I wanted a place to discuss my handguns and firearms in general. Everyone seemingly has lots to say about guns, so I promise you this won't be a rant blog.
I had the choice to continue to carry my Alpha Foxtrot S15 after my SAS II Ultralight was returned to me from Bul Armory after they repaired it.
Although the S15 is thinner (which helps in concealment), I actually missed carrying my Ultralight, so I decided to switch back to carrying the Ultralight. I just need to take it to the range tomorrow and re-zero the RDS.
There’s something about the Ultralight that keeps attracting me to it. It’s only a few ounces lighter than the S15 but it feels much lighter than it is. Maybe it’s the trigger (it’s GOOD). I love the looks of the gun…the lightening cuts and barrel fluting, as well as the black color with the silver accents.
Right now, the RDS is mounted onto the Ultralight. I mounted the Streamlight (TLR-7 X) to the Ultralight, too. It fits in the QVOT holster without issue. I did have to tighten the holster’s retaining screw quite a bit, as the S15’s rail is wide. I also reinstalled grip tape to the gun.
I’ll look for some SD ammo tomorrow at Cabelas or Trojan Tactical. I may settle for Federal or Hornady. I need to buy several boxes of the good stuff, shoot one box to test the ammo, and then use the other box for carry.
I saw that Bul Armory is now offering the original grip module for purchase. That module has far better grip texturing. It’s $149 on their website. I may order it, but I may add it to my Christmas list so that my wife or kids can buy it for me – if I opt to add it to my Christmas list, I’ll have to wait until after Christmas before I can install it.
I need range ammo as well…I’m almost out and I’ve been buying 500 round blocks of Winchester White Box from Cabelas. When shipping is factored into online prices, the prices are roughly equivalent to what I can buy locally from Cabelas (and I don’t do reman ammo). There are no local LGSs that sell bulk 9mm, so it’s either Cabelas or buying online. I can’t stand the $20-30 shipping of ammo, though. I know ammo is heavy, but damn…
I’m late in reporting but my SAS II Ultralight is back from Bul Armory.
It was delivered yesterday, on a Sunday – was unexpected, as the shipping info stated it would be delivered on Monday, 9/30.
I tested the gun. It is no longer dropping the hammer without actuating the grip safety.
I’m not sure if I’m going to carry it again or wait, but I did check to see how well the gun fits the Streamlight TLR-7 X – it fits extremely well, without having to change keys (it’s still using the same key it came with out of the box).
I tried fitting the TLR-7 X on my AF1911-S15 – it fits but not fully back to the trigger guard. I’d probably need to change the key to get it further back and I’m not sure if that will adversely change the fitment with the Ultralight, so I’m going to leave the light alone and not change the key.
As well, the new holster was delivered today. As I reported earlier, I bought a 2011 holster from QVO Tactical. I tested fitment today. With the Ultralight and TLR-7 X, it fits perfectly. I did drop the holster down to it’s lowest hole settings (it’s using Double Tacware 5-hole clips) so that it sits low in my waistband.
I also test fitted the S15 to the QVO Tactical holster and TLR-7 X. The S15 is a bit taller at the muzzle than the Ultralight, so there is a bit of rubbing inside the holster. I’m able to account for most of it by loosening the retention (I’ve to do this with all the holsters I use with the S15 – it’s rail is extra beefy).
I also attached velcro to the holster so that I could use my pre-cut foam wedge from Mastermind Tactics. With the wedge, the holster being Commander-sized, and the fact that he has an aggressive wing, the S15 is very concealable. This is why I’m probably going to keep carrying the S15 for a while. No, it is not RDS capable (yet) but I shoot the gun just as well as a gun with an RDS.
Oh, and yeah, the empty space around the trigger guard is not an issue – ALL holsters that accommodate WML (weapon-mounted lights) have extra space around the trigger. That’s unavoidable.
