Categories
1911 2011 Bul Armory feed issues limp-wrist SAS II Ultralight youtube

My Last YouTube Video…

…hit a nerve with at least one guy.

He tells me, “don’t tell me it’s not the gun,” and to “stop that nonsense,” whatever that means.

I’d basically said that most folks having feed issues with the gun haven’t checked (nor care to check) to see if it’s them (the shooter) and not the gun itself. The very first thing folks should always do is to ensure that they’re not limp-wristing.

Suggesting that folks may be limp-wristing their guns almost always offends them, which is kinda wild. Folks act as if they are infallible? Why? The typical reasons folks get offended is because they think that they’re masters of shooting after shooting X amount of years.

This particular commenter said that he doesn’t have issues shooting his micro-compacts. He mentioned that he has a P365 Macro, Hellcat and Shield Plus and doesn’t have feed issues. I told him that you can shoot one gun (or even several small guns) well and still have an issue with recoil management with another small gun, because they all have different grip textures and grip lengths, and each person’s hands on this Earth are going to differ. I also said that some guns are more sensitive to limp-wristing than others, too. Some guns will flat-out not tolerate limp-wristing.

This guy also didn’t say how many rounds he’d shot through his SAS II UL, nor how many mags he had. He didn’t say what ammo he was shooting through it, either. There are MANY variables that can contribute to feeding issues, but limp-wristing is the big one.

Factoring out limp-wristing, the next thing to troubleshoot would be the magazines. I’ve four magazines. I’ve NO feed issues whatsoever. I’ve shot a shitload of different types of ammo through the gun, but I’ve not had any misfeed trends.

The commenter could actually be experiencing an issue with both mags (I’m assuming he has two since he stated he’d just bought the gun two weeks prior), but, as I already stated, he didn’t supply any other data – he mostly gave me salt. I also asked him to supply a video so that everyone could see it. That was ignored. He also left a second separate comment saying that Bul Armory is paying me to say what I did, which is stupid. I used straight-up logic to explain it all (and I explain the logic below)…it’s not something that Bul Armory needs to tell anyone. If someone shoots the gun that you’re complaining won’t feed properly and they can’t generate those same misfeeds, logic dictates that you may be the issue.

There’s been numerous Reddit posts showing videos of Bul Armory gunsmiths shooting guns that were returned to them and the guns not having issues. I’ve seen some videos where guns go through a full magazine without feed issues. I’ve seen videos where guns go through two mags without feed issues. The gunsmiths use the customer’s mags when shooting, as well. The gunsmiths send the guns back to the owners and the owners shoot the guns, generating feed issues. In all cases, the gunsmiths send the ammo they were using back to the customer, so when the customer tests, they’re using the same ammo as the gunsmiths were. This tells me that there could be an issue with limp-wristing, especially if the gunsmith can’t replicate the misfeeds.

The gun is small – it is closer to 3″ than 3.25″. It is light. It’s a known fact that Officer-sized 1911s tend to have more issues than larger-sized 1911s. The gun could be faulty, yes, BUT I believe shooters should always try to ensure that they are not generating the issues.

I explained in my video that I’d run into a similar problem with a particular 1911 and was about to sell the gun. I kept thinking that the issue could be me – there was like a very small percentage of doubt that I was causing the issue, so I started forcing myself to troubleshoot both the gun and myself. I shot a lot of ammo through the gun, even when it was failing to feed. The gun didn’t have a ton of ammo shot through it, so I didn’t think it needed another recoil spring, but I ordered a new one anyways. I bought new grip panels, too. The misfeeds lessened but didn’t stop. I then decided to wear a helmet camera and record one hour of range shooting. When I got home and checked the footage, I was shocked. I was very loosely controlling the gun and it was plainly viewable. The next time I visited, I focused on my grip discipline and I didn’t have a single misfeed.

In my opinion, if you’re not humbly checking yourself, you’re setting yourself up for problems. I don’t have an issue letting folks know that when they have feeding issues, the shooter could be the issue.

The video is here:

Categories
1911 bull barrel paper clip Rock Island Armory Sootch00 youtube

Got a Rock Island Armory 1911 and Hate Using Paper Clips?

If you hate using a paper clip to break down your bull-barreled Rock Island Armory 1911, then this video might be of assistance to you.

My 9mm Tactical II (non-railed 9mm 1911) is bull-barreled and requires a paper clip when field stripping the gun (per the operator manual).  My 22TCM Ultra does not, and it comes with a 9mm barrel (not a bull barrel, though).

I’ve not tried the method in the video yet, but using the paper clip isn’t a huge deal for me.

Categories
2.0 Alien Gear Cloak Tuck cracked durability liner review video youtube

Alien Gear Cloak Tuck 2.0 – Durability Issue

I posted about my Alien Gear Cloak Tuck 2.0 purchase back on April 3rd.

Well, four months and a few days later, I’ve noticed that the inner plastic lining has cracked and is making some noise when it flexes. After only four months of occasional wear (I do not carry daily, but maybe 4 out of 7 days in the week). I bought two of them, each with a different shell, but I only use the one I bought for my Springfield. I supposed if it really bugs me, I can swap the XD shell to the non-cracked holster, but that’s just robbing Peter to pay Paul.

I should contact Alien Gear to see if they can replace the liner with their new steel material. Or, I can just order a new set of the 3.0 version. Or, I can go with another holster maker.  :/

UPDATE:

Here’s a 4 month review video:

I  ended up ordering a new 3.0 holster base to replace this one.  I did not want to end up having to send the cracked one back to Alien Gear and not being able to carry while waiting for them to ship me new one.

I also ended up ordering two new holsters of the 3.0 variant, for my P320C and Glock 19.  Additionally, I ordered an extra shell for my 22TCM (railed) 1911.

Categories
2A attitudes guns negligent video youtube

Negligent Folks with Guns when Watching YouTube Videos

I thought I’d share something I saw today.

When I was viewing YouTube videos, I saw something rather disturbing .  A guy was capturing video footage of his new guy, a Rock Island Armory 1911 10mm.  The guy cleared his weapon, but had his finger within the trigger guard and the finger looked to be bent around the trigger.  He’d removed the magazine but hadn’t yet cleared out the chambered round…his finger was resting on the trigger for quite awhile.  I immediately stopped watching the video…it was that disturbing.

EDIT:  The original video is here — https://youtu.be/VLcFmNV4ZHw?t=30s

UPDATE (12/14/2023): The above-linked video is no longer available. I’m glad I recorded it (below).

I went to the video’s comments section to see if anyone else complained to see if anyone else noticed.  Someone had and was tactful in mentioning it.

The author blew it off:

It is so sad that someone takes crucial criticism so casually.  What he said was, he has enough trigger control to not negligently discharge the gun, even with his finger resting on the trigger while fumbling around with the gun (as well, 1911 triggers are sensitive as hell).  I mean, I pointed it out with the cursor in the above video…it doesn’t get any more plain than that.  He was rather condescending in his reply.  This fool is either going to injure/kill himself, or even worse, he’s going to end up killing some innocent bystander.