Tag: Canik

Categories
1911 2011 handguns

Thoughts on 1911s and 2011s

So, my bonus is on the way.

I still haven’t decided on which gun to get – Bul Armory SAS II Ultralight or the Alpha Foxtrot S15 1911.

Looking at Bul Armory’s website, they’re selling directly from the website, which is good because Gunbroker has a high markup and all I’m seeing is examples for bidding only. MSRP is a lot lower than I’d thought. I’ve also been wondering on the Comp edition, but it’s $300-400 higher and the comp can’t be removed (plus, it may require a custom holster to accommodate the comp).

I checked Gunbroker and up until now, the AF S15 was available – they’re now sold out, but I suppose I can reach out to the manufacturer’s web page.

On top of that, the EAA Girsan Witness 2311 appears to be on the verge of being released to the public. I’m seeing placeholder listings at Wikiarms.com (specifically at Search “eaa witness 2311” for sale | WikiArms AmmoEngine). These have a starting MSRP of $999 but many of the listings are below MSRP. They’re selling 10mm in 4.25″, 5″, and 6″, and they’re selling 45ACP in 3.5″, 4.25″, and 5″. I do not see any listings for 3.5″, which they’re supposed to be selling.

The con with the 2311 is that I do not know anything of the gun. For example, I’ve no idea on the gun’s metallurgy, nor the reliability of EAA 1911s in general. It’s also a first run for them, so they’re bound to make some mistakes. I’ve no idea of their warranty coverage and customer support dependability. I might just wait a bit for the 2311.

I was also looking at getting the Canik Mete MC9 but it’s currently having issues and I don’t actually need that gun – it’s a want that I can buy later on (ie, there’s no rush).

So, it’s still either the Bul Armory Ultralight or the AF S15 1911. I might have to flip.

Categories
1911 Canik handguns

Annual Gun Buy is Almost Here!

It’s almost time for my annual bonus. Every year, I get 1-2 firearms.

Shot Show 2023 exhibited a lot of promising guns this year!

Rock Island Armory (RIA) has released two new firearms – the BBR 3.10 1911 in 9mm and the LI380.

The BBR 3.10 still looks as if the grip was an afterthought. I’m not sure I’d like this gun even as a range toy. Yeah, the gun should be more manageable in 9mm (versus the 45ACP of the original 1911). This gun looks good but isn’t for me.

The LI380 is almost certainly a rebadged (or licensed copy) of the Bersa Thunder 380. I already have one of those, a Plus model.

I frequent the r/1911 subreddit group. Someone asked about a particular 1911 and posted a picture of the Fusion Firearms 1911 Riptide Carry. It is a Commander-sized (4.25″) 1911 that is bob-tailed and chambered in 10mm, 45ACP, or 9mm. It is blued with nice wood grip panels. It is made by a gunsmith that used to work at Dan Wesson. The gun goes for $800-$900. It looks NICE. I’m considering this gun in 9mm.

I’m also looking at the newly press-released Canik Mete MC9, which is a micro-compact polymer handgun that is very similar but smaller than the TP9 Elite SC. It usese the same mags as all of the other Canik handguns. I’m definitely getting this firearm, as it’s MSRP is $439 and I can use my Elite SC mags with it.

There’s also the Springfield Armory Prodigy DS, which is not only a double-stacked 1911, but is a legit 2011 (the grip being modular, which is typical of all 2011s). If I obtain this firearm, it will be the version that comes with the Hex Dragonfly optic. This firearm is in the $1500 range.

There’s also the EAA/Girsan 2311, a new 2011 offering and this handgun starts at $999! It is optics-ready, is a true 2011 (grip is modular), will come in 10mm, 9mm, and 45ACP, and will come in four barrel lengths. I’m leaning toward this firearm in 9mm.

There’s also the Dan Wesson TCP, which is a single stacked 1911 but is, well, a Dan Wesson. It has a rail and has a tri-topped slide. It has a gold bead front sight, too. These can be found in the $1500 range. I’m leaning towards the 9mm version of this handgun.

I’m also eyeing the Bul Armory SAS II 3.5″ Ultralight 1911, which can be found in the $1400 range.