I think I should’ve looked at custom holsters a long time ago. Tenicor is great, but being able to tune a holster to your specific needs is a powerful thing.
I posted here that the Ultralight had to be sent back to Bul Armory for repair (again).
It is September 27th and I just got an email that the UL is on it’s way back to me. They received it September 11th.
The notes they provided:
The pistol underwent a full inspection where we made sure all the different components are within spec.
We then adjusted the main spring and test fired the pistol and the pistol works well as it should.
I’m kinda wary, as the pistol itself was working well when I sent it to them…the issue was that the grip safety wasn’t working properly.
It should be back to me on October 1st.
If it’s not fixed (as I suspect), I’ll stop carrying it. I may sell it to finance a different 2011. I may research to see if I can fix it on my own. Or, I may find a gunsmith that can fix it.
I may be overly worried about this, but I don’t think that the issue was a mainspring adjustment issue, especially since since Bul Armory has had the chance to fix this (twice now). I do not have any other 1911 or 2011 that has ever had this issue and I don’t believe mainsprings just loose adjustability out of the blue to the point that the grip safety stops working.
The grip safety was not stopping the hammer from falling.
This occurred back in January 2024 and I sent it back to Bul Armory then.
When I received it back, I tested it and the grip safety was functional.
Eight months later, I checked again, and the hammer is dropping again, although I’ve to hulk up on the trigger to get it to drop.
I went to Reddit and asked why this would be occurring and I got several answers. The first two were basically the same answer – that whoever built the gun removed too much material on the grip safety when fitting the part.
The last answer wasn’t really an answer…it was more of an accusation that I wasn’t engaging the grip safety fully, which excessively wore the part over time. I told the guy that that wasn’t the issue, and thanked him for his time. I highly doubt that was the issue, as I’ve to tightly grip the gun to control it and when I grip, the grip safety is disengaged.
Another guy chimed in stating that he’d had the exact same issue. He said he’d bought his gun from GP Arms, who was a Bul Armory importer up until a month or so before I bought my Ultralight. Gabe said that he’d seen the issue before with BA guns, and he fixed it. The guy said the issue never recurred.
So, this leads me to believe that this is indeed a manufacturing issue.
Keep in mind that the one-year warranty expired back in March 2024.
My options were to:
Get the safety pinned – not an option on a $1500 gun.
Find a gunsmith that could fix the safety – not an option on a $1500 gun.
Reach out to Bul Armory and explain to them that they “fixed” this back in January, only for the issue to recur eight months later. Ask them to fix it under warranty and if they won’t, ask them to diagnose the issue and if the cost was reasonable, I’d pay to have it fixed.
Fix it on my own – last resort option (would find a gunsmith before I did this).
I ended up reaching out to Bul Armory and explaining that whatever fix they applied did not work, that the gun was out of warranty but wasn’t when the “fix” was applied. I asked them to fix it under warranty since their fix didn’t remedy the issue. I explained to them that reliability was important to me, as the gun was a carry gun. I also asked that they ensure the gun stayed fixed this go-around and asked them if they needed to replace parts, to please do so.
Bul Armory honored my request. I sent the gun to them last week – they’ve had it a week, so far.
I’m carrying the Alpha Foxtrot while the SAS II UL is being repaired.
I will post an update once the gun has been returned to me.
Today, I was looking at a holster that I bought that does not carry well. The specific holster is the Priority 1 PCHS for the Bul Armory SAS II UL. The PCHS holster is designed for a short-barrelled handgun for appendix carry (inside the waistband) and has a habit of pushing out the gun’s grip. I want the grip to be tucked in.
Now, this issue is lessened if you buy a holster that is longer than the gun. For example, I bought the Tenicor Certum for 4.25″ 1911s and I use it with my short-barrelled 1911s. Since the holster is longer, it helps to stabilize and better position the holster – it pertains to the keel method and also applies to wedges and other contraptions that help with positioning the holster and gun.
