Tag: magazine

Categories
1911 2011 double-stack double-stacked Prodigy DS Springfield Armory

Shooting Self Defense Ammo From The Prodigy DS Compact

I visited the range yesterday with several goals in mind.

I wanted to test other self defense (SD) ammo from the Prodigy DS Compact so that I can know of other JHP options.

I also wanted to zero the Holosun 507K that is now attached to the gun (removed it from the Ultralight since I’ve stopped carrying it).

I also wanted to shoot the gun with the Streamlight TLR-7X attached.

As well, I wanted to see if I could finaly use the SIG Connect OHD training app at the range.

For ammo, I brought

  • 25 rounds of Barnes Vor-TX 115-gr JHP
  • 25 rounds of Federal Premium HST 124-gr JHP
  • 50 rounds of Speer Gold Dot 124-gr JHP (I only shot 15 rounds of this)
  • I also shot 50 rounds of Blazer 124-gr FMJ.

I ended up shooting more SD ammo than I did range ammo.

There were no failures to feed or extract.

I can’t remember the last time I’ve cleaned the gun (I usually run a bore snake through the barrel, though). I’ll maybe clean the gun tomorrow.

I’m currently at 771 rounds.

I spent half the range session zeroing the 507K optic to the Prodigy DS Compact. I think I like the Cyelee optic better – I’ve grown used to the green dot. If I end up not adjusting well to the 507K, I can always switch to something else…I’ve been eyeing the Cyelee Wolf EDG. I’ve also been thinking of the Viridian RFX-44 (which is an RMSc-footprinted and closed emitter optic). We’ll see.

I finally got the OHD training app to work. I’ve been trying to get it to work the past 6 or so months. It’s been requiring a network connection to work, but the firing line at the range doesn’t have Wifi or network connectivity. After testing a week ago, I decided to let the app developers know of the issue. At first, they insisted that there was an issue on my end, but after showing them that I could reproduce the issue and that it was an app issue, they backtracked and said it was a bug within the app. They said they’re fixing the bug.

They gave me free 30 days of premium access to the app. I’m not sure I’m going to continue to use it, as it has limitations. One limitation is that it won’t register impacts when the impact lands on a prior impact point. As well, the targets I printed are 8.5 x 11 and at 15+ yards, those are difficult to use if firing quickly – I’m used to shooting at man-sized targets when shooting afar. I suppose I can try to shoot printer paper up close, but even then, that’s rather small when shooting quickly, no matter the distance.

My next goal is to research how to easily carry an extra magazine. I’d recently bought the QVO Tactical Flex Connector, which is a side car for use with their More Discreet holster. The side car contains a mag holder. I tried to carry using that holster and didn’t like the side car at all…it’s extra bulky, which I don’t like. It makes me feel pregnant, as the attachment portion of the side car pushes out further than the actual holster itself. So, for now, I’m back to carrying an extra mag in my cargo pocket.

I’ll need to order more range ammo soon, as I’m quickly burning through the 1000 rounds I recently bought. One thing: I’m not sure if I like the Blazer 124-gr ammo that I recently purchased – it doesn’t seem to be as accurate as the Magtech 115-gr ammo I’d used prior to the last purchase. Yes, I know that the point of impact will change between the two weights of ammo, but I think I prefer the Magtech better, as it generally hits where I’m aiming (which isn’t always the case with this batch of Blazer).

I’ll continue to post updates.

Categories
ammo gun belt handgun holster magazines OWB training

I’m Preparing For My Next Pistol Course

December is approaching and I promised that I would take another pistol training class this year. I might not be able to fit it into 2024, sadly, but if not, I’ll try for Q1 of 2025.

That means I’ve to ensure I’m ready. I’ll need ammo and equipment.

I need 600 rounds of range ammo, with 100 of it being frangible.

I already have a duty belt from Wolf Tactical – I received two of them for Chrismas last year. They’re nice belts, too. They’re dual belts with a nice clasp. It’ll accept molle gear, as well.

I also need mag pouches. They can be easily bought from Amazon and I just need something that’ll allow three mags on the belt (whether it’s one pouch or three). I don’t have the mage pouches yet, but I’m thinking of these.

I’m not even sure which gun to take, but it’ll have to be a 1911 or 2011. Why? Because I went ahead and ordered an OWB holster (a requirement for the course) for a 5″ 2011 (it should fit a 1911 as well). Specifically, I bought the QVO Tactical 5″ “Secondary” OWB holster. They’ve what they call a quick-ship version (it’s already built and ready to ship – customization isn’t allowed for those shipments)…it was $100. The holster doesn’t accept weapon-mounted lights, but that’s OK. The holster mounts to the belt via metal angled belt loops.

The current plan is to take m Tisas DS9 since I already have 1000+ rounds through the gun.

