Tag: Rock Ultra

Categories
1911 9mm Rock Island Armory Rock Ultra Tac Ultra

My Rock Island Armory Rock Ultra MS 9mm is Fixed!

For some reason, I decided to take a look at my RIA Rock Ultra MS today, as it’s been sitting in a drawer the past 2 years since the front sight came off.

A while back, I ordered another (OEM) front sight but had been shying away from installing it myself. The new front sight was bought from Armscor (was maybe $20). The only reasons I’ve held off on installing it is because I’ve never done it in the past and because I’ve been busy with other guns.

I decided to try my hand at installing the sight. I’ve files but they’re cheap – I was hoping I wouldn’t need a file. I had sandpaper on hand. I’d slowly sand off the bottom of the front sight for maybe 10-15 strokes, and then test fitment on the slide. I don’t think I even needed to file the bottom down, because I think the slide has too much cut from the front (gun maker’s error). This is probably why I found so much red thread-locker under the front sight. I also have a hammer/punch kit that came with two heavy nylon rods (specifically provided for fitting parts). I was able to tap the front sight in. I used no thread-locker since I tend to get my guns hot at the range. I don’t want to depend upon thread-locker, but I honestly don’t think I need it, the sight is so snug on the dovetail.

The sight did not come with a fiber optic element but I have some on-hand. I installed a Tru-Glo rod.

This gun is now ready for the range again.

I thought I’d shot a lot through it but, per my records, I’m currently at 590 rounds through the gun. I’ll take it to the range soon so that I can test the sight…it shouldn’t come off — I used a decent amount of effort to get the sight onto the slide.

Last I remember (and per my notes, again), this was one of my favorite guns to shoot before I bought the SAS II Ultralight and S15. I shoot it extremely well, even at distance. The trigger is heavy, though…feels like maybe 5 lb, but I’ll test that again soon and update the post with the results. The gun has a thick bull barrel and is heavy, so it’s going to feel more planted that the Ultralight. I’ve a RIA Tac Ultra MS that is bushing-barreled and the Rock Ultra MS feels more solid/tight.

As I’m out of 9mm ammo, I’ll be visiting Cabelas tomorrow to grab maybe 250 rounds of WWB for the SAS II UL, since I’m close to 2000 rounds out of that gun.

Update – Trigger pulls of Rock Ultra

1 – 4 lb 8 oz
2 – 3 lb 13 oz
3 – 4 lb 2 oz
4 – 4 lb 6 oz
5 – 4 lb 14 oz
Average of 5 for Rock Ultra – 4 lb 5 oz
Average of 5 for Tac Ultra – 2 lb 14 oz

Categories
22TCM9R 9mm AF1911-S15 Alpha Foxtrot range visit RIA Rock Island Armory Rock Ultra

Range Day with the RIA 1911 and AF1911-S15

Yesterday, I visited the range for the first time in maybe a month.

Since I’m now carrying the AF1911-S15, I wanted to shoot a good bit from it. As well, I wanted to shoot the my RIA 22TCM 1911, as it has minimal recoil and wanted to check to see how fast I could shoot it.

I also tried to use the SIG Connect OHD phone app to get some practice shooting in, but the app appears to require wifi or cellular band connectivity when being used – it would not let me use the app without logging in, and I couldn’t log in while on the range because they’ve no wifi/cell connectivity when in the shooting booth. Because of this, I decided to cancel my subscription. Last range visit, I tried to use the app but couldn’t because I couldn’t properly aim the phone’s camera using the desk tripod I had, so I bought a new tripod that had lots of adjustability. Now there’s this problem with wireless connectivity with the app. The app appears to be too high maintenance for me.

I shot 120 rounds of WWB 115 gr FMJ from the S15. There were two fails to feed, but I know this was almost certainly due to the ammo being not-so-good, as I could feel the slide sometimes moving slower than normal after a round detonated. As well, I neglected to oil the gun (which is a huge no-no, since I’ve been carrying the gun a bit now and the lube has probably dried or moved). As well, there were a few times where the slide wasn’t locking back on the last round, but again, this is probably due to the cheap WWB ammo.

With the S15, I was attempting to shoot quickly from low ready and was fairly successful at hitting where I was aiming at 7 yards – I was actually stacking many of the rounds on top of one another. I think the light on the gun (this is a first time of me shooting a gun with a WML) makes the gun shoot flatter (not that it wasn’t shooting somewhat flat before then).

