Categories
9mm carbine Grand Power pistol caliber carbine

The Kuna and Stribog May Be Similar, But They’re NOT The Same

I asked a guntuber if they’d reviewed the Springfield Armory Kuna. He said that he hadn’t and gave the reason that it was very similar to the Grand Power Stribog SP9A3, which he had reviewed.

Yes, they’re similar in that they’re both PCCs and they both share a similar roller delayed action, but there are major differences, as well.

The Kuna has tighter tolerances and is better finished.

The Kuna offers aftermarket support that offers a lower receiver that supports CZ Scorpion magazines.

Both guns use proprietary magazines, although the Stribog SP9AG specifically features a lower receiver designed for Glock magazines.

The Stribog has better aftermarket support since it has existed longer. The Kuna has aftermarket support that is rapidly growing (it’s a new product offering).

The Stribog is lighter than the Kuna.

The Stribog uses mil-spec AR-15 triggers from the onset, but the Kuna uses a proprietary trigger group.

The Kuna features a monolithic aluminum upper receiver.

The Kuna is fully ambidextrous and closely aligns with the AR-15 platform’s ergonomics. The Stribog is mostly but not fully ambidextrous.

I think most folks assume the two guns are nearly identical solely because their bolts look similar, but I’ve already highlighted the distinct differences between the two guns. There are more to the two guns than them having similar bolts.

It bugs me when a reviewer will not even offer an opinion about a gun because he thinks it’s too similar to something else that he has already reviewed. If you haven’t touched or shot it, how would you know? Those same reviewers will review, without question, 30 different brands of 1911s, though. That reasoning doesn’t make sense to me and it seems to be lazy thinking.

Categories
2011 9mm Bul Armory SAS II Ultralight

The Saga of the Non-functional Grip Safety, Part V

I’d posted about my non-functioning (or intermittently functioning) grip safety on my Bul Armory Ultralight.

I wanted to provide some updates.

I was previously a Patreon member of Graham Baates’ YouTube channel. Not all that long ago, he was touting that Bul Armory’s customer support was great. I then mentioned to him that I’ve little faith in Bul Armory. I explained everything that occurred with my Ultralight’s grip safety.

He asked if he could reach out to them and ask questions, hoping to see if they’d resolve the issue. I should’ve refused, but didn’t want to pass up the opportunity.

He reached out to them, providing my point of contact information so that they could reference the support case. When they replied back, I was more than a bit put-off.

Here’s what he forwarded to me:

I heard back and what was reported was that you must have removed the mainspring housing pin (maybe to remove the magazine well?) while the hammer was backand so the internals jettisoned, and it appears they were sort of forced back in place without proper alignment. Is that accurate?

I got hot, quick-fast. I’d communicated with them in the past regarding this issue and they didn’t reply back in such a fashion.

This is all but blaming the customer regarding a non-functional safety! Think about it for a second.

They implied that I didn’t reassemble the gun properly, which stopped the grip safety from working. That’s all but impossible to cause by disassembling and reassembling the firearm.

When I grip safety stops working properly, it’s almost certainly due to the part not being fit properly. To be clear, it’s usually due to the part being over-fit, by a gunsmith. I’m sure they may wear down over time, but I’ve only owned the gun maybe 3-4 years. It only has 2300 rounds through it.

There’s no way this could occur by a misalignment when reassembling a detail-stripped 1911.

I’ve 8-9 other 1911s and 2011s besides the Ultralight. I’ve detail stripped all of them, more than a few times, as well. None of them have that particular issue. Only the Ultralight has that issue.

If I were to believe them, that would mean that the tolerances on the internal parts of that gun are either very malleable, or it has some unwanted tolerances that would allow the grip safety to move. If that’s what they’re saying, that’s crazy to admit.

Detail-stripping and reassembling a 1911 isn’t rocket science or a black art. It’s super easy to both disassemble and reassemble. There’s no other order/method of reassembling a 1911. When reassembling, you can’t get it so wrong that a grip safety drops the hammer without the grip safety being touched. That is a fitment and/or metallurgy issue.

Basically, if too much material was removed from the grip safety’s internal arm (or lug), it might not reliably block the trigger bow even when the safety is fully released.

Additionally, a tight fit between the bottom of the grip safety and the top of the mainspring housing can cause the safety to bind or stick, preventing it from moving freely regardless of the gun’s round count.

There are other things that can cause the grip safety to malfunction, too – sear spring tension, trigger bow interference, debris, bad pre-travel adjustment, and changes of grip technique (that last item isn’t a mechanical part issue, though).

None of the issues are due to mis-assembling. And yes, I checked pre-travel (Bul Armory probably did, too).

