Categories
1911 2011 Bul Armory SAS II Ultralight

Bul Armory SAS II Ultralight 3.25″ – It’s Here!

It took some effort to get it today, but I did! It’s here – my first 2011!

I thought it would be a quick thing, as I’m usually in and out of a gun shop within 30 minutes when retreiving a firearm. Something happened, though.

I found that my driver’s license expired a month ago. They wouldn’t let me get my gun without a license renewal. I went straight to the DMV and, luckily, it wasn’t packed, nor was it slow. It took me maybe half an hour to get my new license – well, they gave me a temp until the new one arrives in the mail.

I went back to the gun shop and gave them both the expired and the temp license and was able to get the gun.

I used a new-to-me FFL. The experience wasn’t bad but was unusual. What I didn’t like was that they didn’t let me see the gun before the transfer process was completed. I definitely didn’t like that, as that gun could’ve had damage or could’ve been missing a mag. I like to get a looksee of the gun before the transfer is finalized.

Anyways, I checked out the gun in their parking lot while in my car. The very first thing I noticed (and everytime I pick it up, I notice it immediately) was that the firearm is extremely light. Another thing I noticed is that it’s very small. It’s not my smallest handgun but it’s close. It’s definitely my lightest 1911 handgun, though, and would be the lightest if it weren’t for my Glock 19 (it’s lighter by 3 oz). The SAS II grips are a tad bit slippery, IMO, but my hands are sometimes dry and ashy.

The sights are NICE. The fiber optic element is bright and the rear sight is blacked out. The rear sight notch is also small, so I have no doubt that this gun is probably accurate, too.

The gun racks well. Slide to frame fitment had a miniscule bit of play. The extractor at the back of the slide is flush. The trigger is money! I did a 3 pull average with my trigger gauge and it averaged at 2 lb 14 ounces.

It comes with two mags. I’m thinking on ordering two more. I’m also thinking on getting an optic, the Holosun 507K X2 ACSS or EPS Carry.

I did have issues field stripping it. I had issues getting the slide catch out while keeping the slide back at the takedown notch.

I will be shooting this gun a while before trying to carry it, because there are many folks that have had issues with their SAS II ULs. Either their guns won’t feed JHP properly or their guns exhibit limp-wristing-like symptoms.

If I have similar issues as to what others are having, I’ll give Bul Armory a chance to fix it, but I won’t have a problem selling the gun and using the cash to get a Staccato instead.

Categories
2011 Bul Armory SAS II Ultralight

Purchase Confirmed! I’ve Bought My First 2011!

Bul Armory 2011 – SAS II Ultralight 3.25″

I committed to purchasing the Bul Armory SAS II Ultralight. At one point during the purchase process, I cancelled the process, went to the Alpha Foxtrot page and almost started to order that gun instead.

I then went back to the Bul Armory page and committed to the purchase process.

Now, I’m trying to sort through the FFL process. It’s odd that Bul Armory wants the buyer to reach out to the FFL to obtain the FFL. In my experience (I’ve bought a shitload of guns via FFL), the seller reaches out to the FFL or the FFL reaches out seller to share FFL info. Asking the buyer to do that is fucking odd, in my opinion.

So, why did I almost change my mind about the Ultralight purchase? I saw the price of Ultralight mags. They are not cheap. The AF1911 S15 uses Shield Arms mags, which are cheap.

Why didn’t I buy the Alpha Foxtrot S15 instead? Their reliability/dependability is unknown. It’s an absolutely beautiful gun, but I need a carry gun to be reliable.

So, I now need to know if the SAS II UL will fit in my currentl Tenicor Certum 3 holster. UPDATE: I do believe my current holster will fit this gun! It should fit anything that’s under 4.25″ in barrel length.

I’ll also need 2-3 more mags. I also plan to try an optic with this gun.

Needless to say, I’m excited!

Categories
1911 2011 handguns

Thoughts on 1911s and 2011s

So, my bonus is on the way.

