Author: RS

Categories
1911 2011 double-stack Tisas

I Purchased A Tisas Double Stack 1911!

This is my annual purchase for 2024!

I mentioned not long ago that Tisas is now making double stacked 1911s. I also have documented my journey with the Tisas Duty BR45 that I bought 2 years ago.

It is almost 1 o’clock AM and I was viewing availability of the new Tisas double stack 1911s. I was watching to see if I could find low priced variants, and also was waiting to see reviews of them – there are not all that many, currently. I did not intend to purchase until I noticed that the prices were creeping upward. As well, most places that had them earily in the week had sold out. I decided to buy now.

I bought a black Carry model. I’d been studying the Duty variant but none of those have been available…I can get one of those later, if need be. I was also looking at the MAC DS varaint, but didn’t feel like spending $900 on a 1911 (even though that price is below MSRP).

Note that the Tisas will be MIM-less (all but the recoil spring plug). Also, the gun comes with 2 mags. As well, the gun is optics-ready and the cover plate does not have the rear sight attached (which is great).

I’m excited about this gun, as it will be my second legit 2011. I saw some Prodigys that were marked way down from MSRP, but those were still $1100. I also looked at Apollo 11. This gun also undercuts the LFA Apollo 11 by a fair margin ($300) and comes with an extra mag, as well as having no MIM.

I’m happy with my single stacked Tisas and know they’re reliable, so I decided to give their 2011 a try.

This time, I bought from TheGunDock.com, mainly due to their lower pricing.

As with every gun purchase, I’ll document my journey with this gun.

UPDATE (2/10/2024): I waited two days for the gun to ship, but my FFL hasn’t yet sent it’s FFL information to the place I purchased the gun. They sent it to me by mistake. The gun store requires the FFL to send the info, not the person buying the gun. Until my FFL can follow the process, shipping won’t occur. I asked them to resend the info again, but it was late in the afternoon and I don’t think they saw my email. I may get the gun by the end of next week, IF my FFL clears up their mistake either tomorrow or Monday.

Categories
2011 9mm Tisas

Tisas is Now Producing 2011s!

So, I was checking Reddit today and saw a post that Tisas had listed a double-stacked 1911 on their website product list. Within an hour, there were like 5-6 other posts (in the r/1911 subreddit).

I decided to check the product page and was shocked. I thought they’d produced a Para-patterned 1911, but they actually produced THREE (3) 2011-patterned 1911s. They producted a 5″ variant, a 4.25″ variant, and a 5″ variant of their Night Stalker SF.

Not only that, but typical recent budget 2011s offer optics cuts that remove the rear sights. The Tisas variants will allow the rear sights to stay in place when using an optic. They’re also using 1/3rd co-witness of the rear sight through the mounted optic.

What’s the difference between Para- and 2011-patterned handguns? Para-patterned guns have the grips a permanent part of the frame. The frame and grip are one piece. 2011-patterened handguns have modular polymer grips that are separate from the frame. Many folks confuse Para-patterned double-stacked 1911s as 2011s, when there’s a distinctive difference.

Anyways, here are two videos: one of the 5″ Duty DS and the other of the 4.25″ Carry DS.

UPDATE (2/8/2024): I’ve removed the YouTube videos from this post, as the publisher marked them as private. It’s a bit annoying, because the publisher was Tisas.

Categories
Bul Armory fail to feed FMJ FTF range report SAS II Ultralight

SAS II UL Range and Progress Report for 10/2023

I’m currently very near to crossing over the 1,000 round threshold with the Bul Armory SAS II Ultralight.

I visited the range a few days ago, bringing 200 rounds of ammo. I ran out of range time before I was able to shoot it all. I visited after work since I’ve to be at work every Wednesday now. I may make this my range day every Wednesday since my work isn’t far from XCal.

