Month: May 2023

Categories
1911 2011 9mm AF1911-S15 Alpha Foxtrot Bul Armory SAS II Ultralight

My AF1911-S15 – First Range Visit

This gun can shoot!

I took it to the range today and shot 150 rounds from it (Blazer flat-nosed 147-gr FMJ and Herter’s Target 115-gr FMJ). There were no feed/eject or firing issues.

I shot it at 7 yards then moved to 10 yards. I initially had issues – was hitting low and left of point of aim. Even when I stopped pulling left, I was still hitting an inch low. As I kept shooting, I learned how to better control the gun, and so my groups got tighter as I shot. I began to hit bullseyes.

Even at 10 yards with irons (and I wasn’t wearing my prescription glasses), I was hitting bullseyes.

It’s easy to shoot this gun well – much easier than the Bul Armory, IMO. The differences are that the S15 has great front strap and back strap checkering, which helps greatly with gripping the gun. As well, the S15’s slide is heavier, which helps with recoil management, as the slide soaks up some recoil.

The SAS II UL became a different beast altogether once I added the optic to the handgun. I’m shooting the S15 just as well, without an optic, which is amazing. Yeah, the SAS II still shoots quicker at distance, but that’s solely due to the optic. Once I get the S15’s slide cut for an optic, it’ll be just as good as the SAS II at shooting quicker at distance.

And yeah, I shot 150 rounds through one magazine. it was a pain in the ass, but I had no choice. I had no issues with the magazine (it is a gen 2 Shield Arms mag).

GT Distributors did send me an RMA shipping label and I’ll be sending them back the wrong mags they sent me…once I send them back, I’ll reach out to them and ask them when to expect them to correct their mistake…I still need (and paid for) S15 mags.

I’ll update this post with range footage sometime this weekend.

Categories
1911 2011 AF1911-S15 Alpha Foxtrot

My Alpha Foxtrot AF1911-S15 Has Arrived!

Can’t wait to get this gun to the range – will try to visit the range either tonight or tomorrow morning.

Ordered it Sunday, received it today around 3 PM.

Comes with the one Shield Arms mag (this gun wasn’t cheap – they should think on including two mags with the gun). I ordered 3 more from GTdist.com and they arrived yesterday but they sent the wrong mags – sent me 3 AR PMAGS…WTF. So, I’ve to visit the range with one mag until GTdist.com remedies my order.

The mag doesn’t rattle within the grip, as I’ve seen in Youtube videos, which is very good.

The gun is very tight. The DLC coating looks and feels really good. I will more than likely sent it somewhere to get the slide cut for an optic, but I’ll probably do that 6-12 months from now.

It feels slim. I’ve been carrying the Bul Armory SAS II UL long enough to where this gun feels heavy in comparison, but realistically, it’s not heavy at all.

I love the grip texture (feels less “slick” than the SAS II UL).

The thumb safety is super strong, though…execessively so, IMO. Perhaps it’ll wear-in.

Trigger is super-crisp…no creep whatsoever. It’s the best trigger of any of my 1911s/2011s.

I checked the trigger pull with my Lyman gauge and got 4 lb 15 oz from an average of 5 pulls (lowest being 4 lb 8 oz).

It also fits in my Tenicor Certum 3 holster.

I’m impressed so far. Waiting for some gotcha to show itself, though.

Categories
1911 2011 9mm AF1911-S15 Alpha Foxtrot

Alpha Foxtrot AF1911-S15 – On the Way!

I kept eyeing the AF1911-S15 even after purchasing the Bul Armory SAS II UL, so I took a hard look at it and decided to purchase it.

I bought Gen 2 version of the handgun, which also has a threaded barrel. I bought it from Battlehawk Armory. Since it only comes with one 15-round mag, I ordered three more (generation 3 mags from GT Distributors – I’d have ordered straight from ShieldArms.com, but they our currently out of stock).