I still haven’t decided on which gun to get – Bul Armory SAS II Ultralight or the Alpha Foxtrot S15 1911.

Looking at Bul Armory’s website, they’re selling directly from the website, which is good because Gunbroker has a high markup and all I’m seeing is examples for bidding only. MSRP is a lot lower than I’d thought. I’ve also been wondering on the Comp edition, but it’s $300-400 higher and the comp can’t be removed (plus, it may require a custom holster to accommodate the comp).

I checked Gunbroker and up until now, the AF S15 was available – they’re now sold out, but I suppose I can reach out to the manufacturer’s web page.

On top of that, the EAA Girsan Witness 2311 appears to be on the verge of being released to the public. I’m seeing placeholder listings at Wikiarms.com (specifically at Search “eaa witness 2311” for sale | WikiArms AmmoEngine). These have a starting MSRP of $999 but many of the listings are below MSRP. They’re selling 10mm in 4.25″, 5″, and 6″, and they’re selling 45ACP in 3.5″, 4.25″, and 5″. I do not see any listings for 3.5″, which they’re supposed to be selling.

The con with the 2311 is that I do not know anything of the gun. For example, I’ve no idea on the gun’s metallurgy, nor the reliability of EAA 1911s in general. It’s also a first run for them, so they’re bound to make some mistakes. I’ve no idea of their warranty coverage and customer support dependability. I might just wait a bit for the 2311.

I was also looking at getting the Canik Mete MC9 but it’s currently having issues and I don’t actually need that gun – it’s a want that I can buy later on (ie, there’s no rush).

So, it’s still either the Bul Armory Ultralight or the AF S15 1911. I might have to flip.

Categories
1911 Canik handguns

Annual Gun Buy is Almost Here!

It’s almost time for my annual bonus. Every year, I get 1-2 firearms.

Shot Show 2023 exhibited a lot of promising guns this year!

Rock Island Armory (RIA) has released two new firearms – the BBR 3.10 1911 in 9mm and the LI380.

The BBR 3.10 still looks as if the grip was an afterthought. I’m not sure I’d like this gun even as a range toy. Yeah, the gun should be more manageable in 9mm (versus the 45ACP of the original 1911). This gun looks good but isn’t for me.

The LI380 is almost certainly a rebadged (or licensed copy) of the Bersa Thunder 380. I already have one of those, a Plus model.

I frequent the r/1911 subreddit group. Someone asked about a particular 1911 and posted a picture of the Fusion Firearms 1911 Riptide Carry. It is a Commander-sized (4.25″) 1911 that is bob-tailed and chambered in 10mm, 45ACP, or 9mm. It is blued with nice wood grip panels. It is made by a gunsmith that used to work at Dan Wesson. The gun goes for $800-$900. It looks NICE. I’m considering this gun in 9mm.

I’m also looking at the newly press-released Canik Mete MC9, which is a micro-compact polymer handgun that is very similar but smaller than the TP9 Elite SC. It usese the same mags as all of the other Canik handguns. I’m definitely getting this firearm, as it’s MSRP is $439 and I can use my Elite SC mags with it.

There’s also the Springfield Armory Prodigy DS, which is not only a double-stacked 1911, but is a legit 2011 (the grip being modular, which is typical of all 2011s). If I obtain this firearm, it will be the version that comes with the Hex Dragonfly optic. This firearm is in the $1500 range.

There’s also the EAA/Girsan 2311, a new 2011 offering and this handgun starts at $999! It is optics-ready, is a true 2011 (grip is modular), will come in 10mm, 9mm, and 45ACP, and will come in four barrel lengths. I’m leaning toward this firearm in 9mm.

There’s also the Dan Wesson TCP, which is a single stacked 1911 but is, well, a Dan Wesson. It has a rail and has a tri-topped slide. It has a gold bead front sight, too. These can be found in the $1500 range. I’m leaning towards the 9mm version of this handgun.

I’m also eyeing the Bul Armory SAS II 3.5″ Ultralight 1911, which can be found in the $1400 range.