With the Certum holster, I use a custom wedge that I made from a yoga bar and velcro’d the wedge to the holster. The wedge gives me some extra positioning and pushes the gun’s grip into my body. It’s not perfect but works well enough.
With the PCHS holster, I didn’t use a custom wedge, but received a PHLster holster wedge kit for Christmas present from my sister. I’ve been trying to use those wedges with the PCHS holster but it’s not working well.
Since I’ve been having issues with wedges, I decided to just buy several wedges from Mastermind Tactics.
I ordered the packs because I’ve several holsters and I can benefit from having several types of wedges and pillows to customize the fit/ride of my holsters. Plus, I can get rid of the custom wedge if I find that one of the above solutions works.
I’ll post updates once I’ve begun to experiment with the delivered products.
I’ve been thinking on what my next handgun should be.
A listing:
Dan Wesson (CZ) DWX (full sized)
Cosaint COS21
Bul Armory Tac 5″ or Tac Pro 5″
Alpha Foxtrot Romulus 5″ or Spatha 5″
Stealth Arms Platypus
Springfield Armory 1911 DS (Prodigy) 5″
GP Arms Patriot 4.8″ or Forza 3.10″
My budget is between $1000 and $2000.
What I really want is something I don’t already have, configuration-wise. I do not have a 5″ 1911 that is chambered in 9mm. I’d prefer it to be double-stacked. I’d prefer it to not be over $2000. I do not want another cheap 2011, either – that includes any Tisas, MAC, LFA, or Witness…basically, nothing under $1000.
The Dan Wesson DWX is something that I’m curious about Dan Wesson makes great 1911s and this is apparently a blend of CZ and 1911. They’ve an MSRP of $1999 and can be found as low as $1700, so they’re within the budget. DWXs are a bit different and I love the unique guns. The con of this gun is that they are not optics-ready, which is a bit crazy considering that it costs that much and modern guns are usually cut for an optic.
I was thinking Cosaint COS21 (it’s their 5″ duty gun) but that’s rather expensive, starting at $2600! The smaller variants are $100 and $200 less (starting at $2500 for the Commander and $2400 for the Officer variants). If I’m going to spend that much money, it’ll be on a Stacatto, so scratch Cosaint off the list, simply because they assault my sensibilities. They’re probably great guns but I’ve a budget to consider.
I was also considering the new 5″ Bul Armory TAC or Tac Pro, in 5″ length. The Tac Pro is only a bit lessexpensive than the the Cosaint COS21. The Tac is $2250. Both are out of budget, sadly. As well, Bul Armory only have 1-year limited warranties on their guns, so no more Bul Armory guns for me.
I may do another Alpha Foxtrot – they’ve two new double-stacked 1911s that are in the pipeline: the Spatha and the Romulus. The Spatha appears to be a double-stacked 1911 that is solid-framed, and the Romulus appears to be a legit 2011. The con for Alpha Foxtrot is that, like Bul Armory, they only have limited 1-year warranties, but I love their guns, so I may be willing to overlook the warranty. Of the two (pictured below), the Romulus has more of my interest. Prices aren’t listed yet but I’m thinking they’ll be in the mid $1000s.
There’s the Stealth Arms Platypus. The Platypus’ pro is that it’s highly configurable. It’s cons are that it’s not really a 2011 and that most folks have them.
The Springfield Armory Prodigy is something I’ve always desired, and it has a full warranty, will take standard 2011 mags, has a very robust optics mounting system, has a great grip module, and is very flat-shooting. Yes, they initially had problems. I haven’t heard of any recent complaints, though.
The GP Arms Patriot is not new (they also have the 3.1″ Forza, which is very like the Bul Armory SAS II UL and is priced at $1590) but is very configurable. They are a tad bit pricey, though…they start at $1950.
Outside of 1911s/2011s, I’ve been curious about the Glock 43X and Glock 48. Hell, I can get both of them, in MOS configuration.
