I wanted a place to discuss my handguns and firearms in general. Everyone seemingly has lots to say about guns, so I promise you this won't be a rant blog.
To secure the plate adapter to the slide, use the short screws that came with the gun. I’ve used blue thread locker here, but some folks use red. Note that, to remove the screws, the red will require heat to be applied to the screws – the heat will dissolve the thread locker.These screws were pefect. Anything longer than this will not screw onto the adapter plate. Max torque is 15 in-lb. Don’t red thread locker for these screws…use only blue!
I’ll let you all know when the optic has been zero’d and how it performs. This optic was highly recommended by competition shooters. I’m certain it will carry well, too.
Note that the optic was LONG in length…it’s the longest of all the Cyelee optics but also has the biggest view port. I thought it wouldn’t fit well, but it fit as if it were made for the gun.
The dot is 8 MOA, which some folks think is too big. It’s designed to lessen brightness of the dot, to lessen the effects of astigmatism. I’ve heard that it shoots fine at distance (and I’ve also heard that some folks have issues shooting this dot at distance due to the large size of the dot).
The battery is housed on top of the optic’s deck, between the glass and the screws.
The irons offer co-witness, as well. IMO, though, my RFX45 would offer excellent co-witness with this gun’s adapter plate, as the optic sits low already…it’s a pity this will not fit onto the adapter plate.
I took the Prodigy DS Compact to the range today and brought 150 rounds. The Prodigy ate all of it without issue – no fails (was Magtech 115gr FMJ). There are now 270 flawless rounds through the gun.
A Cyelee CAT is mounted to the DS. These are two mags of some good groups (for me and this particular gun).
I still don’t like the trigger, but I may have adapted to it (or learned to ignore what I don’t like about it). I’ve also been working on my support hand grip. Yeah, my support thumb isn’t glued to the gun – I’m fine with that, as THM says that doesn’t matter…what matters is that other portions of the support hand being glued to the grip. I noticed that I didn’t figet with my support hand as I normally do. Also, my strong side thumb isn’t resting on the thumb safety. My thumb does not like sitting up there (I’ve developing arthritis)., so I let it sit wherever it’s comfortable…I’m OK with that.
I’m shooting at orange 1″ pasties at 10 yards. My goal was to try to stack the rounds. I also challenged myself by trying to shoot at a decent pace. The first mag, I was shooting at the top orange pasty. The second mag, I was shooting at the left-side pasty. I was quite surprised, especially as it was toward the end of the range session, when I typically tire and start shooting badly.
UPDATE (4/25/2025):I did a detail strip of the Prodigy DS Compact yesterday, to check which parts were MIM, but also compared the sear spring with an EGW sear spring for Commander-size 1911s. The EGW was a tad taller and would not fit in the gun – I know, I tried – it didn’t work. I then looked at and very slightly tweaked the middle tine of the sear spring and then put the gun back together. When I did a function check, I immediately noticed that the weight of the trigger was less – the trigger wall didn’t see as bad as before. I checked the trigger weight via Lyman’s gauge…it’s at 3 lb 2 oz now. It dropped a full pound. It feels GOOD! I’ll be visiting the range tomorrow (at 10 PM) to test it and put more rounds through the Prodigy. I want to be at 500 within the next 7 days (I’m at 260 now).
Why did I opt for a budget optic, and in this discussion, what consitutes “budget”?
My Holosun 507K X2 ACSS optic was not cheap, at $300+. I don’t need another $300 optic. I needed an optic that wouldn’t break the bank while also being reliable. The CAT is $116 and has a reputation of being robust in durability, so I wanted to try it.
I also wanted to try a green optic to see if it agrees with me better than red optics.
If the optic does well for me, I’ll buy a few more, depending on if they’ll fit my guns — they don’t have many RMSc-footprinted optics. 🙁
I’ll eventually conduct a video review of the optic, so stay tuned for that.
