Categories
9mm Springfield Armory

Kuna + Faux 4-Piece Brake?

Awhile back, I bought a faux 4-piece muzzle device from PSA for use with my AK-V, which I’d discussed in this post.

I didn’t like the look, so it didn’t stay on the AK-V long – I restored the OEM flash hider.

The 4-piece brake isn’t really 4-piece It is one solid piece, meant to mimic the Bulgarian 4-piece flash hider.

It had been sitting on top of my safe up until tonight. I was wondering if it would fit on the Kuna, so I attempted a test fit.

First of all, whoever installed the OEM brake on the Kuna went Hulk-mode, because it took a huge effort to remove it!

The PSA brake fits, though. Not only does it fit, it looks better on the Kuna than it does on the AK-V. As well, it extends the muzzle outward a few inches, which means I don’t have to worry as much about getting my hand too close to the muzzle. The faux brake doesn’t have ports, so I don’t have to worry about plating hitting my hands.

Here’s how it looks:

I also noticed that the safety has started to loosen…it’s much more loose than when I first got the gun. I’d already been lubricating the rotating areas around the safety, under the receiver. I added a tad more oil so that it can continue to feel fluid.

So, it appears that I need to visit the range again, but I need more ammo. I will probably buy more from Cabelas to keep me busy through Thanksgiving.

Categories
AK AK-P CNC Warrior muzzle brake Palmetto State Armory PSA

Success – Mounting CNC Warrior 4-pc Flash Hider to PSA AK-P!

I posted about my failures in mounting the CNC Warrior 4-pc flash hider onto my AK-P.

I returned that flash hider but wanted to try again with another brake, thinking there was something wrong with first flash hider.

I bought a used one a few weeks later (slimmer version but has the same threading). That one would not screw down fully flush, either. I decided to keep the flash hider but was going to ask for an RMA of the pistol, thinking there was something amiss with the threads or muzzle.

Last night, I did some research and found a few folks having the same issue but with other rifles and pistols (some non-AKs). One guy said he took a copper brush to the threads of the muzzle and the threads of the flash hider, and had success in fully screwing down the brake. I tried it and it worked! There was a lot of crud on the threads of the muzzle and flash hider (the muzzle device was used and not clean).

I’ll be taking the AK-P to the range this week to test the new muzzle device.

UPDATE (8/5/2025): If you’re curious about how well the flash hider works, have a look at the below – while there’s still flash, I could not see it behind the gun with the 4-pc hider (I can see tons of flash with the OEM booster):

Categories
AK-V brake Bulgarian Faux muzzle PSA

I Bought A Faux Bulgarian 4-Pc Muzzle Device For The AK-V

I bought another modification for my AK-V.

I noticed that there’s a lot of carbon and copper jacket on the then-installed brake that was originally on the AK-V.  The carbon is normal.  The copper jacket is somewhat of an anomaly, though.  The jacket comes off the bullet due to excessive velocity.  9mm was primarily designed to be shot from handguns.  When shot from a rifle, due to longer barrels, muzzle velocity is high enough to where the copper jacket sheds as it’s exiting the barrel.  That copper spatters against the brake.  I’ve 570 rounds through the AK-V, which is enough to where I’m starting to see some build-up.  Cleaning it will be a pain.

I researched for alternatives and was about to put an AR-15 bird cage on the AK-V (I’d have had to drilled a larger diameter bore through it, or found one for 9mm).  I did find some others and was about to make the purchase when I saw that the PSA website had the faux Bulgarian 4-piece muzzle brake back in stock.  They always sell out of them.

Now, this pistol doesn’t really need such a muzzle brake since the 9mm round isn’t throwing flash everywhere when the pistol is fired.  It’s not a 4-piece brake.  It’s only one piece and it’s more of a megaphone in internal shape.  I wanted it mainly because I didn’t want to have to clean out copper splatter.  There’s nothing to clean with this muzzle device…there are no nooks/cranies.  It’s more of a show piece than anything, as it does look good.