Category: 9mm

Categories
1911 2011 9mm AF1911-S15 Alpha Foxtrot Bul Armory SAS II Ultralight

My AF1911-S15 – First Range Visit

This gun can shoot!

I took it to the range today and shot 150 rounds from it (Blazer flat-nosed 147-gr FMJ and Herter’s Target 115-gr FMJ). There were no feed/eject or firing issues.

I shot it at 7 yards then moved to 10 yards. I initially had issues – was hitting low and left of point of aim. Even when I stopped pulling left, I was still hitting an inch low. As I kept shooting, I learned how to better control the gun, and so my groups got tighter as I shot. I began to hit bullseyes.

Even at 10 yards with irons (and I wasn’t wearing my prescription glasses), I was hitting bullseyes.

It’s easy to shoot this gun well – much easier than the Bul Armory, IMO. The differences are that the S15 has great front strap and back strap checkering, which helps greatly with gripping the gun. As well, the S15’s slide is heavier, which helps with recoil management, as the slide soaks up some recoil.

The SAS II UL became a different beast altogether once I added the optic to the handgun. I’m shooting the S15 just as well, without an optic, which is amazing. Yeah, the SAS II still shoots quicker at distance, but that’s solely due to the optic. Once I get the S15’s slide cut for an optic, it’ll be just as good as the SAS II at shooting quicker at distance.

And yeah, I shot 150 rounds through one magazine. it was a pain in the ass, but I had no choice. I had no issues with the magazine (it is a gen 2 Shield Arms mag).

GT Distributors did send me an RMA shipping label and I’ll be sending them back the wrong mags they sent me…once I send them back, I’ll reach out to them and ask them when to expect them to correct their mistake…I still need (and paid for) S15 mags.

I’ll update this post with range footage sometime this weekend.

Categories
1911 2011 9mm AF1911-S15 Alpha Foxtrot

I’ve An Alpha Foxtrot AF1911 S15 On the Way!

I kept eyeing the AF1911-S15 even after purchasing the Bul Armory SAS II UL, so I took a hard look at it and decided to purchase it.

I bought Gen 2 version of the handgun, which also has a threaded barrel. I bought it from Battlehawk Armory. Since it only comes with one 15-round mag, I ordered three more (generation 3 mags from GT Distributors – I’d have ordered straight from ShieldArms.com, but they our currently out of stock).

Now, I could’ve waited until mid June for their optics-ready version but I’ll be out of the country that timeframe and these were currently in stock (they aren’t always stocked).

I’m excited, as this particular gun is very nice.

If I find that I want/need an optics cut, I can find a business that can perform that modification.

Categories
1911 9mm RIA Rock Island Armory

Range Visit Summary For 11/15/2022

I visited the range for the first time since April 2022. I’m still focusing on 1911s, and I’m preparing to carry my RIA Rock Ultra MS in 9mm.

Why carry the 9mm instead one of my 45ACPs? The two 45ACP 1911s I have are the Metro Arms American Classic Commander and the Tisas Duty (full-sized). I’ve found that even though the heavy metal frame soaks up a good bit of the recoil of those 1911s, 9mm shoots even better from the 1911 frame. As well, 9mm is cheaper and easier to find, locally or otherwise.

Another thought: If I end up ever having to defend myself, I’d have to temporarily give up my gun for case evidence. I do not want to give up any gun but of my 1911s, the ugliest is that 9mm Rock Ultra! While it’s the ugliest, I shoot it the best, by far!

I didn’t want to bother with capturing video footage during this range visit, so I have none, but I did keep the targets and I’ll post them down below.

The below pictures are in chronological order of when I shot at them. Each second picture is a picture of quick range notes (written on the back side of each target).

I shot between 7 and 10 yards – anything further and I struggle to see where I need to hit (all but one target are designed to be shot from 7-10 yards. My actual range notes will be at the bottom of this page.

I’ve two holsters that’ll fit the Rock Ultra without issue, but I’m wondering if I should try carrying appendix – I’m eyeing a holster but need to know if I can commit to it before spending $100-120 on a AIWB holster.

I also just bought two extra 10-round mags so that I can use my two WC mags for carry duty.

Photos of the targets:

I numbered in which order I shot at each mini-target.
I numbered (and circled the number) in which order I shot at each mini-target. I also counted each hit per mini-target.
I aimed between the dead space between the right-side mini-target, attempting a group of five.

Range Notes:

**********************

I brought 350 rounds with me, but only shot 228 (one box of 50 was half empty).

