Categories
9mm Canik Elite Shooting Sports range visit SP2022 TP9SA

A Range Report: Shooting The Canik TP9SA And Sig SP2022!

I took the TP9SA to the range this weekend.  It shot well!  I’m very impressed.

Some notes:

  1. This is the first striker-fired gun I’ve ever shot.
  2. I shot 108 rounds of Remington UMC 115-grain (megabox).
  3. I was shooting from a distance of 10 yards.
  4. There was one stovepipe that occurred when firing the first magazine.
  5. There was one failure to feed that occurred when firing the second magazine.
  6. The trigger is great!  It feels hyper-sensitive.  Reset is loud and tactile enough for me to know when it resets, without issue.
  7. I shot with the larger of the two backstraps…I honestly can’t tell which of the two fit better in my hand, though
  8. A lot of my shots were to the left of the bulls-eye (my left, when aiming).  At first, I thought the rear sight needed to be drifted, so I used Kentucky windage and aimed maybe 1-1.5″ to the right of the bulls-eye and I hit the bulls-eye.  I decided to stick with using the proper sight picture because I know from my prior range visits that I needed to work on trigger pull and finger placement.  Well, the last magazine was very good…I placed a good bit of my rounds in the bulls-eye while using the same sight picture I’d been using the whole session.
  9. Instead of continuing to become familiar with the TP9SA and work on muscle memory with this gun, I switched guns and shot with the SP2022 the last 20 minutes of the session.  This was a bad idea, as the next 20 minutes, my rounds were all over the place.  Next time, I’m only coming with one gun.

I’ve some video footage of the range session, but only of my SP2022. The video is here:

The target is far enough away to where you can’t see a damned thing…sorry about that.  I’ll work it out on the next visit.  I supposed I could lower the FOV setting on the camera, as well as move the target up a bit (in good/bad guy situations with handguns, 10 yards is a bit excessive as far as self defense goes, IMO).

Another thing I did was to test the 9mm Federal HST JHP I have, just to ensure it didn’t jam…I saved it for the last 5 minutes of the session, as I wanted to shoot them while the gun was dirty.  I shot 10 JHPs without issue.  As well, I was only able to shoot them through the SP2022.  I’ve 10 left…I’ll shoot those through the Canik on my next range visit.   The Canik cleaned up pretty well.  There’s quite a bit of barrel wear at the ejection port, though…just the paint coating, though.  It’s not a huge deal, although my SP2022 has more rounds through it and has NO outside barrel wear.  I did lube the Canik VERY well before the range session (with TW25B)…the rails looked good.  There was a tiny bit of wear on the underside of the slide itself, though, and I’ve no idea what caused it, but I’ll be sure to apply some grease to that area before the next visit.

The feed ramp already has what looks to be copper on it, where the bullets contact it while being fed into the ramp.  I’ll leave the ramp alone, though…as long as the gun functions properly, I’m happy.

I’m looking forward to the next range visit with this gun!

Categories
.45 ACP 9mm failure to chamber P220 range SP2022

Visited the Range Today!

First 15-round magazine through the SP2022…bulls-eye is a DA shot!

 

5 magazines

 

Cleaning…119 Rounds of carbon!

 

All clean!

I finally made some time to visit the range so I could break in the SP2022.  When I bought the gun, I also bought two 50-round boxes of American Eagle 115-grain FMJ.  I filled up all four mags with that ammo so that I could break in the magazine springs.  When I paid for range time today, I also bought two more boxes of AE.

I fired 119 rounds through the Sig Pro today…8 magazines worth.  I had one jam, which is great, but I don’t exactly know WTF happened…it wasn’t a failure to feed, since the first round fed…it wasn’t a failure to extract, since the brass didn’t need to be extracted at the time of the issue.  The trigger wouldn’t release the firing pin.  Also, the slide pretty much locked up…I had to muscle it open.  Once that round popped out, I slingshotted the slide…no more issues.  That was the only round of 119 that gave me an issue with the Sig Pro today.  Also, all four of the mags were new but two of them never had rounds in them (I only filled two of them).

The P220 experienced a very similar issue with a round not wanting to properly chamber or fire, although it wasn’t the first round or mag.  Maybe that was a limp wrist issue.  Or maybe it was one of the new magazines (three of the five are new).

I fired both the 2022 and the P220, alternating between the two.  I’m thinking I should’ve just focused on one gun at a time, because my aim wasn’t where I wanted it to be.  I sighted the bulls-eye but kept hitting left of it and sometimes upper left.  I did hit the bulls-eye a few times but I was very inconsistent.  The target stayed at 7 yards the whole hour.  This “aiming” issue might just be a trigger pull issue, as I dumped 4 mags in one target and there was a giant hole to the upper left where I consistently hit.  I need to work on my trigger pull (on both guns), I think.

Also, most people complain about the placement/size of the slide release on the SP2022.  They also tend to ride the slide release, meaning the last shot doesn’t lock back the slide (because they’ve triggered the release).  That didn’t happen at all during my first range visit with this gun (I made sure my thumb was away from the release lever…it took a conscious effort).