While I was waiting in line for a lane assignment, I happened to see some of the range’s rental selection. They’ve Staccatos, as well as several really nice 1911s. What I really want is to try the G43X and G48 (I may be purchasing one of those next year). I didn’t see those guns in their rental section but their rental section is very large and I’m sure they’ve a good selection of Glock rentals. I’ll check next time I go. I also wanted to try their P365, since I’ve seen more than one person asking, “Why buy a SAS II UL when a P365 is better?” In my opinion, that’s a rather lame comment since most folks aren’t cross-shopping those two guns (due to price as well as platform — both of those being quite different frome one another). Yeah, a P365 will conceal better, but P365s are also more difficult to shoot quickly and accurately. The SAS II UL has a bigger grip than the P365, but that doesn’t mean that an owner will have issues concealing a UL. The UL will almost certainly be less snappy and quicker to shoot. It’ll probably outshoot the G43X, too.

I shot 187 rounds of the 200 that I broght with me. Most of it was Fiocchi 115-gr FMJ, although some of it was Blazer 124-gr FMJ and Remington 124-gr FMJ. That puts me at 986 rounds through the SAS II UL, thus far.

I had 6 fails to feed (FTF) prior to the pistol course I attended a few weeks ago. I had one FTF during that class and one at the range visit this week. The total FTF count is now 8. 8 of 986 is 0.81 — that is the current failure rate in percentage.

The prior percenage was 0.96, with 6 fails at 623 rounds (back in May 9, 2023). I had several range visits where I didn’t have any failures. This could be due to me learning how to better grip this handgun, as well as me not shooting as much JHP (which tends to be high pressured, which may induce limp-wristing).

Why do I report this as a percentage? So many folks look at failure counts as hard numbers. They want it to be zero. In my opinion, to expect no failures is an impossible ask. Sooner or later, a gun will fail, especially since failures can be induced by the shooter, as well as out-of-spec ammo. Some ammo will be in-spec but will have large hollowpoint projectiles (which do not meet a specification). I don’t think it is logical to expect a handgun to meet every single variation of ammo specification, as well as account for owner-induced failures. So, I post the round count and count of failures and then convert both to a percentage. Percentages have better meaning, IMO. It tells a better story than a raw number of failures.

I still need to purchase the targets that were used in the pistol course I attended (as well as the target stickers).

I’ll post some range footage as soon as I’ve cropped a few sections for viewing. I mainly shot at 7 and 10 yards, some at somewhat fast paces. I also tried to practice accuracy. I shot several times at 15 yards, too. I’m still struggling with grip. I keep readjusting my weak hand after a shot — I need to find a better way to stop doing this. I’m subconsciously doing that.

Categories
BATFE Firearms Advocacy Groups Firearms Policy Coalition (FPC) Guns of America (GoA) pistol brace

Fifth Circuit Once Again Rules Against the ATF’s Pistol Brace Ban, As a Final Rule

I just got a Youtube notification from the MrGunsNGear channel regarding the current state of the suit between plaintiffs and the ATF regarding the current pistol brace ban.

I’ll link the Youtube video below.

In the video’s description:

The Fifth Circuit has once again ruled against the ATF’s pistol brace ban / Final Rule for FPC and it’s members but the fight isn’t over.

Mrgunsngear – Guns ‘N Gear Reviews

If you’re a member of the FPC, a family member of the defendents that filed the suit, or a customer of Maxim Defense, you’re covered.

If you’re outside of those groups, then you currently are not covered, but expect those organizations to submit for coverage in the next few days.

Categories
1911 2011 AF1911-S15 Alpha Foxtrot ammo Bul Armory defensive ammo SAS II Ultralight training

Another 1911 Range Visit / Upcoming Training

Once again, I took the Alpha Foxtrot S15 to the range, as it exhibited some failures during my last range visit, which I believe I documented on this blog.

I also forced myself to shoot the SAS II UL this go-around, since I’ve been neglecting the gun (and I’m also carrying it).

I brought some of my open boxed SD ammo to test the S15, as I initially thought it was having issues due to bad ammo. Another culprit could have been the mag (there was one magazine in particular that was having issues). Another culprit could have been me – I’d shot the gun toward the end of the visit and I was probably getting tired (hand/wrist/arm fatigue).