Of them all, the 5″ Prodigy is the stand-out option. I can even get the variant that has 3 mags and the HEX optic,which will certainly already have the optic mounting plate, and it will still be reasonably priced (at around $1400). Plus, I already have two Checkmate mags and a 17 round Duramag.
I’ll also keep watch on what else is released this year, as I’ve until next spring to decide.
I received an email from Bul Armory yesterday evening. They stated that the gun has been repaired!
While it was there, they also did a performance tune-up of the gun.
An explanation of the cause of the issue was not provided, but they did give me a listing of the things they did.
The pistol underwent a full inspection where we made sure all the different components are within spec.
has been polished chamber also the ramp was moved forward and polished as a extra adjusted mags specs checked extractor tension fitting slide/barrel/ejector grip has been adjusted/thumb safety
All the safety components work properly and the pistol was then test fired and works well as it should.
I’m happy the grip safety issue was fixed, but I didn’t want anything other than that to be fixed. With their tinkering, they may have introduced faults with the gun.
We’ll see how it is when it’s returned. I will have to take it to be shot Monday or Tuesday evening.
I sent it to them on 12/22. I planned to give them approximately 30 days to fix the issue before contacting them. They finished it a few days before I would’ve called them. That worked out better than I’d planned.
They also stated that they’d “adjusted mag specs”. I sent them one mag (of the four that I had) because I didn’t want to send them all and not get them all back.
I’ll probably also record a 10 min video on Monday, as well.
I’ve started my Christmas 2023 vacation this week. Several things are on my agenda as far as firearms are concerned.
I’ve to send my SAS II UL back to Bul Armory for them to fix an issue that I couldn’t resolve. The problem is that I can fire the gun without disengaging the grip safety. I did replace the trigger shoe with a flat shoe. That replacement required me to remove the over-travel screw, but I adjusted it properly. At least, I think I did. I’ve done the same to my other 1911s and none of the other guns are experiencing the issue. I don’t typically test to see if my 1911s will fire with the grip safety disengaged, so I don’t know why I tried it this time. BA sent me a shipping label so that I can send it back to them. I’ve boxed up the gun and will ship it out tomorrow. I’ve removed the optic and reinstalled the rear irons. I also included an empty mag (they asked for it to be sent with the gun). I’ve no idea how long they’ll have the gun and customer support is hit/miss as far as being good is concerned.
I haven’t shot my Tisas Duty in a while. Someone asked in r/1911 about extended reviews of the gun. I stated that no one has been posting about the gun, other than after one range visit of shooting. So, tomorrow, I plan to visit the range with the Tisas. I went to Cabelas and found some somewhat cheap ammo. I bought three boxes of 50 rounds each. The whole reason I stopped shooting it was because 45ACP was expensive at the time. I’ll bring an extra box from home (I’ve a box of Herters JHP too). I’ve some Underwood +P too, but that’s expensive, and after a while, it actually hurts to shoot it. The jarring is pretty ruthless, at 1200 FPS. The plan is to try to shoot all 200 rounds. I’ve to remember to bring all the different mags I have.
While the SAS II UL is out for repair, I’m carrying the Alpha Foxtrot S15. I’d checked to see if the S15 would fit in my Tenicor holster (when I’d first bough the gun), but I’d never actually worn the holster with that gun. It EASILY carries. While I knew the grip was thin, it’s easy to hide – much easier than the SAS II UL’s grip. What I’m not used to is it’s heft. It’s heavier – not by a lot, but it’s noticeable.
As soon as the SAS II UL gets returned to me, I probably should ask Alpha Foxtrot to look at that gun, as the ramp frame insert sometimes moves. Once that has been fixed, I’m probably going to find a reputable place that’ll make the gun optics-ready.
I’ll update you all on the status of the Bul Armory once it is returned to me.
He tells me, “don’t tell me it’s not the gun,” and to “stop that nonsense,” whatever that means.