The SP2022 got the majority of my attention today, not only because it’s new (hell, they both are), but because it is easier to fire.  I hate to say this, but I hate the recoil of my P220…or maybe I just need to fire it more.  It has more recoil than what I’m used to and I’m finding it difficult to get used to.  That slide is still stiff as hell, too, although the mags are breaking in very well.  The next range day I have, I’ll spend an hour with the 2022 and an hour with the P220, just to give them dedicated time.

I also bought a new range bag, since I felt weird carrying my two beater bags to the range today (one was a cheap NRA bag dedicated to ammo and supplies (lube, barrel rod, screw driver set…POL-type stuff) and the other (an Army map case)  had my guns in the OEM gun cases.  The range had a store and had a Bulldog XL range bag that I bought, which is much nicer than that map case and the cheap bag that the NRA sent me.

Lastly, it looks like I might be moving to California to move nearer to my wife’s family.  I’ve found that I can keep the guns I bring with me (in fact, it is advisable to load up on any guns before I move, as the CA approved gun list has severe limits).  I’d still need to find a job in CA first, then a house within a specific price range that is a reasonable distance from the job.  This is ridiculously complicated, to the point that my guns definitely take a backseat to job and house search.  Wish me luck!

Categories
9mm magazines polymer Sig Sauer SP2022 trigger

I’m the New Owner of a Used Sig SP2022!

I thought I’d only get one magazine (the ad said only one was included), but I ended up with two!  That’s a huge deal, as they are expensive.  And I just got two new mags for this gun, too!  Now, if I’d paid attention to the ad pictures, I’d have seen that there were two mags in the pictures (one in the gun and one in a clear plastic bag).   What else?  It has the round-in-chamber indicator on top of the gun, which is pretty damned cool (I’ll keep visually checking the chamber, though).  I also swapped out the installed backstrap for the bigger one…it feels much better.  The grips are difficult to remove (needs a big screwdriver and some leverage).  I wonder if I should lube the mount area…

I cleaned it (surprisingly, it was filthy…like it had been shot a few times and not cleaned…it’s supposed to be new…WTF) and found that this example has a metal recoil spring guide.  There are many videos stating that this was plastic and people were replacing them with aftermarket metal guides.  I’ve no idea how this affects the limited warranty that covers new Sig products.  Based on the fact that the gun had obviously been fired and because it has a metal recoil spring guide, the gun is more than likely not new.  It’s not a huge deal, but it was misrepresented nonetheless.

I bought 100 rounds of American Eagle FMJ 9mm rounds ($17 a box at the gun shop).  I also bought a box of 20 Federal HST JHP 9mm ($28??!).  9mm is cheaper than .45ACP, that’s for sure!  🙂

I loaded up two magazines to begin the break-in period…they’re stiff as hell.  The other two mags are empty.  I’ll rotate the rounds from one to the other…I don’t want all my ammo in the mags.  They hold 15 rounds apiece, so that would be a significant amount of my ammo.

This gun is sweet!  It’s different than my Equinox.  The Equinox looks and feels (and IS) expensive.  The SP feels more…practical.  It actually fits my hands better…the grip is fantastic, even if it’s plastic (yes, this is a polymer gun).  The trigger even feels a bit better, although I haven’t compared reset between the two.  My wife prefers the feel of the Equinox (the feel of money…LOL) over the SP.  I like both of them in different ways.

I plan to visit the range tomorrow and maybe even Sunday and Monday, just to get some practice in.

Categories
ammo ammunition Cabelas Dicks magazines P220 SP2022 Walmart

My Magazines Have Arrived!

A few days ago, Cabelas had an online-only Sig Sauer magazine sale…$22.49 for each magazine in stock.  Since Sig mags tend to be expensive (running around $50 each), I decided to get three to augment what my P220 came with.  It came with 2 x 8-round magazines.  I bought 1 x 8-round mag and 2 x 10-round magazines.  Note that this sale ended yesterday.

They arrived this afternoon and I immediately cracked them open and loaded them with rounds so that they’d break-in.  I also marked all five magazines (I numbered them), in case I needed to track mag failures.  Of the five, I loaded one with my Hornady JHP 185-grain rounds (which reminds me…I need to find an outdoor range so that I can test the JHP to ensure the gun will shoot them.

I also ordered 2 x 15-round magazines for my Sig Sauer SP2022 9mm that hasn’t arrived yet.  This is the gun that people have a difficult time finding mags for, so I wanted to take advantage of the sale…once I saw that they had them in stock, I ordered two.  The SP2022 only comes with one magazine, so I probably needed to get extras anyways.  I haven’t bought 9mm ammo yet…I’ll buy a box or two of FMJ and a box of JHP in 9mm when I pick up the gun from the FFL.  I marked these mags, too.

Hopefully, I’ll be able to go shooting this weekend and try out the new gun and extended P220 mags.

My next project will be to find an online store where I can order ammo in bulk, to cut costs.  I buy my ammo from Dicks since they’ve been having holiday sales, but I think I can do better by buying online.  I’d check Walmart but I’ve never been able to get someone to help me in the firearms section.  :/