I wanted a place to discuss my handguns and firearms in general. Everyone seemingly has lots to say about guns, so I promise you this won't be a rant blog.
I’ve been to the range twice with the Tisas Carry DS9.
I’ll share some information about the first range visit. I also suspected some of the things we discussed in my last post would be apparent during the first range visit.
The trigger had issues. The gun initially had a thick walled trigger. While the trigger itself wasn’t heavy, it wasn’t light either, so that’s a wash. The trigger wall was stiff, but I shot maybe 130 rounds from the gun, so the wall softened a bit. As well, the trigger is now lighter by 1 lb.
Between the trigger’s issues and the sights, I was having issues hitting where I aimed. I shot low (90 degrees low) with every shot — not low left, but directly low. I’m not sure how to use the U-notch sights, but I’m thinking they’re off by a bit, at least.
The gun didn’t hiccup at all during the first range visit. I shot a mix of ammo, some being HP, some being SD HP, and some being FMJ. The gun is flat-shooting, too.
When I got home from the first range visit, I sat while watching TV and kept racking the gun and pulling the trigger to get that thick wall to wear-in as quickly as possible.
When I went to the range next (two days later), I shot 187 rounds. Quite a bit of ammo was shot, some HP, some SD ammo, and a lot of range ammo. I had one fail to feed one one HP (I think it was Winchester range JHP). I put it back in the magazine and it feed and shot successfully.
The gun also shot a lot better, probably due to the trigger breaking in. Also, I man-handled the gun, as the first range visit, I was sloppy with gun control (recoil management and probably trigger control). My grouping were MUCH better this range visit.
I now have 317 rounds through the gun. The gun has yet to be cleaned, which says a lot, because I’ve looked in the gun and it’s pretty filthy. The rails were overly lubricated, which may have helped. I may clean it tomorrow, as I’m not intentionally trying to induce filth-related failures.
I also published a video. I’ll be producing a longer duration video soon. The short duration one below lacks some information (I had to make it fit into a 15 minute timeframe).
For some reason, I had a difficult time obtaining this gun.
First, I should’ve bought it from a different seller. The place I purchased it has a spotty customer service reputation and many folks that have purchase things from them have had bad experiences.
Second, the gun took a day to ship, as the seller created the pickup slip after the mail had been picked up for that day, so the package waited another day before USPS picked it up. USPS picked it up on Tuesday.
It was delivered to the my choice of gun store on Thursday, at 1:30 PM. The gun store sat on it until Friday (WTF). They texted me Friday morning (a bit after 10 AM) saying that the gun was ready and that I could come pick it up.
I went to pick it up at 11:30 AM. It took me 15 minutes to get there and then 15 minutes to complete the background check paperwork (I had to redo one form and redid another form two times). I gave the cashier my state ID and concealed carry license.
Now, normally, there’s maybe a 5-10 minute wait for me and then they tell me that the I passed the background check. I ended up waiting 40 minutes. I wanted to leave and thought that they’d call me when it was approved, but I didn’t want to do the paperwork over again (if I couldn’t come back until the next day) and didn’t want to be on the way home just for them to call me back in (or call me after I’ve arrived back at home). They called me just before I walked out.
WTF. It was a little bit busy, but I know damned well that I don’t have any dirt in my background. I’ve used this location two other times, and didn’t have to wait that long during those times. It was busy but it wasn’t 40 min delay busy. Either NICS had issues with their systems or maybe NICS itself was having a super busy day.
It was fucking odd waiting that long. I was running out of things to look at in the store. I almost asked what took so long, but I was so flustered, I knew I was going to pop off, so I just shut the hell up so that I could leave as quickly as possible. Also, their damned FFL transfer fee went up (it’s now $45…that’s kinda high around here). I was unaware until it was time to pay. Again, I just wanted to leave, so I didn’t say anything.
This place is an odd gun store. I’ve never liked using them for firearms transfers but they were close to home and my choices were limited (or so I thought). I asked some folks on Reddit about this place and apparently, they’re the d-bags of the local gun stores (I’m not sure what defines d-bag here). I’ve never had issues or conflicts with the staff there, but I swear, there’s something “off” about the place.
So, I will never visit that store again. There are other stores I can use to buy things. For firearms transfers, I found out from a Reddit user that my range (I’m a member) charges $15 for transfers, for members. I could’ve used them the past 3 firearms I purchased!! What’s cool is that I could have a gun transferred there (or buy one there) and then immediately go shoot it!
So, after I got in my car, I THEN checked the firearm. Yeah, they didn’t let me check it before I did the FFL paperwork, which is bad – the reason most GOOD places let you check the gun before you do the paperwork is because the paperwork seals the deal and if the gun is broken or is missing parts (like a magazine), you can decline the transfer because there’s something wrong with the product you bought. Of the three guns I had transferred there, they only let me check one of those three and that one check was after the paperwork was completed and after I’d paid for the transfer.
I checked to see if the gun was present and that I had the two mags that came with the gun. Then I closed the box and drove home.