What’s currently decided is that I’m getting the aforementioned Canik Mete MC9. I’m not sure which 1911 I’m going to get yet. It’s a toss up between the Bul Armory SAS II Ultralight, the Springfield Armory Prodigy DS with optic, the EAA/Girsan 2311, or the Dan Wesson TCP 9mm. I really really want a 2011 variant, so I suppose the Dan Wesson is out. Of the 2011 variants, the EAA will be unproven since it is their first offering, so I suppose that gun is factored out based on that fact. Of the Bul Armory and the Springfield Armory Prodigy DS, the Prodigy DS has been having reliability issues, so, I could factor out that gun from the choices, which leaves the Bul Armory as the most likely handgun of choice!

Now, if I get the Bul Armory, holsters will be problematic, as I’ve spent close to $200 on holsters for Commander-sized 2011s the past two months. Well, if I’m buying a $1500+ gun, another $100 for a good holster (Tenicor) is a drop in the bucket, IMO, so I guess I can either see if the SAS II will fit in my 4.25″ Tenicor holsters first, or just straight-up order a new one. We’ll see.

UPDATE: I’d decided on the SAS II but then started focusing on the sights – I don’t really care for them, especially since the rear sight has to be removed to use an optic. That’s a huge turn-off. I’ve also seen at least one review that complains that the SAS II UL is so light that it feels snappy. That could be a problem, as well. The Prodigy 4.25″ is better in that regard, but I’m betting the SAS II TAC doesn’t have the same aforementioned issue with the rear sight. Then I started thinking about the EAA Witness 2311 – it will come in 4 barrel lengths and is optics-ready, which means they’ll be selling a 3.5″ variant (no idea how small, but it’ll be in the 3″ range). They said all 9mm 2311s will carry 17 rounds, so I won’t be losing any ammo capacity if I go the EAA route. So, as of 1/28, I’m leaning toward the EAA Witness 2311, or Bul Armory SAS II TAC, or the Prodigy DS 4.25″.

UPDATE 2: Well, shit. There isn’t much info provided on the Witness 2311, but I looked at the press release page and saw that there’s at least two slide versions: with and without optics cuts. Also, the optics-ready version will remove the rear sight when using an optic. WTF is up with that trend? I’m at a loss on which to choose. I’ll probably wait a bit for EAA to add the Witness 2311 to their product list, since I know NOTHING about that firearm. For example, what’s it’s weight? It’s not going to be lighter than the SAS II Ultralight, that’s for sure (my guess is that it’ll weigh close to 2 lb).

UPDATE 3: While waiting for the annual bonus to be released, I’ve been conducting research on my potential choices. I continue to see complaints of the SAS II Ultralight being snappy, and since I hate snappy guns, I think I’m going to put the choice of Bul Armory aside. This sucks because recoil perception differs from person to person – I may find that I can handing the SAS II fine, but I’m not willing to risk getting one only to be disappointed. I’m now focused on the Alpha Foxtrot S15 1911 (not a true 2011-spec gun – it’s a doublestacked 1911) or the Dan Wesson TCP, in that order. Following those two choices is the Fusion Firearms Riptide C. Why did the EAA Witness 2311 get bumped down? I have yet to see anything from EAA on the gun, other than what they showed during Shot Show 2023 and the pre-release details of that gun that they released back in December. So, as of 2/12, it’s the Alpha Foxtrot S15 as the gun of choice, unless I find any information that disqualifies it, then it will be the Dan Wesson TCP in 9mm.

UPDATE 4 (LOL): I’ve just discovered that the EAA Witness 2311 will be released to consumers in April 2023. So, with that being said, the Witness is back in the hunt. I’m thinking I’ll just stay with the Alpha Foxtrot, and get the Witness next year. Or, get the Witness this year and wait for the Alpha Foxtrot next year. I could get both in one shot but if I’m going to do that, I may as well get a Staccato 2011, but I’m not buying a $2K+ handgun…I can afford it but spending that much money on any handgun is fucking ridiculous, in my opinion.

Categories
.45 ACP 9mm

Handgun Parts Received

Last week I ordered a +4 aluminum basepad for a Canik TP9 Elite SC magazine that had a flat baseplate. I bought the +4 basepad from Taylor Freelance.

It took three days for delivery. I ended up installing it wrong and had a very difficult time removing it (if you buy this part, remember to remove the plastic at the bottom of the mag spring, otherwise you’ll have a very difficult time removing the +4 basepad).

The magazine was a 10-round mag that I converted to 12-round. With the +4 basepad, the gun now holds 16+1. I carried with it yesterday. Other than initial coldness of the metal against my skin, it wore well.