I apologized to Graham the next day but I never took the time to explain to Graham exactly how I explained it up above.

I will never buy another gun from Bul Armory. Even before Graham tried to assist, I was unlikely to purchase another gun from Bul Armory, but they’re reply pretty much solidified my decision.

What’s funny is that I asked them to replace the grip safety twice when I sent the gun back to them for repair. They never replaced the grip safety. I’m almost certain they only bent the right leg of the sear spring to add tension, which is a temporary fix – that tension will eventually loosen, which is why the issue keeps recurring. They applied the lazy fix, twice, and then had the gall to tell me that I was reassembling the gun wrong (which wasn’t the case).

Research tells me that the grip safety needs to be replaced. I’ve also asked other 1911 owners and got the same feedback.

As I stated in the past, I eventually plan to either block the grip safety and only use the gun as a range gun, OR, hire a local gunsmith to install a new grip safety.

UPDATE (11/16/2026): I noticed that the polymer mainspring housing was beat up and looks to be being whittled away, especially around where the bottom of the grip safety is. Was wondering if that was making the grip safety issue more apparent, so I ordered a new polymer grip safety. It arrived today and I swapped out the internals of the old housing to the new housing and installed the new housing into the firearm…it did not help. At this point, I need to consider if I want to just pin the safety or send it to a gunsmith.

Categories
9mm Springfield Armory

Kuna + Faux 4-Piece Brake?

Awhile back, I bought a faux 4-piece muzzle device from PSA for use with my AK-V, which I’d discussed in this post.

I didn’t like the look, so it didn’t stay on the AK-V long – I restored the OEM flash hider.

The 4-piece brake isn’t really 4-piece It is one solid piece, meant to mimic the Bulgarian 4-piece flash hider.

It had been sitting on top of my safe up until tonight. I was wondering if it would fit on the Kuna, so I attempted a test fit.

First of all, whoever installed the OEM brake on the Kuna went Hulk-mode, because it took a huge effort to remove it!

The PSA brake fits, though. Not only does it fit, it looks better on the Kuna than it does on the AK-V. As well, it extends the muzzle outward a few inches, which means I don’t have to worry as much about getting my hand too close to the muzzle. The faux brake doesn’t have ports, so I don’t have to worry about plating hitting my hands.

Here’s how it looks:

I also noticed that the safety has started to loosen…it’s much more loose than when I first got the gun. I’d already been lubricating the rotating areas around the safety, under the receiver. I added a tad more oil so that it can continue to feel fluid.

So, it appears that I need to visit the range again, but I need more ammo. I will probably buy more from Cabelas to keep me busy through Thanksgiving.

Categories
AK-V carbine pistol caliber carbine PSA

My PSA AK-V Has Crossed the 1000-round Threshold!

I bought the Palmetto State Armory AK-V, an AK pistol chambered in 9mm, back in October 2019. I’ve been shooting it sporadically over the past seven years, but we’ve finally crossed over 1000 rounds.

This particular gun doesn’t have a folding brace (it has the SBA3 brace). It has black Magpul furniture. I originally planned to order the red wood furniture, but I now prefer the Magpul furniture, as it has heat shielding.

This is the day I received the gun.

The gun has never had any ammo-related issues. It feeds and extracts without issue. The only issue I ever had with it was related to a Manticore CZ Scorpion mag – I’ve two of those and one of them has feed issues (I’ve marked it but have since not been shooting from those two mags).

I’ve not ever shot JHP from this gun (I’ve no plans to use it for self defense). I’ve only ever shot FMJ from it.

This gun has always been a nice gun to shoot. Although the AK-V uses a blow-back operation, it maintains manageable recoil. The trigger is not an ALG trigger, but it is very nice for a standard OEM trigger. The trigger is nice enough that the gun can accidentally be bump-fired. In fact, I had several unintentional bump-fires the last few range visits.

The mounted optic is satisfactory, as well. I’m using the Vortex Sparc II red dot, which is an older optic with sub-par battery longevity, but it works.

The gun’s internals are OK, as well. I also have a spare extractor and firing pin (with replacement roll pins) that I’ve stored in the Magpul grip storage compartment.

This gun is a dream to shoot and I’ll probably keep shooting it, as I’ve a need to compare it with my Springfield Armory Kuna. Although one uses a roller-delay system and the other uses a blow-back operating system, both are 9mm PCCs—so I know they’re very different, but they’re also similar.

I’ve a BUNCH of AK-V mags, as well (probably 12-15).

Again, this is a very fun gun to shoot. I’m extremely glad I bought it. It is one of my favorite guns!