I got home and looked at the gun. This gun is nicer than folks will expect. A lot of guys keep insisting that, since the gun is a budget (very budget priced) 2011-patterned 1911, there has to be something wrong with it, like shoddy workmanship of the gun, tolerance issues, etc.
The gun is a $900 gun (MSRP) that I bought for $700 (street price). It feels like (at very least) a $900 gun.
Fitment is good, not great, but again, it’s a $900 1911/2011. It’s also not bull-barreled, so fitment isn’t going to be as tight as a bull-barreled gun would (generally, bull barrel guns have better slide to frame fitment).
Finish is good – it’s not cerakoted…I believe the finish is akin to Melonite (or actually is).
It came with two mags. Most of the latest budget 2011s have been coming with one mag. Two mags are certainly better than one. The mags are Checkmate mags, which are Staccato-patterned. They are good mags (at least $65-70 each).
The sights are good and are dovetailed. I believe the front is Novak-styled (not actual Novak patterned, though). Tisas has been pinning the front sight up until recently. The rear is Glock-patterned, which is great and means there are MANY replacement options. As well, if you decide to use an optic, you don’t lose the rear sight when the optics cut plate is removed. The rears will cowitness 1/3rd! As they are, the sights offer a great sight picture. The rear offers a semi-wide rounded U-notch and the front sight is a contrast white dot.
The optics cut is patterned for RMSc, which means I can continue to run a Holosun. The optic mounts directly to the cut (no adapter plate is needed).
The gun has a titanium firing pin, which is great.
The grip is nice. It is easily nicer than the grip on my SAS II UL. What’s nicer? It has front strap checkering, even on the polymer grip module. The side texturing feels like it will be sufficient for shooting, while also not being overly aggressive in texture. I saw someone say they thought it felt cheap. That same guy owns a SAS II UL – THAT gun’s grip feels cheap and it’s an $1600 2011!
The trigger’s shoe is polymer, but there are high end 2011s with polymer trigger shoes (Staccato and Springfield Armory Emissary guns come to mind). The trigger is also not all that light (but not heavy either). I assessed the trigger twice – an average of 5 trigger pulls netted a first average of 4 lb 13 oz. The second group of pulls averaged out to 5 lb 1 oz. 5 lbs isn’t heavy but it isn’t light, either. The perfect weight for me would be high 3s and low 4s. The trigger wall is pretty firm, though.
I field stripped it (I also removed the firing pin), and checked each part. There are some tool marks, but it doesn’t have super ugly marks like the LFA Apollo 11 or the EAA Girsan Witness 2311 guns. This gun is MIM-less. There is not a single MIM part in this gun. My Tisas Duty single stacked 1911 that I bought 2 years ago has some MIM – you can clearly see the cast lines and stamps on those parts.
The plan is to take it to the range tomorrow (or more like, today, as it is 2:30 AM right now).
I may even carry this gun, as it doesn’t feel big to me and fits in all of my 1911 holsers (those that accept railed 1911s, at least). I can conceal the grip well, too.
So far, there isn’t much to not like about the gun. In fact, I currently have no dislikes.
If Tisas does an Officer sized 2011, I’m going to buy it…there’s no question. If they follow the same recipe that they used with the Carry, a smaller 2011 is going to be an instant hit.
I’m currently working on capturing video footage for the gun that I will eventually share on YouTube.
It is almost 1 o’clock AM and I was viewing availability of the new Tisas double stack 1911s. I was watching to see if I could find low priced variants, and also was waiting to see reviews of them – there are not all that many, currently. I did not intend to purchase until I noticed that the prices were creeping upward. As well, most places that had them earily in the week had sold out. I decided to buy now.
I bought a black Carry model. I’d been studying the Duty variant but none of those have been available…I can get one of those later, if need be. I was also looking at the MAC DS varaint, but didn’t feel like spending $900 on a 1911 (even though that price is below MSRP).
Note that the Tisas will be MIM-less (all but the recoil spring plug). Also, the gun comes with 2 mags. As well, the gun is optics-ready and the cover plate does not have the rear sight attached (which is great).
I’m excited about this gun, as it will be my second legit 2011. I saw some Prodigys that were marked way down from MSRP, but those were still $1100. I also looked at Apollo 11. This gun also undercuts the LFA Apollo 11 by a fair margin ($300) and comes with an extra mag, as well as having no MIM.
I’m happy with my single stacked Tisas and know they’re reliable, so I decided to give their 2011 a try.
This time, I bought from TheGunDock.com, mainly due to their lower pricing.
As with every gun purchase, I’ll document my journey with this gun.
UPDATE (2/10/2024): I waited two days for the gun to ship, but my FFL hasn’t yet sent it’s FFL information to the place I purchased the gun. They sent it to me by mistake. The gun store requires the FFL to send the info, not the person buying the gun. Until my FFL can follow the process, shipping won’t occur. I asked them to resend the info again, but it was late in the afternoon and I don’t think they saw my email. I may get the gun by the end of next week, IF my FFL clears up their mistake either tomorrow or Monday.