I brought the following brands:
Norma 115-gr FMJ (100)
Federal Hi-shok 115-gr JHP (50)
Belom 115-gr FMJ (50)
Fiocchi 115-gr FMJ (28)

Of the total, there were 8 FTFs and one FTE (stovepipe). It was with one brand of ammo – the Federal Hi-shok JHP. The FTFs were almost certainly due to the hollow points – I expected as much. The FTFs only occurred at the top of each mag (top 3 rounds). After the 2nd-3rd round, the issue stopped. It stopped after 3 mags, as well. Note that the mags were Wilson Combat mags and two ACT mags. It happened with both mag brands, so this wasn’t a mag issue.

This gun is accurate as all hell! I ate the middle out of a target at 10 yards (shot 50 rounds). It’s flat-shooting. Yeah, the initial grouping had opened up but I found I had to just be steady (and watch my breathing as well) to get tight groups.

I will probably begin to carry this gun, which is why I put so much ammo through it this range session. I just need to refer to my notes on which JHP this gun didn’t have issues with – I think I shot some 9mm SD ammo through it last range visit.

Rock Ultra MS in 9mm
Categories
.45 ACP 9mm

Handgun Parts Received

Last week I ordered a +4 aluminum basepad for a Canik TP9 Elite SC magazine that had a flat baseplate. I bought the +4 basepad from Taylor Freelance.

It took three days for delivery. I ended up installing it wrong and had a very difficult time removing it (if you buy this part, remember to remove the plastic at the bottom of the mag spring, otherwise you’ll have a very difficult time removing the +4 basepad).

The magazine was a 10-round mag that I converted to 12-round. With the +4 basepad, the gun now holds 16+1. I carried with it yesterday. Other than initial coldness of the metal against my skin, it wore well.

I also bought an 18-lb progressive recoil spring for my .45ACP Commander 1911, from BH Spring Solutions. I compared the old spring with the new and the old one is compressed a bit and also feels a bit lighter than 18-lb). Inside the 1911, the new spring offers noticeable resistance. I can’t wait to take the 1911 to the range. Sadly, I can’t right now, as I’ve some medical issues that currently block me from leaving the house (not Covid).

I’ll capture range footage of the 1911 once I’m healthy!

Categories
1911 1911A1 45ACP 9mm American Classic Commander Metro Arms RIA Rock Island Armory

New YouTube Video – 1911 Range Day!

I tried a new format in this video, using my GoPro hat-clip. What I didnt’ account for was the volume isn’t crisp, as the hat-clip requires usage of the GoPro case, which is apparently covering the camera’s mic. 🙁

There were issues with the Metro Arms 1911. I’ve been suspecting as much the past 1-2 years, but my handgun experience is expanding and I’m confident to say that this handgun has issues with it’s sights. I’ll be looking into obtaining a new set of sights for this handgun (I wouldn’t mind having the sights that are on my RIA Tac Ultra installed on this handgun).

Also, I finally installed the 9mm barrel into my RIA Tac Ultra (I have always shot it with the 22TCM barrel installed). I shot 140 rounds of 9mm from the gun. The gun now has a total of 746 rounds through it. It’s my third most-fired handgun (the Grand Power P11 and Bersa Thunder Plus are 1st and 2nd).

There were some fails to feed when firing the Tac Ultra, but the feed issues only occurred with the OEM mags. I’ve Wilson Combat 9mm ETM mags, which didn’t have any feed issues. I also used the 38 Super mag that came with the Tac Ultra. I also used the 9mm mag that came with my RIA Rock Ultra. The latter two mag are the mags that had inconsistent issues. The feed issues were occurring mid-mag.

Lastly, I need to research who is the new US importer for Metro Arms. Eagle Imports was the importer, but they went out of business earlier this year.

Categories
100-gr 2.0 9mm Alien Gear Canik Cloak Tuck frangible Hevi Shot holster N8 Tactical subcompact TP9 Elite

More Testing – holsters for the TP9 Elite Subcompact

So, I received the holster shell for the Canik TP9 Elite SC on Saturday.  

I installed it on my Alien Gear Cloak Tuck 2.0 holster base, although I hat to mess around with the mounting screws and bushings to customize the fit.  As well, I used blue thread locker on the screws.  I’ve been carrying the handgun in this holster half the day.  It carries well with this holster.  It doesn’t protect from the grip texture, though, but I installed rubber Talon Grip tape on the grips on Saturday, as well, so the texture doesn’t beat up my skin.

I’ve yet to give the N8 Tactical holster a try.  Maybe soon.

Also, I want to give the holster that came with the handgun another try, soon, too.

I found that I’ve another box of Hevi Shot 100-gr frangible 9mm ammo.  I shot most of a box (of 50) from the TP9 SC.  I think I may attempt to use this ammo as SD/HD ammo.  It shoots flat and doesn’t jam the handgun.