Right off the bat, I got two fails to feed, with the suspect mag (I’ve marked it). I ended up stopping everything, emptying the mag of ammo, and putting the ammo in a different magazine. The failures stopped.

I’m thinking I might ask Shield Arms to replace this mag. The mag is new and should be covered by manufacturer’s warranty. It’s odd that the failures don’t always occur, though. The ammo it was choking on was Sig Sauer V-Crown 147-gr JHP.

It also failed once when shooting Remington Golden Saber 147-gr JHP. It ate 21 other Golden Sabers without issue, though.

Those were the only failures, so it wasn’t really all that bad this time around.

I’m at 623 rounds through the S15 now. The gun is uncannily accurate. It doesn’t seen to be as snappy as the SAS II UL, but it has better grip surfaces (by far). Now that I know that it’ll eat JHP without issue, and now that I’ve tested the mags, I can actually consider carrying this gun now, although I’ll keep testing it (I’m still wanting to carry the SAS II UL, too).

I’m at 661 rounds through the SAS II now. I shot 38 rounds tonight, all Herters Target 115-gr FMJ. There were no hiccups or failures. I shot all the ammo at 10 yards, quickly (since I’ve the optic installed).

I’ll be working on posting range video footage this weekend, of both guns. I have footage from the last visit but the settings were out of whack and the field of view wasn’t the best (the framing was off-center, as well).

Next week, I’ll be attending my first handgun course. The plan is to use my current carry gun (SAS II UL). I’ll be bringing my Glock 19 as a backup gun, in case they state my SAS II is too small and in case the SAS II has a breakage. I’ve other guns I can consider as backup guns but most of my guns are DA/SA and I’m more used to SAO nowadays. I’ve several striker fired duty- and compact-sized guns but I’ve no holsters for them (nor extra mags). At this point in time, the Glock 19 is my best option (I’ve extra mags and several holsters for it).

I plan to shoot Blazer 124-gr FMJ for the course (was told that I’d need 200 rounds, so I’ll buy 4 boxes of 50). Blazer is reliable for me, but so is the Herters Target, so I may buy that brand instead, although the Blazer is just a few dollars more.

I was planning on a rifle course too, but I need the time to purchase mags and magazine pouches that’ll fit my carry belt. I may have to wait until next year for that, although I can also take a rifle course by XCal. We’ll see.

Categories
9mm AF1911-S15 Alpha Foxtrot Grand Power limp-wrist P11

Summary of Range Session – 9/8/2023

I went to the range tonight because I wanted to work off some steam (been busy with work and have been stressing).

I’d been thinking about my Grand Power and recently had someone reach out to me on YouTube. She said that she has the P11 and that she’d been having the exact same issue (fails to return to battery, or FRTB), but that her husband didn’t have the issues when shooting it. She hinted that it may’ve been limp wristing that caused it.

I did a bit of research and it seems that limp wristing can cause FRTBs.

I never realized that I could’ve been limp wristing the gun. It is rather slick, with no significant texturing on the grip.

I decided to begin taking it to the range to see if I can shoot it without experiencing the FRTBs. I shot 50 (well, 48) rounds of Koenig 110-gr JHP Match through it tonight and I didn’t have any failures. Note that the gun is configured a bit differently since I last shot it — I’m using a small Hogue rubber grooved slip-on grip, which helped with getting control of the handgun. I was ensuring I had a strong grip on the gun. I’ll continue to bring it to the range, shooting 50-100 rounds from it when I can, and trying to practice good grip technique so that I’m accurate as well as not limp-wristing.

I also shot 155 rounds from the Alpha Foxtrot S15 1911. The ammo of the night for that gun was Herters Target 115-gr FMJ with a splash of Fiocchi 115-gr FMJ. Whereas I didn’t have any issues last range visit, I had 8 FTEs this range visit. I shot the same ammo last visit, as well.