I also bought an 18-lb progressive recoil spring for my .45ACP Commander 1911, from BH Spring Solutions. I compared the old spring with the new and the old one is compressed a bit and also feels a bit lighter than 18-lb). Inside the 1911, the new spring offers noticeable resistance. I can’t wait to take the 1911 to the range. Sadly, I can’t right now, as I’ve some medical issues that currently block me from leaving the house (not Covid).

I’ll capture range footage of the 1911 once I’m healthy!

Categories
7.62 x 39 AK AK-47 AK-P Arsenal Canik PSA SAM7UF-85 TP9 Elite TP9 Elite Subcompact

AK Range Day!

Today’s range day was deemed AK range day!

I took out the Arsenal SAM7UF and PSA AK-P. The former is a milled rifle that I’ve owned 2-3 years but never shot until today. The latter is an AK pistol that I bought 3-4 years ago and have been shooting off and on.

Both are dreams to shoot. I’ve no range footage because I hate recording when shooting long guns (my mounting point doesn’t agree with the rifle shooting position).

I shot the SAM7UF first. I thought it would be hard on my shoulder but it was rather mild, especially considering that the folding stock’s makeup is usually something that folks complain about. It’s supposedly not easy to shoot, but the stock didn’t bother me (I’ve the rails covered with paracord).

I thought the recoil would bother my shoulder with that stock but much of the recoil never made it to my body. The milled rifle is heavy and the heft absorbed much of the recoil.

I shot out to 25 yards. I wasn’t hitting point of aim but I think it’s because the rifle may be zero’d to 100 yards. I need to study the method of zeroing AKs. When I do, I’ll revisit the range with the SAM7 and zero the gun (on the 25 yard range, since I’ll have a difficult time seeing further than that).

The gun has some blast, too. It seems it has more blast than my other long AK (a bastardized AK-63D from Classic Firearms). I shot 30 rounds before I switched to the PSA AK-P.

The PSA AK-P is a flamethrower but I already knew that. I didn’t feel like squinting trying to hit 25 yard targets so I moved the target closer, to half that distance.

I’ve a red dot sight for this firearm but I removed it when I last took it out, as I hated it. I’m decently accurate with the iron sights, so I shot 30 rounds at one of those target papers that have 5 targets on it. all but maybe 4-5 landed on paper (because the targets on the edge of the paper don’t leave much room for error and I was doing a lot of quasi double-tapping). The groupings were pretty tight for the rate of fire I used. I also shot while standing. A picture is below.

12 yards, standing w/ irons…

The gun bucks and throws fire. Additionally, it got HOT! I burned myself once and had to wrap it up in rags before I put it in it’s case so it wouldn’t melt the inside foam. Also, keep in mind that this is a pistol and the brace is HARD on a shoulder with the kick of an AK pistol. I also tend to pull the gun in really tight while gripping the mag. I’ll be bruised tomorrow.

Lastly, I always try to shoot my carry gun when I’m visiting the range, so I shot some defensive ammo from the Canik TP9 Elite SC. This ammo is something new to me, but I bought a batch of it from my range 2 nights ago, since it was on sale at 19.99 for a box of 50. The make and model is Federal 115-gr Hi-Shok JHP. I bought 250 rounds of it, not knowing if it was good or not but liking the sub-$20/box price. I later researched the ammo and found that the ammo is GOOD and that law enforcement uses it. I’d assumed that since the box was white and since the ammo wasn’t being sold in 20-round boxes, it was range ammo. It is not. So, tonight I bought 100 more rounds of it just to shoot with tonight. It shot well, without hiccups, and without feed or extraction issues. I may end up trying to buy it in bulk but my research shows that when looking for it online, the low price is 0.49/round, which is a bit high compared to what I found at my range. My range will carry it until it runs out and won’t let me buy in bulk anymore (the person that sold it to me apparently shouldn’t have let me buy so much without shooting – I bought it after my shooting session).

Right now, I’m right at 482 rounds shot through the TP9 ESC. Expect that number to go quickly as I continue to practice with it.

The AK-P currently has 370 rounds through it. I could shoot it more but for some reason, shooting that gun indoors gets old quickly (it has tremendous blast). I looked at the internals (trunion, bolt, and bolt carrier) and the parts aren’t beat up (this model is a GF3). Most AK snobs hate US-made AK, and think they’re sub-par. If I have any issues, it’ll be something like fire-pin issues, or something stuck in the firing pin channel (primer metal), or maybe a loose firing pin retaining pin (which probably won’t be an issue, as I’ve checked it and it is not loose at all). I will probably buy another firing pin, in case the OEM one breaks.