What’s currently decided is that I’m getting the aforementioned Canik Mete MC9. I’m not sure which 1911 I’m going to get yet. It’s a toss up between the Bul Armory SAS II Ultralight, the Springfield Armory Prodigy DS with optic, the EAA/Girsan 2311, or the Dan Wesson TCP 9mm. I really really want a 2011 variant, so I suppose the Dan Wesson is out. Of the 2011 variants, the EAA will be unproven since it is their first offering, so I suppose that gun is factored out based on that fact. Of the Bul Armory and the Springfield Armory Prodigy DS, the Prodigy DS has been having reliability issues, so, I could factor out that gun from the choices, which leaves the Bul Armory as the most likely handgun of choice!

Now, if I get the Bul Armory, holsters will be problematic, as I’ve spent close to $200 on holsters for Commander-sized 2011s the past two months. Well, if I’m buying a $1500+ gun, another $100 for a good holster (Tenicor) is a drop in the bucket, IMO, so I guess I can either see if the SAS II will fit in my 4.25″ Tenicor holsters first, or just straight-up order a new one. We’ll see.

UPDATE: I’d decided on the SAS II but then started focusing on the sights – I don’t really care for them, especially since the rear sight has to be removed to use an optic. That’s a huge turn-off. I’ve also seen at least one review that complains that the SAS II UL is so light that it feels snappy. That could be a problem, as well. The Prodigy 4.25″ is better in that regard, but I’m betting the SAS II TAC doesn’t have the same aforementioned issue with the rear sight. Then I started thinking about the EAA Witness 2311 – it will come in 4 barrel lengths and is optics-ready, which means they’ll be selling a 3.5″ variant (no idea how small, but it’ll be in the 3″ range). They said all 9mm 2311s will carry 17 rounds, so I won’t be losing any ammo capacity if I go the EAA route. So, as of 1/28, I’m leaning toward the EAA Witness 2311, or Bul Armory SAS II TAC, or the Prodigy DS 4.25″.

UPDATE 2: Well, shit. There isn’t much info provided on the Witness 2311, but I looked at the press release page and saw that there’s at least two slide versions: with and without optics cuts. Also, the optics-ready version will remove the rear sight when using an optic. WTF is up with that trend? I’m at a loss on which to choose. I’ll probably wait a bit for EAA to add the Witness 2311 to their product list, since I know NOTHING about that firearm. For example, what’s it’s weight? It’s not going to be lighter than the SAS II Ultralight, that’s for sure (my guess is that it’ll weigh close to 2 lb).

UPDATE 3: While waiting for the annual bonus to be released, I’ve been conducting research on my potential choices. I continue to see complaints of the SAS II Ultralight being snappy, and since I hate snappy guns, I think I’m going to put the choice of Bul Armory aside. This sucks because recoil perception differs from person to person – I may find that I can handing the SAS II fine, but I’m not willing to risk getting one only to be disappointed. I’m now focused on the Alpha Foxtrot S15 1911 (not a true 2011-spec gun – it’s a doublestacked 1911) or the Dan Wesson TCP, in that order. Following those two choices is the Fusion Firearms Riptide C. Why did the EAA Witness 2311 get bumped down? I have yet to see anything from EAA on the gun, other than what they showed during Shot Show 2023 and the pre-release details of that gun that they released back in December. So, as of 2/12, it’s the Alpha Foxtrot S15 as the gun of choice, unless I find any information that disqualifies it, then it will be the Dan Wesson TCP in 9mm.

UPDATE 4 (LOL): I’ve just discovered that the EAA Witness 2311 will be released to consumers in April 2023. So, with that being said, the Witness is back in the hunt. I’m thinking I’ll just stay with the Alpha Foxtrot, and get the Witness next year. Or, get the Witness this year and wait for the Alpha Foxtrot next year. I could get both in one shot but if I’m going to do that, I may as well get a Staccato 2011, but I’m not buying a $2K+ handgun…I can afford it but spending that much money on any handgun is fucking ridiculous, in my opinion.