The issues could be (possible solutions are below, in italics):

Bad magazine – I shot with all six mags and only one mag generated failures, so I kept shooting with it to see if I was limp-wristing and causing the failures. I shot many rounds through that mag tonight and there was only one time where I got thorugh a mag without failures. I marked the mag and will put it aside. The plan is to use the other mags next range visit – if the failures stop, then I’ll know that the mag is the problem.

Bad box of ammo – I bought 200 rounds of Herters (2 x 100-round boxes). I got through one box with only two fails to extract. The other box had five FTEs. The Fiocchi had one failure – not only did it the spent case not extract, but it was still fully in the chamber, and the slide did not lock back (it was the last round of the mag). Also, I noticed that the slide would sometimes seem to be moving a bit slower than normal after a round is fired, which is usually indicative of inconsistent amounts of powder within the case. As well, some of the ammo looked funky where the case crimps onto the projectile, as if the ammo had possible QC issues. I’ll bring some good JHP with me next range visit, to see if the issues still occur with good ammo.

Limp-wristing – I won’t count this out, since the FTEs started occurring mid session of my range visit. I tend to fatigue myself as I practice (this is normal). Next range visit, I’ll test the S15 (and the other 5 mags that didn’t have issues) before shooting any other guns.

I did have fun shooting the Grand Power again. I was accurate with it. I shot it once at 10 yards but the spread was wider than when I shoot the S15 at that range, which I initially thought was odd until I realized that the S15 has far better grip texturing. I ended up sticking with shooting at 7 yards.

The S15 is accurate AF! I spent a large amount of time shooting at 10 yards and was accurate. Not only that, there were times where I was shooting pretty fast and my groups were tight as I shot further out. And that was with irons. This gun is uncanny, but it’s really because of the front checkering on the grip. It’s going to seriously spoil me. I’m already thinking about selling all my other 1911s so that I can focus on 1911s and 2011s that have front checkering. Yes, I can get checkering added to my existing 1911s, but some gunsmiths won’t touch non-US guns and all guns that get checkering will need to be repainted/refinished.

I also now have just under 500 rounds through the S15. I’m slowly accumulating the round count on this gun. I’ve just under 1600 rounds through the GP P11.

Categories
1911 iron sights RIA Rock Island Armory Rock Ultra Tac Ultra

RIA Rock Ultra MS – Front Sight Fell Off

I’m not sure why I haven’t posted about this yet, but a few months ago (Jan/Feb timeframe) I was cleaning my RIA Rock Ultra MS and noticed that the front sight was very loose. I’m not sure what occurred to loosen it, but I’d been carrying that particular gun for a while and hadn’t noticed that issue until it happened.

I was carrying that handgun in a Tenicor kydex holster, but the kydex doesn’t touch the front sight. I do remember dropping the gun once, on a carpeted floor. I’m thinking that might have been enough to dislodge the front sight. I can’t remember how the gun landed, but if it landed on the front sight, that would explain why the sight was loose.

The front sight was loose enough to where it slid all the way out of the dovetail with very little effort. Not only that, but the dovetail edge was surgically sharp and sliced my finger badly (had an issue stopping the bleeding).

When I cleaned the slide of blood, I saw that it looked as if the only thing that kept the sight in place was red threadlocker. I could see old threadlocker on the bottom of the sight and in the dovetail. I’m almost certain RIA didn’t fit this sight to the dovetail, otherwise I wouldn’t have been able to slide it back on and off the slide.

I’ve ordered another sight (from Armscor) but do not have the tools needed to perform an installation (I’ve no vise, I’ve no files, I’ve no sight pusher).

I can either order the needed tools or give the slide and sight to a local gunsmith so that they can install it.

After I had the issue, I couldn’t carry the gun, but I ended up installing the 9mm barrel to my 22TCM RIA Tac Ultra so that I could carry that gun instead. That gun also fit in the Tenicor Certum holster.

Categories
1911 Canik handguns

Annual Gun Buy is Almost Here!

It’s almost time for my annual bonus. Every year, I get 1-2 firearms.

Shot Show 2023 exhibited a lot of promising guns this year!

Rock Island Armory (RIA) has released two new firearms – the BBR 3.10 1911 in 9mm and the LI380.

