Categories
1911 2011 Bul Armory feed issues limp-wrist SAS II Ultralight youtube

My Last YouTube Video…

…hit a nerve with at least one guy.

He tells me, “don’t tell me it’s not the gun,” and to “stop that nonsense,” whatever that means.

I’d basically said that most folks having feed issues with the gun haven’t checked (nor care to check) to see if it’s them (the shooter) and not the gun itself. The very first thing folks should always do is to ensure that they’re not limp-wristing.

Suggesting that folks may be limp-wristing their guns almost always offends them, which is kinda wild. Folks act as if they are infallible? Why? The typical reasons folks get offended is because they think that they’re masters of shooting after shooting X amount of years.

This particular commenter said that he doesn’t have issues shooting his micro-compacts. He mentioned that he has a P365 Macro, Hellcat and Shield Plus and doesn’t have feed issues. I told him that you can shoot one gun (or even several small guns) well and still have an issue with recoil management with another small gun, because they all have different grip textures and grip lengths, and each person’s hands on this Earth are going to differ. I also said that some guns are more sensitive to limp-wristing than others, too. Some guns will flat-out not tolerate limp-wristing.

This guy also didn’t say how many rounds he’d shot through his SAS II UL, nor how many mags he had. He didn’t say what ammo he was shooting through it, either. There are MANY variables that can contribute to feeding issues, but limp-wristing is the big one.

Factoring out limp-wristing, the next thing to troubleshoot would be the magazines. I’ve four magazines. I’ve NO feed issues whatsoever. I’ve shot a shitload of different types of ammo through the gun, but I’ve not had any misfeed trends.

The commenter could actually be experiencing an issue with both mags (I’m assuming he has two since he stated he’d just bought the gun two weeks prior), but, as I already stated, he didn’t supply any other data – he mostly gave me salt. I also asked him to supply a video so that everyone could see it. That was ignored. He also left a second separate comment saying that Bul Armory is paying me to say what I did, which is stupid. I used straight-up logic to explain it all (and I explain the logic below)…it’s not something that Bul Armory needs to tell anyone. If someone shoots the gun that you’re complaining won’t feed properly and they can’t generate those same misfeeds, logic dictates that you may be the issue.

There’s been numerous Reddit posts showing videos of Bul Armory gunsmiths shooting guns that were returned to them and the guns not having issues. I’ve seen some videos where guns go through a full magazine without feed issues. I’ve seen videos where guns go through two mags without feed issues. The gunsmiths use the customer’s mags when shooting, as well. The gunsmiths send the guns back to the owners and the owners shoot the guns, generating feed issues. In all cases, the gunsmiths send the ammo they were using back to the customer, so when the customer tests, they’re using the same ammo as the gunsmiths were. This tells me that there could be an issue with limp-wristing, especially if the gunsmith can’t replicate the misfeeds.

The gun is small – it is closer to 3″ than 3.25″. It is light. It’s a known fact that Officer-sized 1911s tend to have more issues than larger-sized 1911s. The gun could be faulty, yes, BUT I believe shooters should always try to ensure that they are not generating the issues.

I explained in my video that I’d run into a similar problem with a particular 1911 and was about to sell the gun. I kept thinking that the issue could be me – there was like a very small percentage of doubt that I was causing the issue, so I started forcing myself to troubleshoot both the gun and myself. I shot a lot of ammo through the gun, even when it was failing to feed. The gun didn’t have a ton of ammo shot through it, so I didn’t think it needed another recoil spring, but I ordered a new one anyways. I bought new grip panels, too. The misfeeds lessened but didn’t stop. I then decided to wear a helmet camera and record one hour of range shooting. When I got home and checked the footage, I was shocked. I was very loosely controlling the gun and it was plainly viewable. The next time I visited, I focused on my grip discipline and I didn’t have a single misfeed.

In my opinion, if you’re not humbly checking yourself, you’re setting yourself up for problems. I don’t have an issue letting folks know that when they have feeding issues, the shooter could be the issue.

The video is here:

Categories
AK-63DS AMD-63 Croatia feed issues Hungarian jam magazines steel

Recent AMD-63 Range Visits and Issues with Croation Magazines

For brevity, below are my range notes from today’s range visit.  I also visited last week:

Had issues today.  The new Croatian mags will not work in the AK-63D/AMD-63.  They will not feed ammo into the firearm.  At all.  Two of them won’t strip ammo from the mag and two jammed when trying.  Luckily, I had one of the Atlantic Firearms mags with me (they are new also)…it fed and fired without a hitch, so I had to use this one mag during my session, stripping out ammo from the non-functional mags and reloading that ammo into the functional mag.  It took a bit of time and I only had an hour (range was packed, too).

When I got home, I tried to see if the SAM7 would load ammo from the Croatian mags.  It would.  It seems the AK-63D/AMD-63 does not like the Croatian mags, even after I fixed them so that they’d latch into the mag well (before that, they wouldn’t even latch).
The firearm never got hot because I only fired 49 rounds from it.

I also had to readjust the front sight because I was hitting very low.  To raise the POI, I had to lower the front sight post.

I’m hitting low left still, which indicates I’m flinching.
The fired brass is dinged at the opening lip on a lot of the spent cases.  As well, there’s brass dings on the outside of the ejection port.

Need to open up the firearm to check to see how the bolt carrier tang is.  Also need to check the front trunnion and bolt for wear.

Also, I experienced some trigger slap…stings a bit.

Additionally, I shot the last mag standing up.  I was able to put the majority of the 15 rounds in the middle of the paper (there were two flyers).  I think if I keep practicing shooting while standing, I can get the hang of it, if I lean forward and keep the stock planted deep in my shoulder pocket.

I may need to get a new rear sight…this one is difficult to see, which affects front/rear sight alignment.  It’s difficult for me to hit where I’m aiming if I can’t properly align the sights.

There’s 171 rounds through the AMD-63 now.  I brought close to 200 rounds with me but only fired 49 due to magazine issues (mentioned above in the range notes).  Plus, I only had an hour to work with and the range was crowded tonight.  Will try again tomorrow (and not use the Croatian mags when I do).

Some pics of the rifle’s internals:

I’ve an BG-AK lower handgrip coming (these are back in stock as of now).  This was on my wish list.  I also have a Zhukov stock on my list, as well as a rail that would fit where the rear sight resides (for the SAM7UF).

I also have 1000 rounds of Red Army Standard FMJBT on the way (lead core).

I’ll post again after my next range visit (which may be tomorrow).