I also shot 50 rounds of 22TCM9R from the 22TCM 1911. There was at least one instance of the primer blowing out, but I didn’t notice, as the brass ejected without issue. Even so, the slide didn’t lock back and the hammer didn’t cock, but there was a round in the chamber — odd.

I shot both guns somewhat fast. I shot between 5 and 10 yards and attempted to group my shots (was shooting groups of 5). I was also attempting to quickly use the iron sights, as well as conduct quick follow-on shots.

I may have to adjust the rear sight on the 22TCM 1911, as I’ve never zero’d it at 10 yards and at 10 yards, I’m always pulling shots left.

It also may be time for me to start thinking about getting the slide of the S15 cut for an optic (will be using the Holosun optic footprint).

I’m now at 1187 rounds through the S15 and 1097 rounds through the RIA Commander with the 22TCM barrel.

I think I’m going to start shooting the RIA Commander using the 9mm barrel from now on, just to get some rounds through that barrel. I do love 22TCM9R, though.

This was a fun range visit.

Categories
1911 iron sights RIA Rock Island Armory Rock Ultra Tac Ultra

RIA Rock Ultra MS – Front Sight Fell Off

I’m not sure why I haven’t posted about this yet, but a few months ago (Jan/Feb timeframe) I was cleaning my RIA Rock Ultra MS and noticed that the front sight was very loose. I’m not sure what occurred to loosen it, but I’d been carrying that particular gun for a while and hadn’t noticed that issue until it happened.

I was carrying that handgun in a Tenicor kydex holster, but the kydex doesn’t touch the front sight. I do remember dropping the gun once, on a carpeted floor. I’m thinking that might have been enough to dislodge the front sight. I can’t remember how the gun landed, but if it landed on the front sight, that would explain why the sight was loose.

The front sight was loose enough to where it slid all the way out of the dovetail with very little effort. Not only that, but the dovetail edge was surgically sharp and sliced my finger badly (had an issue stopping the bleeding).

When I cleaned the slide of blood, I saw that it looked as if the only thing that kept the sight in place was red threadlocker. I could see old threadlocker on the bottom of the sight and in the dovetail. I’m almost certain RIA didn’t fit this sight to the dovetail, otherwise I wouldn’t have been able to slide it back on and off the slide.

I’ve ordered another sight (from Armscor) but do not have the tools needed to perform an installation (I’ve no vise, I’ve no files, I’ve no sight pusher).

I can either order the needed tools or give the slide and sight to a local gunsmith so that they can install it.

After I had the issue, I couldn’t carry the gun, but I ended up installing the 9mm barrel to my 22TCM RIA Tac Ultra so that I could carry that gun instead. That gun also fit in the Tenicor Certum holster.

Categories
10mm 1911 1911A2 2011 double-stack double-stacked HC Hinterland Outfitters MS RIA Rock Island Armory Rock Ultra

10mm 1911s

I’ve a 10mm 1911 on the way here.  It’ll be my first full-sized 1911 and my first 10mm.  I purchased a RIA Rock Ultra FS HC chambered in 10mm.  I’d been looking at Glock 20s and 29s but didn’t want the shock of recoil to bug me.  While the Glocks weigh around 2 lb empty, the RIA 10mm weighs around 2.5 lb and is all steel.  I won’t be carrying this gun but I do want to experience 10mm without regret.  As well, I had a difficult time finding a Glock 20 and 29 in stock.

What’s cool about this 10mm is that it is double-stacked (what some folks call the M1911A2; it’s not a true 2011, as the 2011 is modular in nature while the M1911A2 is not).  It is a full-featured handgun.  What’s not cool is that the handgun only comes with one magazine.

It’ll probably be 2 weeks before it ships to my FFL.  The FFL will probably take another week to call me to pick it up.  In 3 weeks time, expect a table top review.

I’m about to order another magazine and will begin looking for ammo.  I hope to have both the mag and ammo will be here before the gun arrives.

This is what I ordered (from Hinterland Outfitters):

UPDATE (2/15/2021) – I just got notice that the firearm shipped on 2/12…headed to my FFL dealer now…may be a while though, since there’s severe weather in the mid-West right now.