UPDATE:

I’ve been giving the Alien Gear holster a try, carrying it around the house.  It carries well but the included Canik holster works surprisingly well.  I still do not know which I’ll use.  I suppose I can use all three over a long time span and report on my findings.  So, with that being said, I’ll be carrying with the Alien Gear first!

Alien Gear Cloak Tuck 2.0 with TP9 Elite SC shell
TP9 Elite SC in the included holster provided by Canik
TP9 Elite SC in the N8 Tactical OT2 holster
Alien Gear Cloak Tuck 2.0 with TP9 Elite, IWB

Categories
10mm 1911 22TCM 9mm R1 Remington RIA Rock Island Armory sight adjustment

1911 Range Summary for 3/20/2021

Video Highlights:

1.  We bought Remington R1 mags (45ACP doublestacked) for use with my RIA 10mm HC, since I can’t find any Armscor mags.  One mag feeds well, the other does not.  Also, the R1 mags will fit the OEM 10mm base plates.

2.  We had feed issues with the RIA 22TCM extracting spent cases (the cases were getting stuck in the chamber).  This was an ammo issue – I had half a box of older ammo that I’d put aside because I was blowing primers and one case refused to come out of the chamber.  I’d forgotten that this was a box I wasn’t supposed to finish shooting.  In fact, there was one primer that was blown out in this range visit (I forgot to mention that in the video).

3.  I’ve been frustrated with all of my 1911s, thinking that I can’t shoot them because I’m never able to have tight groupings or that I’m always hitting low left (meaning I’m flinching or have bad trigger discipline).  Well, I prove that’s not the case on this range visit, as I also took my 9mm RIA Rock Ultra.  My groups were tight and directly under the bullseye.  I was shooting this gun the same way as the other two.  This proves I need to make sight adjustments.  In this case, I need to move the POI up 2 inches.  In the case of the 10mm, I need to adjust the sights up and to the right a few inches.  Not sure yet on how I need to adjust the sights on the 22TCM (maybe 2″ to the right).

Categories
9mm handgun pistol RFID Sentry SmartGunz

Review of the SmartGunz RFID-Enabled 9mm Sentry Pistol

[SHOT 2021] SmartGunz Announce RFID-Enabled 9mm Sentry Pistol

The highlights of this article is that this is supposedly a “smart” gun.  It uses RFID mounted within an included glove to recognize the proper owner of the firearm.  Without such recognition, the handgun can’t be used.

The firearm appears to be a modified 1911.

The firearm also requires the user to wear a fingerless glove (that’s part of the RFID process – a chip is apparently inside the glove).

In addition to the firearm requiring the use of the glove, it also requires the user to depress a switch on the firearm for it to fire.

The firearm is projected to cost $2,495 — YIKE$$$.

So, I guess you’ll either have to sleep with the glove on to use this pistol in a defensive manner as a home defense gun, otherwise, you’d have to hurriedly don the glove when you need to use the firearm.

If you’re to use it to carry (concealed or otherwise), it would require you to wear that glove throughout your day, otherwise the firearm would be useless.

As well, having to depress a switch to shoot a handgun (when you already have the RFID as an enabler)…WTF??

There’s a lot wrong with this handgun.  What’s it supposed to prevent that can be prevented with any current non-smart handgun while also using common sense?  Keep them away from kids and lock them up when not in use (to prevent theft).

I wonder what goes through a LEO’s mind when reading of this handgun.  It’s supposed to appeal to the police organizations.

Apparently this handgun supposedly “Protects you and your loved ones from firearm abuse, accidental firings, and suicide attempts”.

Let’s break that statement down by applying some rational questions to it.

How does this gun protect you and your loved one from firearms abuse any better than a traditional firearm?  While it may lessen negligent (not accidental)  firings, it may also get you killed because it’s useless without the glove and thieves and burglars won’t wait for you to put on the RFID glove so that you can defend yourself.

How does this firearm prevent or lessen suicide attempts???  WTAF…someone wanting to commit suicide with this gun just needs to put on the glove and actuate the button that enables firing – it will do absolutely nothing to prevent the owner from intentionally using it.  Owners of traditional handguns keep them locked up to prevent others from handling the gun (or, they’re liable after the fact of misuse).

The showstopper is the $2500+ price tag, though.  That’s top tier 1911 money.  Does it shoot like a $2500 1911?  Almost certainly not.  What happens when the glove wears out?  What happens when some of that circuitry glitches?  Is the circuitry going to get gummed up with lubricant over time?  I’m sure I can come up with more questions as I sit and think of use cases for this particular firearm.

