Categories
1911 2011 AF1911-S15 Alpha Foxtrot ammo Bul Armory defensive ammo SAS II Ultralight training

Another 1911 Range Visit / Upcoming Training

Once again, I took the Alpha Foxtrot S15 to the range, as it exhibited some failures during my last range visit, which I believe I documented on this blog.

I also forced myself to shoot the SAS II UL this go-around, since I’ve been neglecting the gun (and I’m also carrying it).

I brought some of my open boxed SD ammo to test the S15, as I initially thought it was having issues due to bad ammo. Another culprit could have been the mag (there was one magazine in particular that was having issues). Another culprit could have been me – I’d shot the gun toward the end of the visit and I was probably getting tired (hand/wrist/arm fatigue).

Right off the bat, I got two fails to feed, with the suspect mag (I’ve marked it). I ended up stopping everything, emptying the mag of ammo, and putting the ammo in a different magazine. The failures stopped.

I’m thinking I might ask Shield Arms to replace this mag. The mag is new and should be covered by manufacturer’s warranty. It’s odd that the failures don’t always occur, though. The ammo it was choking on was Sig Sauer V-Crown 147-gr JHP.

It also failed once when shooting Remington Golden Saber 147-gr JHP. It ate 21 other Golden Sabers without issue, though.

Those were the only failures, so it wasn’t really all that bad this time around.

I’m at 623 rounds through the S15 now. The gun is uncannily accurate. It doesn’t seen to be as snappy as the SAS II UL, but it has better grip surfaces (by far). Now that I know that it’ll eat JHP without issue, and now that I’ve tested the mags, I can actually consider carrying this gun now, although I’ll keep testing it (I’m still wanting to carry the SAS II UL, too).

I’m at 661 rounds through the SAS II now. I shot 38 rounds tonight, all Herters Target 115-gr FMJ. There were no hiccups or failures. I shot all the ammo at 10 yards, quickly (since I’ve the optic installed).

I’ll be working on posting range video footage this weekend, of both guns. I have footage from the last visit but the settings were out of whack and the field of view wasn’t the best (the framing was off-center, as well).

Next week, I’ll be attending my first handgun course. The plan is to use my current carry gun (SAS II UL). I’ll be bringing my Glock 19 as a backup gun, in case they state my SAS II is too small and in case the SAS II has a breakage. I’ve other guns I can consider as backup guns but most of my guns are DA/SA and I’m more used to SAO nowadays. I’ve several striker fired duty- and compact-sized guns but I’ve no holsters for them (nor extra mags). At this point in time, the Glock 19 is my best option (I’ve extra mags and several holsters for it).

I plan to shoot Blazer 124-gr FMJ for the course (was told that I’d need 200 rounds, so I’ll buy 4 boxes of 50). Blazer is reliable for me, but so is the Herters Target, so I may buy that brand instead, although the Blazer is just a few dollars more.

I was planning on a rifle course too, but I need the time to purchase mags and magazine pouches that’ll fit my carry belt. I may have to wait until next year for that, although I can also take a rifle course by XCal. We’ll see.

Categories
Bul Armory Optic range report SAS II Ultralight video

Four Week Review of the Bul Armory SAS II UL

This is just a video-captured 20 minute summary of my experiences with the SAS II UL.

Categories
1911 2011 Bul Armory handguns range visit SAS II Ultralight

SAS II UL Optics Adjustment Issues – The Wedge Was Not Needed!

My range notes for today’s range visit:

This is the first time I’ve tried a range other than Elite. Elite closed last weekend, so today I visited XCal in Ashburn (30 min drive – 30 miles).

Shot 48 rounds of Norma 115-grain FMJ. There were no fails.

I also shot 64 rounds of Fiocchi 115-gr FMJ. There were no fails.

Total rounds this session was 112 rounds of FMJ. There were no fails.

I spent a majority of the 1-hour session adjusting my new optic (Holosun HS507K-X2 ACSS). It was initially frustrating because I couldn’t hit point of aim at all. I kept adjusting the sight and was able to get proper windage but couldn’t get the proper elevation…no matter how much I tried, I couldn’t get the dot lower than 6-8″ above the bulls-eys when shooting at 10 yards.

I finally stopped and decided to remove the optic wedge I’d installed (was supposed to fix an issue with the SAS II UL having elevation issues when an optic is mounted). Once I removed the wedge, I reinstalled the optic and was immediately hitting the bulls-eye. It still needs to be fine-tuned, but I’m quite happy with the functionality of the optic and that I solved the elevation issue!

I bought a crapload of ammo, but only got to shoot 112 rounds, since I was attempting to adjust the optic’s point of aim and since I had the issue with elevation.

I wish I’d shot a bit more to break the 500 round count.

I’ll attempt to visit again next week. I’m probably going to apply for membership before then.

I almost decided to put the irons back on tonight, at the range. The only thing that stopped me was that I’d forgotten to bring the irons with me. That forced me to bird-dog the issue – I didn’t need that optic wedge I’d installed and I shouldn’t have immediately installed it. That’s what I get for believing an internet source – bottom line is, don’t believe everything you read on the internet! Trust but verify. If I’d have installed just the optic and not the optic wedge, I’d have not had an issue at all.

Before removing the optic wedge

After removing the optic wedge
Categories
Bul Armory Optic Reflex Sight SAS II Ultralight

Holosun HS507K-X2 ACSS Vulcan Mounted to the SAS II UL!

This optic is a lot smaller than I thought it woudl be, but it’s also made for smaller handguns (which is why it’s denoted as 507K).

It was rather easy to remove the “iron” rear sight. In fact, the rear sight was loose and was rattling around! It was probably due to the stout JHP I’ve been recently shooting.

I bought an optic shim (I also bought an extra one, for redundancy purposes), as the 507K has zeroing adjustability issues with the SAS II UL.

I cleaned out the optics screw holes and then used the screws that came with the optic to secure the optic to the slide (used blue thread locker).

The optic works well! I have it set to use the ACSS reticle, have the lighting dimmed a bit, and have the setting locked in place. I also have the Shake Awake feature enabled.

I’ll have some time to shoot it tomorrow (will try to visit a new range, as well).