I’d basically said that most folks having feed issues with the gun haven’t checked (nor care to check) to see if it’s them (the shooter) and not the gun itself. The very first thing folks should always do is to ensure that they’re not causing the issues that their guns are exhibiting.
Suggesting that folks may be limp-wristing their guns almost always offends them, which is kinda wild. Folks act as if they are infallible? Why? The typical reasons folks get offended is because they think that they’re masters of shooting after shooting X amount of years.
This particular commenter said that he doesn’t have issues shooting his micro-compacts. He mentioned that he has a P365 Macro, Hellcat and Shield Plus and none of them have feed issues. I told him that you can shoot one gun (or even several small guns) well and still have an issue with recoil management with another small gun, because they all have different grip textures and grip lengths, and each person’s hands on this Earth are going to differ. It’s not a problem with the gun – it’s a problem with the person wielding the gun. I also said that some guns are more sensitive to limp-wristing than others, too. Some guns will flat-out not tolerate limp-wristing.
This guy also didn’t say how many rounds he’d shot through his SAS II UL, nor how many mags he had. He didn’t say what ammo he was shooting through it, either. There are MANY variables that can contribute to feeding issues, but limp-wristing is the big one.
Factoring out limp-wristing, the next thing to troubleshoot would be the magazines. I’ve four magazines. I’ve NO feed issues whatsoever. I’ve shot a shitload of different types of ammo through the gun, but I’ve not had any misfeed trends.
The commenter could actually be experiencing an issue with both mags (I’m assuming he has two since he stated he’d just bought the gun two weeks prior), but, as I already stated, he didn’t supply any other data – he mostly gave me salt. I also asked him to supply a video so that everyone could see it. That was ignored. He also left a second separate comment saying that Bul Armory is paying me to say what I did, which is stupid. I used straight-up logic to explain it all (and I explained the logic below)…it’s not something that Bul Armory needs to tell anyone. He sent the gun to Bul Armory and they sent him a video showing that they shot a mag of ammo from the gun without misfeeds. If someone shoots the gun that you’re complaining won’t feed properly and they can’t generate those same misfeeds, logic dictates that you may be the issue.
There have been numerous Reddit posts showing videos of Bul Armory gunsmiths shooting guns that were returned to them and the guns not having issues. I’ve seen some videos where guns go through a full magazine without feed issues. I’ve seen videos where guns go through two mags without feed issues. The gunsmiths use the customer’s mags when shooting, as well. The gunsmiths send the guns back to the owners and the owners shoot the guns, generating feed issues. In all cases, the gunsmiths send the ammo they were using back to the customer, so when the customer tests, they’re using the same ammo as the gunsmiths were. This tells me that there could be an issue with limp-wristing, especially if the gunsmith can’t replicate the misfeeds.
The gun is small – it is closer to 3″ than 3.25″. It is light. It’s a known fact that Officer-sized 1911s tend to have more issues than larger-sized 1911s. The gun could be faulty, yes, BUT I believe shooters should always try to ensure that they are not generating the issues.
I explained in my video that I’d run into a similar problem with a particular 1911 and was about to sell the gun. I kept thinking that the issue could be me – there was like a very small percentage of doubt that I was causing the issue, so I started forcing myself to troubleshoot both the gun and myself. I shot a lot of ammo through the gun, even when it was failing to feed. The gun didn’t have a ton of ammo shot through it, so I didn’t think it needed another recoil spring, but I ordered a new one anyways. I bought new grip panels, too. The misfeeds lessened but didn’t stop. I then decided to wear a helmet camera and record one hour of range shooting. When I got home and checked the footage, I was shocked and humbled. I was very loosely controlling the gun and it was plainly viewable. The next time I visited, I focused on my grip discipline and I didn’t have a single misfeed.
In my opinion, if you’re not checking yourself, you’re setting yourself up for problems. I don’t have an issue letting folks know that when they have feeding issues, the shooter could be the issue.
