hour.  This “aiming” issue might just be a trigger pull issue, as I dumped 4 mags in one target and there was a giant hole to the upper left where I consistently hit.  I need to work on my trigger pull (on both guns), I think.

Also, most people complain about the placement/size of the slide release on the SP2022.  They also tend to ride the slide release, meaning the last shot doesn’t lock back the slide (because they’ve triggered the release).  That didn’t happen at all during my first range visit with this gun (I made sure my thumb was away from the release lever…it took a conscious effort).

The SP2022 got the majority of my attention today, not only because it’s new (hell, they both are), but because it is easier to fire.  I hate to say this, but I hate the recoil of my P220…or maybe I just need to fire it more.  It has more recoil than what I’m used to and I’m finding it difficult to get used to.  That slide is still stiff as hell, too, although the mags are breaking in very well.  The next range day I have, I’ll spend an hour with the 2022 and an hour with the P220, just to give them dedicated time.

I also bought a new range bag, since I felt weird carrying my two beater bags to the range today (one was a cheap NRA bag dedicated to ammo and supplies (lube, barrel rod, screw driver set…POL-type stuff) and the other (an Army map case)  had my guns in the OEM gun cases.  The range had a store and had a Bulldog XL range bag that I bought, which is much nicer than that map case and the cheap bag that the NRA sent me.

Lastly, it looks like I might be moving to California to move nearer to my wife’s family.  I’ve found that I can keep the guns I bring with me (in fact, it is advisable to load up on any guns before I move, as the CA approved gun list has severe limits).  I’d still need to find a job in CA first, then a house within a specific price range that is a reasonable distance from the job.  This is ridiculously complicated, to the point that my guns definitely take a backseat to job and house search.  Wish me luck!