I posted that I bought a Tisas 1911 Carry DS.
The Tisas 1911 Carry DS product page is here.
For some reason, I had a difficult time obtaining this gun.
First, I should’ve bought it from a different seller. The place I purchased it has a spotty customer service reputation and many folks that have purchase things from them have had bad experiences.
Second, the gun took a day to ship, as the seller created the pickup slip after the mail had been picked up for that day, so the package waited another day before USPS picked it up. USPS picked it up on Tuesday.
It was delivered to the my choice of gun store on Thursday, at 1:30 PM. The gun store sat on it until Friday (WTF). They texted me Friday morning (a bit after 10 AM) saying that the gun was ready and that I could come pick it up.
I went to pick it up at 11:30 AM. It took me 15 minutes to get there and then 15 minutes to complete the background check paperwork (I had to redo one form and redid another form two times). I gave the cashier my state ID and concealed carry license.
Now, normally, there’s maybe a 5-10 minute wait for me and then they tell me that the I passed the background check. I ended up waiting 40 minutes. I wanted to leave and thought that they’d call me when it was approved, but I didn’t want to do the paperwork over again (if I couldn’t come back until the next day) and didn’t want to be on the way home just for them to call me back in (or call me after I’ve arrived back at home). They called me just before I walked out.
WTF. It was a little bit busy, but I know damned well that I don’t have any dirt in my background. I’ve used this location two other times, and didn’t have to wait that long during those times. It was busy but it wasn’t 40 min delay busy. Either NICS had issues with their systems or maybe NICS itself was having a super busy day.
It was fucking odd waiting that long. I was running out of things to look at in the store. I almost asked what took so long, but I was so flustered, I knew I was going to pop off, so I just shut the hell up so that I could leave as quickly as possible. Also, their damned FFL transfer fee went up (it’s now $45…that’s kinda high around here). I was unaware until it was time to pay. Again, I just wanted to leave, so I didn’t say anything.
This place is an odd gun store. I’ve never liked using them for firearms transfers but they were close to home and my choices were limited (or so I thought). I asked some folks on Reddit about this place and apparently, they’re the d-bags of the local gun stores (I’m not sure what defines d-bag here). I’ve never had issues or conflicts with the staff there, but I swear, there’s something “off” about the place.
So, I will never visit that store again. There are other stores I can use to buy things. For firearms transfers, I found out from a Reddit user that my range (I’m a member) charges $15 for transfers, for members. I could’ve used them the past 3 firearms I purchased!! What’s cool is that I could have a gun transferred there (or buy one there) and then immediately go shoot it!
So, after I got in my car, I THEN checked the firearm. Yeah, they didn’t let me check it before I did the FFL paperwork, which is bad – the reason most GOOD places let you check the gun before you do the paperwork is because the paperwork seals the deal and if the gun is broken or is missing parts (like a magazine), you can decline the transfer because there’s something wrong with the product you bought. Of the three guns I had transferred there, they only let me check one of those three and that one check was after the paperwork was completed and after I’d paid for the transfer.
I checked to see if the gun was present and that I had the two mags that came with the gun. Then I closed the box and drove home.
I got home and looked at the gun. This gun is nicer than folks will expect. A lot of guys keep insisting that, since the gun is a budget (very budget priced) 2011-patterned 1911, there has to be something wrong with it, like shoddy workmanship of the gun, tolerance issues, etc.
The gun is a $900 gun (MSRP) that I bought for $700 (street price). It feels like (at very least) a $900 gun.
Fitment is good, not great, but again, it’s a $900 1911/2011. It’s also not bull-barreled, so fitment isn’t going to be as tight as a bull-barreled gun would (generally, bull barrel guns have better slide to frame fitment).
Finish is good – it’s not cerakoted…I believe the finish is akin to Melonite (or actually is).
It came with two mags. Most of the latest budget 2011s have been coming with one mag. Two mags are certainly better than one. The mags are Checkmate mags, which are Staccato-patterned. They are good mags (at least $65-70 each).
The sights are good and are dovetailed. I believe the front is Novak-styled (not actual Novak patterned, though). Tisas has been pinning the front sight up until recently. The rear is Glock-patterned, which is great and means there are MANY replacement options. As well, if you decide to use an optic, you don’t lose the rear sight when the optics cut plate is removed. The rears will cowitness 1/3rd! As they are, the sights offer a great sight picture. The rear offers a semi-wide rounded U-notch and the front sight is a contrast white dot.
The optics cut is patterned for RMSc, which means I can continue to run a Holosun. The optic mounts directly to the cut (no adapter plate is needed).
The gun has a titanium firing pin, which is great.
The grip is nice. It is easily nicer than the grip on my SAS II UL. What’s nicer? It has front strap checkering, even on the polymer grip module. The side texturing feels like it will be sufficient for shooting, while also not being overly aggressive in texture. I saw someone say they thought it felt cheap. That same guy owns a SAS II UL – THAT gun’s grip feels cheap and it’s an $1600 2011!
The trigger’s shoe is polymer, but there are high end 2011s with polymer trigger shoes (Staccato and Springfield Armory Emissary guns come to mind). The trigger is also not all that light (but not heavy either). I assessed the trigger twice – an average of 5 trigger pulls netted a first average of 4 lb 13 oz. The second group of pulls averaged out to 5 lb 1 oz. 5 lbs isn’t heavy but it isn’t light, either. The perfect weight for me would be high 3s and low 4s. The trigger wall is pretty firm, though.
I field stripped it (I also removed the firing pin), and checked each part. There are some tool marks, but it doesn’t have super ugly marks like the LFA Apollo 11 or the EAA Girsan Witness 2311 guns. This gun is MIM-less. There is not a single MIM part in this gun. My Tisas Duty single stacked 1911 that I bought 2 years ago has some MIM – you can clearly see the cast lines and stamps on those parts.
The plan is to take it to the range tomorrow (or more like, today, as it is 2:30 AM right now).
I may even carry this gun, as it doesn’t feel big to me and fits in all of my 1911 holsers (those that accept railed 1911s, at least). I can conceal the grip well, too.
So far, there isn’t much to not like about the gun. In fact, I currently have no dislikes.
If Tisas does an Officer sized 2011, I’m going to buy it…there’s no question. If they follow the same recipe that they used with the Carry, a smaller 2011 is going to be an instant hit.
I’m currently working on capturing video footage for the gun that I will eventually share on YouTube.