Tag: frangible

Categories
ammo gun belt handgun holster magazines OWB training

I’m Preparing For My Next Pistol Course

December is approaching and I promised that I would take another pistol training class this year. I might not be able to fit it into 2024, sadly, but if not, I’ll try for Q1 of 2025.

That means I’ve to ensure I’m ready. I’ll need ammo and equipment.

I need 600 rounds of range ammo, with 100 of it being frangible.

I already have a duty belt from Wolf Tactical – I received two of them for Chrismas last year. They’re nice belts, too. They’re dual belts with a nice clasp. It’ll accept molle gear, as well.

I also need mag pouches. They can be easily bought from Amazon and I just need something that’ll allow three mags on the belt (whether it’s one pouch or three). I don’t have the mage pouches yet, but I’m thinking of these.

I’m not even sure which gun to take, but it’ll have to be a 1911 or 2011. Why? Because I went ahead and ordered an OWB holster (a requirement for the course) for a 5″ 2011 (it should fit a 1911 as well). Specifically, I bought the QVO Tactical 5″ “Secondary” OWB holster. They’ve what they call a quick-ship version (it’s already built and ready to ship – customization isn’t allowed for those shipments)…it was $100. The holster doesn’t accept weapon-mounted lights, but that’s OK. The holster mounts to the belt via metal angled belt loops.

The current plan is to take m Tisas DS9 since I already have 1000+ rounds through the gun.

If I haven’t yet taken the class by April 2025, I’ll wait a bit because I’m planning on buying two guns this coming spring and at least one will be a 2011. I’m looking at the new Kimber 2K11 – that’s a $2000 gun, so if I get that, I won’t get another. If I opt for something other than the Kimber 2K11, it’ll probably be a Springfield Armory Prodigy DS 5″ with the optic and three mags package, along with the Fusion/Ermox XP Pro. All of those guns are 2011s and should fit in the aforementioned holster. Then again, if I do decide to take whatever I buy in 2025, I’m going to have to postpone the training course until I get enough rounds through whatever I end up buying….I should probably just use the Tisas Carry DS9.

I also have several other compact- and larger-sized guns that I can use for the course. There are guns that I bought over the years that came with their own holsters, and all but the P320 have 3 mags:

  • Sig Sauer P320 Compact – paddle-style holster
  • Sig Sauer SP2022 – paddle-style holster
  • Canik TP9SA (x2) – Safariland-type holsters with paddles
  • Canik TP9 Elite SC – minimal style holster – covers trigger

Of the four above guns, the SP2022 would probably be the one to choose, but I don’t want to be messing with trying to cope with a DA trigger. At one point in time, DA/SA was all I’d carry, but things have changed and I’m now a SA guy – I don’t want to train to use two trigger types, so the SP2022 will be a backup gun for the training.

Or, I could forego that above list and focus on 1911s/2011s. I just didn’t want to bring a 1911 and have issues during the course – I don’t want to be that one 1911 guy that has constant feed issues. The Tisas has only had one fail to feed in like 1200 rounds, so I’m thinking it won’t have issues (I’ll stick with the ammo it’s been eating without fail – Blazer 124-gr FMJ).

Really, the only thing I need to determine now is what frangible ammo to buy. I’ve 50 rounds of Hevi-shot 9mm frangible that’s in the back of my safe, but I’m not sure if the Tisas will eat it (it should – my RIA Commander ate that ammo without issue).

Categories
ACT frangible Garrison mag release Mecgar PMC SDS Imports Springfield Armory Wilson Combat

One 1911 to Rule Them All – 5″ 45ACP!

UPDATE: I posted to Reddit about the new gun here.

I went to the range today to have my new 1911 transferred to me – the SDS Imports 1911 Duty B45R.

I got there at 9 AM. I turned in the paperwork by 9:15 AM. I was given the gun at 9:20 AM.