The SAM7UF only has 30 rounds through it but I’ll try to shoot it more, now that it’s no longer virgin.

Categories
Canik subcompact TP9 Elite

Alert! Found some TP9 Sub-compact mags!

I’ve found a website that currently have the TP9 Elite SC mags in stock.

Note that they’re 10-round mags, though, but you can easily alter those mags to accept 12 rounds. They have the pink extension base plate.

I just ordered two of them. I’ve also checked the reputation of the website. They’re legit.

UPDATE (11/15/2021): I’ve a tracking number and they should ship either today or tomorrow!

UPDATE (11/18/2021): Wow! They’ve arrived! 2 days ahead of schedule!

Categories
Canik subcompact TP9 Elite

Was Finally Able to Obtain a TP9 Elite SC Magazine

Three weeks ago, I got a notice that Grabagun had TP9 Elite SC magazines back in stock, but I didn’t see the notice until 3 hours after it was posted – when I logged in to purchase some, they were again no longer in stock.

Last week, I got another notice and saw it within 20 minutes of receiving the e-mail. When I logged in to purchase, I saw they were still in stock, but when I tried to purchase two of them, the system would error out with an obscure message. After investigating and testing, I found that Grabagun only had one magazine left. Either all but one had sold within 20 minutes or Grabagun only got a few restocked. I ended up purchasing that one magazine.

A few things:

The mag was $37.69. Shipping was $5.42. With tax, the order was $44 and some change. That’s quite a bit for one magazine.

Also, the mag was a 10-round magazine with a flush mag plate. I’d wanted 12- or 15-round mags, but since I hadn’t seen any in stock going on six months, a 10-round magazine is better than no mag at all.

I also saw a post on the Canik reddit page that someone had bought a 10-round mag and had ground down the nubs that limit it, regaining the 2 extra rounds. I’d planned to do the same if I had to buy 10-round mags.

I received the magazine today.

Pictures are below. The 12-round mag with the pinky extension is depicted on the left, while the 10-round mag with the flat base plate is on the right. Notice the indented areas on the 10-round mag. That is what is limiting the magazine to a maximum of 10 rounds.

I was able to use a dremel to grind down the bumps that limit the capacity of the magazine. I then tested the magazine by loading it with snap caps. I was able to load 12 of them (max).

For those that might shun such a modification, the magazine already has ammo witness holes, as well at mag catch holes, as well as two round holes along it’s spine. Grinding the limiters isn’t going to cause any type of feed issue if you’ve not left irregularities after you’ve removed those bumps. I also really just wanted extra mags for range use. As I use the mag at the range, if I’ve not noticed any issues with using it after I’ve modified it, I’ll probably decide to use it for carry as well.

Categories
100-gr 2.0 9mm Alien Gear Canik Cloak Tuck frangible Hevi Shot holster N8 Tactical subcompact TP9 Elite

More Testing – holsters for the TP9 Elite Subcompact

So, I received the holster shell for the Canik TP9 Elite SC on Saturday.  

I installed it on my Alien Gear Cloak Tuck 2.0 holster base, although I hat to mess around with the mounting screws and bushings to customize the fit.  As well, I used blue thread locker on the screws.  I’ve been carrying the handgun in this holster half the day.  It carries well with this holster.  It doesn’t protect from the grip texture, though, but I installed rubber Talon Grip tape on the grips on Saturday, as well, so the texture doesn’t beat up my skin.

I’ve yet to give the N8 Tactical holster a try.  Maybe soon.

Also, I want to give the holster that came with the handgun another try, soon, too.

I found that I’ve another box of Hevi Shot 100-gr frangible 9mm ammo.  I shot most of a box (of 50) from the TP9 SC.  I think I may attempt to use this ammo as SD/HD ammo.  It shoots flat and doesn’t jam the handgun.

UPDATE:

I’ve been giving the Alien Gear holster a try, carrying it around the house.  It carries well but the included Canik holster works surprisingly well.  I still do not know which I’ll use.  I suppose I can use all three over a long time span and report on my findings.  So, with that being said, I’ll be carrying with the Alien Gear first!

Alien Gear Cloak Tuck 2.0 with TP9 Elite SC shell
TP9 Elite SC in the included holster provided by Canik
TP9 Elite SC in the N8 Tactical OT2 holster
Alien Gear Cloak Tuck 2.0 with TP9 Elite, IWB