I wanted a place to discuss my handguns and firearms in general. Everyone seemingly has lots to say about guns, so I promise you this won't be a rant blog.
I bought some ammo today from Walmart. While this is nothing special in itself, I did get 100 rounds of WWB .380 FMJ since I don’t have much range ammo in that caliber (I’ve a crap load of self defense ammo in .380, though). They didn’t have much else that I trusted, brand-wise…Tula, which is on Bersa’s Do Not list, and Remington, which I’ve grown to not trust. So, I grabbed the WWB since I’ve never had issues with that brand.
I also bought 100 rounds of WWB 9mm JHP in 147-grain, since I rarely see that weight of 9mm in Walmart. I’d have bought more than that if I thought my wife wouldn’t complain about it.
I forgot to check what SD ammo they had, especially for 9mm. I’ve some Remington in JHP but my carry gun does NOT like it.
I also need to check to see if my Metro Arms 1911 will eat JHP, especially since it is a 1911. I’ve a bunch of .45 ACP but I think it’s almost all Remington, which tends to be dirty and also not be consistent with powder charge.
I’ll take the Metro Arms and the Bersa with me on my next visit so I can get some SD rounds through them. If the Bersa is trust-worthy, I’ll consider carrying it…I just need an Alien Gear holster shell for it.
I’d been thinking of carrying my SP2022 (I love it’s trigger and decocker), but I still think that gun is a bit large for carry…the mag base plates with the pinky extensions don’t help it, either.
I submitted for my concealed carry permit on 13 February 2015. I received the permit on 21 February. I’m now able to carry concealed. Yes, that is probably a record timeframe of submittal and approval for the state of Virginia.
I carried for the first time today. I carried the majority of the day. I decided to carry my XD 9 Mod.2. The holster I used was a Blackhawk nylon holster (non-ambidextrous with no mag holder). I was actually looking locally for the Blackhawk ambidextrous holster with mag holder (product #40AM06BK, specifically)…I tried two Walmart stores but someone has been opening the packages, removing the holsters and switching them, because I’d bought two holsters and upon getting them home, I’d found that the holster in the package wasn’t what was advertised on the package’s labeling. The first holster wasn’t even close to what I was looking for, as it was a large holster made of slick black nylon. The second holster (what I’ve since discovered is a Blackhawk Sportster in size 8) wasn’t what I was looking for but was a small holster that was able to hold my two sub-compacts and three compacts (I’ve no idea if it’ll hold my SP2022, but I doubt it…that gun borders on being full-sized).
So, if you’re looking for a cheap (~$20) holster, this may fit the bill. Most people do not like cheap holsters, but it fit my XD 9 perfectly and didn’t feel uncomfortable. I kept the holster at my 4-o’clock strong side and wore a long thick plaid work shirt over it (my wife said I wasn’t printing). I probably need a better (stronger) leather belt, but the one I was using is actually pretty thick…there was only a tad bit of sag. I’ll look for a better belt tomorrow, as the local gun stores will be open and I’m off work.
What other guns will fit in this holster? My Glock 19 fits perfectly and will slide in/out without issue, as will my XD. My Grand Power P11 fits well, also (not as good as the XD, though). My P320 fits great but the take-down lever hangs on the inside of the holster when trying to remove it. I’m wondering if a bit of tape will fix the issue, but I also realize that I should be glad I can use this holster with the other 3 guns without issue. I want to reiterate that this is probably one of the few holsters you’ll find that fits the Grand Power P11…there are NONE specifically made for the P11, so I searched for holsters that would support guns of similar size/dimensions.
I’ve also ordered two Alien Gear Cloak Tuck 2.0 IWB holsters: One for my 1911 commanders and one for my XD 9. I also ordered an extra shell for the Sig SP2022. When I was looking, I saw that they had a two-holster combo deal, which was a lot cheaper than I’d thought it would be to buy two. UPDATE: I’ve received the holsters and conducted a quick assessment here.
The above pictures highlight a potential issue: The 1911 shown doesn’t have an ambi-safety like my RIA does. The right side of the holster doesn’t look to be able to accomodate an ambi-safety. I’m not sure if that means I’ll have to alter the holster. :/ UPDATE – No, the ambi-safety doesn’t cause any fitment issues.
I also bought a Pro Carry HD from The Holster Store. It’s supposed to be an IWB holster but I keep looking at it, wondering, how the hell is it supposed to mount to your belt? I guess I’ll see when I get it tomorrow. Another thing that grabbed my attention (but only just now and not when I’d ordered it) was this blurb buried within the description:
The Pro Carry HD can be worn both both strong side and cross draw. For carrying this item in the small of back inside the waistband, you will need to select the opposite shooting hand.
I plan to carry my gun at the 4-o’clock position with this holster, but this holster won’t give me the option of carrying in the small of the back IWB, which limits me. If I’m understanding the maker correctly, if I want to carry IWB in the small of my back with this holster, I would need to buy a left-hand holster? Thinking on it a bit, and if that’s indeed the case, that would be the more comfortable way to draw a weapon from behind your back…I might order another of these just to try it out.
The Pro Carry HD is also described as being bulky by customer comments on Amazon, although some customers are defending it by reminding gun owners that they should be buying pants with enough waist room to allow for such a holster.
So, tomorrow, I trek to find a nice gun belt (or even two, if they’re priced decently). I’ve one gun store in mind (Trinue in Warrenton), and if the pricing is too high, maybe Guns and Ammo Warehouse. UPDATE: I ended up going to The Gun Shop, which didn’t have any belts, so they sent me to Virginia Arms, and I left with a black Galco 1.5″ gun belt. I also plan to go shooting either tomorrow or Tuesday morning. I need to begin the break-in process of the Glock 19, my P320, and my GP P11. I will probably carry the XD there so that I can fire off a box of SD rounds (Remington HTP +P 115-grain JHP) to see how well the XD responds to that ammo.