Now, I could’ve waited until mid June for their optics-ready version but I’ll be out of the country that timeframe and these were currently in stock (they aren’t always stocked).

I’m excited, as this particular gun is very nice.

If I find that I want/need an optics cut, I can find a business that can perform that modification.

Categories
2011 Bul Armory handguns SAS II Ultralight trigger

I Was Able to Upgrade My SAS II Ultralight’s Trigger Shoe!

I’d mentioned before that I bought a silver and flat-faced trigger shoe from the Bul Armory online store.

The SAS II Ultralight has a modular trigger shoe. At their store, you can chose between 15 different shoes (5 types of shoes, with each being offered in 3 colors).

The gun comes with the short curved black trigger shoe. I bought the short flat silver trigger shoe.

It took me a while to determine how to remove the trigger shoe (sounds simple to do, but not if you don’t have the correct sized allen key).

When I finally got the short curved shoe off, I found that the short flat shoe wouldn’t fit. It required fitting.

Now, I understand what fitting is and why there’s the need to fit 1911 parts, but this is a damned trigger shoe…marketed as modular. It should be immediately swappable, just as most mag releases or slide catches should be immediately swappable.

I was going to let it sit until I went on vacation but this was bugging me, so, today, I fitted that shoe. It was just a hair off. It took maybe 15 minutes to remove just a bit of material from the shoe. The most difficult part was trying to determine where to remove the material (the part that needed to be fit was curved. I ended up taking a bit of material from each end of the curved part, taking my time, removing a bit, then attempting to fit (wash, rinse, repeat).

Once I got the part on, I added a bit of blue thread locker to the overtravel screw (needed to be removed to remove the trigger shoe).

The new trigger shoe looks GOOD!!

SAS II UL with new trigger shoe
SAS II UL with old trigger shoe
Categories
Bul Armory Optic range report SAS II Ultralight video

Four Week Review of the Bul Armory SAS II UL

This is just a video-captured 20 minute summary of my experiences with the SAS II UL.

Categories
1911 2011 Bul Armory handguns range visit SAS II Ultralight

SAS II UL Optics Adjustment Issues – The Wedge Was Not Needed!

My range notes for today’s range visit:

This is the first time I’ve tried a range other than Elite. Elite closed last weekend, so today I visited XCal in Ashburn (30 min drive – 30 miles).

Shot 48 rounds of Norma 115-grain FMJ. There were no fails.

I also shot 64 rounds of Fiocchi 115-gr FMJ. There were no fails.

Total rounds this session was 112 rounds of FMJ. There were no fails.

I spent a majority of the 1-hour session adjusting my new optic (Holosun HS507K-X2 ACSS). It was initially frustrating because I couldn’t hit point of aim at all. I kept adjusting the sight and was able to get proper windage but couldn’t get the proper elevation…no matter how much I tried, I couldn’t get the dot lower than 6-8″ above the bulls-eys when shooting at 10 yards.

I finally stopped and decided to remove the optic wedge I’d installed (was supposed to fix an issue with the SAS II UL having elevation issues when an optic is mounted). Once I removed the wedge, I reinstalled the optic and was immediately hitting the bulls-eye. It still needs to be fine-tuned, but I’m quite happy with the functionality of the optic and that I solved the elevation issue!

I bought a crapload of ammo, but only got to shoot 112 rounds, since I was attempting to adjust the optic’s point of aim and since I had the issue with elevation.

I wish I’d shot a bit more to break the 500 round count.

I’ll attempt to visit again next week. I’m probably going to apply for membership before then.

I almost decided to put the irons back on tonight, at the range. The only thing that stopped me was that I’d forgotten to bring the irons with me. That forced me to bird-dog the issue – I didn’t need that optic wedge I’d installed and I shouldn’t have immediately installed it. That’s what I get for believing an internet source – bottom line is, don’t believe everything you read on the internet! Trust but verify. If I’d have installed just the optic and not the optic wedge, I’d have not had an issue at all.

Before removing the optic wedge

After removing the optic wedge