If I haven’t yet taken the class by April 2025, I’ll wait a bit because I’m planning on buying two guns this coming spring and at least one will be a 2011. I’m looking at the new Kimber 2K11 – that’s a $2000 gun, so if I get that, I won’t get another. If I opt for something other than the Kimber 2K11, it’ll probably be a Springfield Armory Prodigy DS 5″ with the optic and three mags package, along with the Fusion/Ermox XP Pro. All of those guns are 2011s and should fit in the aforementioned holster. Then again, if I do decide to take whatever I buy in 2025, I’m going to have to postpone the training course until I get enough rounds through whatever I end up buying….I should probably just use the Tisas Carry DS9.

I also have several other compact- and larger-sized guns that I can use for the course. There are guns that I bought over the years that came with their own holsters, and all but the P320 have 3 mags:

  • Sig Sauer P320 Compact – paddle-style holster
  • Sig Sauer SP2022 – paddle-style holster
  • Canik TP9SA (x2) – Safariland-type holsters with paddles
  • Canik TP9 Elite SC – minimal style holster – covers trigger

Of the four above guns, the SP2022 would probably be the one to choose, but I don’t want to be messing with trying to cope with a DA trigger. At one point in time, DA/SA was all I’d carry, but things have changed and I’m now a SA guy – I don’t want to train to use two trigger types, so the SP2022 will be a backup gun for the training.

Or, I could forego that above list and focus on 1911s/2011s. I just didn’t want to bring a 1911 and have issues during the course – I don’t want to be that one 1911 guy that has constant feed issues. The Tisas has only had one fail to feed in like 1200 rounds, so I’m thinking it won’t have issues (I’ll stick with the ammo it’s been eating without fail – Blazer 124-gr FMJ).

Really, the only thing I need to determine now is what frangible ammo to buy. I’ve 50 rounds of Hevi-shot 9mm frangible that’s in the back of my safe, but I’m not sure if the Tisas will eat it (it should – my RIA Commander ate that ammo without issue).

Categories
.45 ACP 1911 B45R magazine SDS Imports Wilson Combat

I Upgraded To A Wilson Combat Magazine Release On My Tisas Duty B45R 1911!

Regarding the SDS Imports 1911D B45R I recently purchased, I mentioned here that it had problems with some non-OEM mags. Specifically, Wilson Combat mags were hanging upon insertion attempts. The Metalform GI mags were exhibiting the same symptoms, too.

I stated that I’d ordered a Wilson Combat magazine release. Well, it arrived Friday. I’d never removed and installed one, so that was something new to me, and it took awhile to understand how I needed to remove it, as well as how I needed to install the new one. It was simple, once I understood what I needed to do.

Once it was installed, I checked to see if the mags would snag/hang on the mag release catch. For the WC mags, they don’t. The GIs are weird, as they begin to stag and end up not snagging – there’s some slight resistance. The feed lips on the GI mags are not rounded, so I believe they’re more susceptible to resistance. I think they’ll wear-in over time, though.

So, I recommend the WC magazine release button, spring, and screw (they’re not a set…you’ve to buy each). As of now, the cost for the three parts is approx. $25.

Categories
Canik subcompact TP9 Elite

Was Finally Able to Obtain a TP9 Elite SC Magazine

Three weeks ago, I got a notice that Grabagun had TP9 Elite SC magazines back in stock, but I didn’t see the notice until 3 hours after it was posted – when I logged in to purchase some, they were again no longer in stock.

Last week, I got another notice and saw it within 20 minutes of receiving the e-mail. When I logged in to purchase, I saw they were still in stock, but when I tried to purchase two of them, the system would error out with an obscure message. After investigating and testing, I found that Grabagun only had one magazine left. Either all but one had sold within 20 minutes or Grabagun only got a few restocked. I ended up purchasing that one magazine.

A few things:

The mag was $37.69. Shipping was $5.42. With tax, the order was $44 and some change. That’s quite a bit for one magazine.

Also, the mag was a 10-round magazine with a flush mag plate. I’d wanted 12- or 15-round mags, but since I hadn’t seen any in stock going on six months, a 10-round magazine is better than no mag at all.

I also saw a post on the Canik reddit page that someone had bought a 10-round mag and had ground down the nubs that limit it, regaining the 2 extra rounds. I’d planned to do the same if I had to buy 10-round mags.

I received the magazine today.

Pictures are below. The 12-round mag with the pinky extension is depicted on the left, while the 10-round mag with the flat base plate is on the right. Notice the indented areas on the 10-round mag. That is what is limiting the magazine to a maximum of 10 rounds.

I was able to use a dremel to grind down the bumps that limit the capacity of the magazine. I then tested the magazine by loading it with snap caps. I was able to load 12 of them (max).

For those that might shun such a modification, the magazine already has ammo witness holes, as well at mag catch holes, as well as two round holes along it’s spine. Grinding the limiters isn’t going to cause any type of feed issue if you’ve not left irregularities after you’ve removed those bumps. I also really just wanted extra mags for range use. As I use the mag at the range, if I’ve not noticed any issues with using it after I’ve modified it, I’ll probably decide to use it for carry as well.