The BBR 3.10 still looks as if the grip was an afterthought. I’m not sure I’d like this gun even as a range toy. Yeah, the gun should be more manageable in 9mm (versus the 45ACP of the original 1911). This gun looks good but isn’t for me.

The LI380 is almost certainly a rebadged (or licensed copy) of the Bersa Thunder 380. I already have one of those, a Plus model.

I frequent the r/1911 subreddit group. Someone asked about a particular 1911 and posted a picture of the Fusion Firearms 1911 Riptide Carry. It is a Commander-sized (4.25″) 1911 that is bob-tailed and chambered in 10mm, 45ACP, or 9mm. It is blued with nice wood grip panels. It is made by a gunsmith that used to work at Dan Wesson. The gun goes for $800-$900. It looks NICE. I’m considering this gun in 9mm.

I’m also looking at the newly press-released Canik Mete MC9, which is a micro-compact polymer handgun that is very similar but smaller than the TP9 Elite SC. It usese the same mags as all of the other Canik handguns. I’m definitely getting this firearm, as it’s MSRP is $439 and I can use my Elite SC mags with it.

There’s also the Springfield Armory Prodigy DS, which is not only a double-stacked 1911, but is a legit 2011 (the grip being modular, which is typical of all 2011s). If I obtain this firearm, it will be the version that comes with the Hex Dragonfly optic. This firearm is in the $1500 range.

There’s also the EAA/Girsan 2311, a new 2011 offering and this handgun starts at $999! It is optics-ready, is a true 2011 (grip is modular), will come in 10mm, 9mm, and 45ACP, and will come in four barrel lengths. I’m leaning toward this firearm in 9mm.

There’s also the Dan Wesson TCP, which is a single stacked 1911 but is, well, a Dan Wesson. It has a rail and has a tri-topped slide. It has a gold bead front sight, too. These can be found in the $1500 range. I’m leaning towards the 9mm version of this handgun.

I’m also eyeing the Bul Armory SAS II 3.5″ Ultralight 1911, which can be found in the $1400 range.

What’s currently decided is that I’m getting the aforementioned Canik Mete MC9. I’m not sure which 1911 I’m going to get yet. It’s a toss up between the Bul Armory SAS II Ultralight, the Springfield Armory Prodigy DS with optic, the EAA/Girsan 2311, or the Dan Wesson TCP 9mm. I really really want a 2011 variant, so I suppose the Dan Wesson is out. Of the 2011 variants, the EAA will be unproven since it is their first offering, so I suppose that gun is factored out based on that fact. Of the Bul Armory and the Springfield Armory Prodigy DS, the Prodigy DS has been having reliability issues, so, I could factor out that gun from the choices, which leaves the Bul Armory as the most likely handgun of choice!

Now, if I get the Bul Armory, holsters will be problematic, as I’ve spent close to $200 on holsters for Commander-sized 2011s the past two months. Well, if I’m buying a $1500+ gun, another $100 for a good holster (Tenicor) is a drop in the bucket, IMO, so I guess I can either see if the SAS II will fit in my 4.25″ Tenicor holsters first, or just straight-up order a new one. We’ll see.

UPDATE: I’d decided on the SAS II but then started focusing on the sights – I don’t really care for them, especially since the rear sight has to be removed to use an optic. That’s a huge turn-off. I’ve also seen at least one review that complains that the SAS II UL is so light that it feels snappy. That could be a problem, as well. The Prodigy 4.25″ is better in that regard, but I’m betting the SAS II TAC doesn’t have the same aforementioned issue with the rear sight. Then I started thinking about the EAA Witness 2311 – it will come in 4 barrel lengths and is optics-ready, which means they’ll be selling a 3.5″ variant (no idea how small, but it’ll be in the 3″ range). They said all 9mm 2311s will carry 17 rounds, so I won’t be losing any ammo capacity if I go the EAA route. So, as of 1/28, I’m leaning toward the EAA Witness 2311, or Bul Armory SAS II TAC, or the Prodigy DS 4.25″.