The gun was immaculate. It also appears that someone cleaned the gun. It wasn’t pristine-clean, but it had no cosmoline on it (I’m not sure how these guns are normally shipped/stored – many are covered in preservative, which is what cosmoline is). It did have lube on the the frame and slide rails. I cleaned it anyways.

Surprisingly, the gun came with two Mecgar mags! I was expecting one mag, so that’s a big plus. I’ve spoken with other folks and they state that theirs came with one mag. My gun also came in a case. Those other folks stated theirs came in a cardboard box.

The gun is cerakoted but almost looks like it’s parkerized. It is black with a silver trigger and barrel. It has backstrap serrations but has a bare frontstrap. The ambi safeties are not bulky and have extended levers…they look nice!

I’d two other mags – branded Wilson Combat. I planned to use them with this gun at the range this evening. I also planned to use my ACT mag that came with my Metro Arms ACC 1911.

I had a small stash of 45ACP – two boxes of International 155-gr frangible ammo, which doesn’t perform all that well. I also bought two 50-round boxes of PMC Bronze 230-gr FMJ from the range when I arrived. Before I’d left for the range, I’d had the time to swap out the black plastic OEM grips with brown/tan/black grippy G10s that complement the gun.

I ended up shooting the two boxes of International and shot one of the two boxes of PMC. The PMC felt as if it were hot ammo (it always does). The International ammo surprisingly had no misfeeds.

One of the mags caused a failure at the very first round within it’s mag – It was the ACT mag. I ejected the mag, stripped it of ammo and put it to the side. I would not use it the rest of the range session.

The Wilson Combat mags were not flawless, but I’ve found it wasn’t a fault of the mags. The gun has a mag release that will work for the Mecgar (and ACT) mags but will not work well with the WC mags because it needs to be beveled. The mags would sometimes not want to be inserted. To fix this, I need to order a mag release from Wilson Combat. It will swap into the SDS 1911 without issue and will work with non-WC mags.

Pics of the gun:

A photo of the SDS 1911DB45R after the transfer.
These grips are NICE but a bit too slick for range use.
I shot the gun for the first time tonight (17 Feb). I used these G10 grips. I’ve no complaints…they work well, and I had no issues controlling/gripping the gun.

Pics of the range targets:

SDS 1911B45R first shots.
This is 32 rounds of PMC Bronze 230-gr FMJ at 7 yards. I was getting familiar with the trigger, sight picture, and the ammo.
I wanted to directly compare the PMC Bronze 230-gr FMJ and the International frangible 155-gr ammo. I bought maybe 250 rounds of the International maybe 2 years ago and it’s inconsistent ammo but it’s better than not having ammo. Upper left and lower right is PMC. Upper right and lower left is International. All targets have 8 rounds. All were shot at 7 yards.
These were shot at 10 yards, using International frangible 155-gr ammo. First, I shot center, then I shot upper left, then upper right, and lastly I shot lower left. I’m getting tired and it’s showing…the rounds aren’t hitting where I’m aiming. The groups are still decent, though, especially the first group.
These were at 10 yards, and all are shot with International 155-gr frangible ammo. 8 rounds were shot at each target. I’m getting tired. The groups aren’t bad, though.
This is 4 mags of 8 rounds each. The distance is 7 yards and I used International 155-gr frangible ammo. These were fast (not exactly rapid) fired, maybe 2 shots a second, starting from low ready for each mag. Not bad for me.

Before I left the range, I looked at their store items. They carry WC mags and had one full size 1911 mag left. I bought it (since it’s price was $34, which is rather inexpensive from what I remember of WC mag prices).

The gun is solid. There’s absolutely nothing wrong with it, aside from the mag release. It’s accurate. It’s smooth. The trigger is awesome. The finish and fitment is on par with $700-800 guns (Springfield Armory Garrison), in my opinion, yet I bought this gun for under $500. My only misgiving was that I didn’t get it in stainless steel (that version is $100 more).