UPDATE 2: Well, shit. There isn’t much info provided on the Witness 2311, but I looked at the press release page and saw that there’s at least two slide versions: with and without optics cuts. Also, the optics-ready version will remove the rear sight when using an optic. WTF is up with that trend? I’m at a loss on which to choose. I’ll probably wait a bit for EAA to add the Witness 2311 to their product list, since I know NOTHING about that firearm. For example, what’s it’s weight? It’s not going to be lighter than the SAS II Ultralight, that’s for sure (my guess is that it’ll weigh close to 2 lb).

UPDATE 3: While waiting for the annual bonus to be released, I’ve been conducting research on my potential choices. I continue to see complaints of the SAS II Ultralight being snappy, and since I hate snappy guns, I think I’m going to put the choice of Bul Armory aside. This sucks because recoil perception differs from person to person – I may find that I can handing the SAS II fine, but I’m not willing to risk getting one only to be disappointed. I’m now focused on the Alpha Foxtrot S15 1911 (not a true 2011-spec gun – it’s a doublestacked 1911) or the Dan Wesson TCP, in that order. Following those two choices is the Fusion Firearms Riptide C. Why did the EAA Witness 2311 get bumped down? I have yet to see anything from EAA on the gun, other than what they showed during Shot Show 2023 and the pre-release details of that gun that they released back in December. So, as of 2/12, it’s the Alpha Foxtrot S15 as the gun of choice, unless I find any information that disqualifies it, then it will be the Dan Wesson TCP in 9mm.

UPDATE 4 (LOL): I’ve just discovered that the EAA Witness 2311 will be released to consumers in April 2023. So, with that being said, the Witness is back in the hunt. I’m thinking I’ll just stay with the Alpha Foxtrot, and get the Witness next year. Or, get the Witness this year and wait for the Alpha Foxtrot next year. I could get both in one shot but if I’m going to do that, I may as well get a Staccato 2011, but I’m not buying a $2K+ handgun…I can afford it but spending that much money on any handgun is fucking ridiculous, in my opinion.

Categories
1911 AIWB appendix holster

The Tenicor Certum 3 has arrived!

I may need to fine-tune the position placement, but the Certum 3 appears to wear better than the Velo 4. I’m not sure if that’s a fair thing to say, because the Certum does offer a lot more adjustment than the Velo. I have it canted maybe 10-15 degrees to the left, and have it at the 1 o’clock position on the right side, carrying appendix of course. I’m not able to cant the Velo 4 in that fashion (it may be possibe if one clip is removed).

I also installed the largest camming bar, which helps a ton. Tenicor should rework the Velo 4 to have the same camming bar (and not the integrated camming bar).

There’s still a hot spot with this holster, though. The muzzle of the shell is pressing down into my pelvis badly. I’ll be cutting another yoga wedge (a small one, just to negate the pressure of the shell’s muzzle).

I’m already quite happy with this holster. It appears to be more stealthy, as I’m just casually wearing while at home and it’s not as noticeable as when I’m wearing the 1911 in the Velo 4.

I’ll maybe capture some video footage to show how well both work with my 1911 and body type.

Categories
appendix holster

I’ve Bought A Tenicor Certum Kydex Holster ! It’s OTW !

Yeah, I’ve a Tenicor Certum v3 on the way.

The Velo v4 isn’t agreeing with me. I’ve messed with it maybe 3 weeks, moving it around each time and waiting a few days to acclimatize to it. I’ve even tried adding additional wedging to it (for me, I need a bit more wedging but not necessarily as much peakiness – the integrated wedge feels too “sharp”. I used a piece of sculpted yoga bar as a wedge. It’s

I’m a bit greedy and don’t want to return the Velo just yet, but still want to experiment with the Certum, so I ordered it. I can always resell the Velo later on, if needed.

I’m certain I’ll have to add a wedge to the Certum as well, but at least it will be easier to add a wedge than with the Velo. And, if need be, I can always use the Certum as a base for the Phlster Enigma, if/when I decide to go that route.