Bottom line is, if you’re intimidated by firearms and have a Liberal mindset, this gun is for you!  I’ll pass.

Categories
9mm AK-V AKM Manticore Arms PSA range report

Range Summary #2 with the PSA AK-V!

I will let the last video do all the talking.  Needless to say, I’m really enjoying this firearm…it’s by far my favorite!  Enjoy.

Some range footage:

Categories
9mm Beretta compact decocker Grand Power holster N82 Tactical P11 PX4 Storm

The Beretta PX4 Storm 9mm Compact Has Arrived!

It arrived yesterday!

I’ve a tabletop video here (below):

I took it and the Grand Power P11 to the range this evening.  All I can say is, wow…

Pluses for the gun:

  1. It shoots almost as well as the P11.
  2. DA trigger is better.
  3. Shot 105 round of Magtech 115-gr FMJ and Browing BPT 147-grain ammo with only one round having an issue (light strike).  It loves 147-grain.
  4. It’s sights are easier to work with than the P11’s.

Minuses for the gun:

  1. Backstraps are extremely difficult to work with…well, not the backstraps themselves but the backstrap retention mechanism.  I struggled with it when swapping backstraps.
  2. Large backstrap is slightly warped (out of the box).
  3. The red paint that’s on the extractor (acting like a loaded chamber indicator) looks to have come off.
  4. Plastic guide rod.

How does the PX4 compare to the P11?

  1. The gun is only slightly larger than the P11.
  2. The P11’s mag holds 12 rounds.  The PX4’s mag holds 15.  This isn’t a huge deal, though…the P11 is sold as a sub-compact.
  3. The takedown of the PX4 is easy.  The takedown of the P11, while not exactly orthodox, is easy enough once you’ve done it a few times.
  4. The P11 is extremely finnicky about ammo.  The PX4 doesn’t appear to be as finnicky.
  5. The P11 needs to be run wet.  I’m assuming the PX4 needs to be run wet as well…they both have rotating barrels.
  6. The P11 won’t tolerate being dirty (lots of carbon will accumulate where the barrel rotates on the frame).  I believe it is more of a competition gun that just so happens to carry well.  The PX4 doesn’t appear to be as fussy when it comes to being dirty.
  7. The PX4’s controls are not conducive to carry duty, in my opinion…both the safety/decocker levers and the slide catch levers are too big and stick out well beyond the sides of the handgun.  Luckily, there are OEM “stealth” levers that make the gun feel a tad bit slimmer (and less “snaggy”).
  8. While the PX4’s sights are better than the P11’s the P11’s sights are purposely small.  This means that while they’re more difficult to use, they’re more accurate when used properly.  Still, I wouldn’t mind getting some night sights on the PX4.

Once I get “stealth” levers for the gun, I’ll begin to start carrying it around the house.  I plan to get the N82 Tactical Professional holster to use with the PX4.

The particular gun is the F-type.  I plan to convert it to the G-type.  I will never use the safety and I’m used to decock-only guns (my P11 didn’t come with a decocker and I manually decock it…it comes with a safety but I never use it because it’s always in DA mode).

So, 105 rounds were shot through the gun tonight.  Here’s the targets (shot from 7 yards with two types of ammo in two different weights and with two different noses).

These are the first 15 shots out of the gun.  The one in the red is the first shot (DA).  This is tighter than what I’m used to shooting from a new gun.  The shots are more vertically-aligned than that I’ve shot with my other new guns.
I started from left top to right top, left bottom to right bottom, then focused on the center target.  The first two targets’ DA shots were very close to the red.  The lower left, not so much.  The lower right group was extremely tight (there are 3 holes).  the center shot was a bit wide.
All of these shots were DA mode.  I’d shoot, then decock back to DA mode, then shoot, then decock, and so on.  This is 15 rounds.  All but 3 are in the red.  Two of those are close.  One is a flyer.
The first grouping of 15 is at the red.  The second grouping is at the head.  At first, I was slowly shooting the red.  At the head, I tried some double-taps (slow double-taps).  Again, I’m vertically aligned but spread out…IMO, not bad for double-taps.  Also, note that the second group would all be in the blue if I were aiming for the body.
Similar to the target above this one, I shot two different magazines, one at the body and one at the head.  I also did double-taps.  The first shots of the magazines were DA shots and each landed center mass.  The first grouping is vertically aligned.  The second group is spread out…not sure if this was due to the ammo (was using the 147-grain BPT target ammo).
This is the P11’s target.  These were rushed (45 rounds, combination of the BPT ammo and the Magtech).  I thought I’d be able to eat out the red from the target…nope.  But that’s probably 35 shots that are very much center mass.  I was shooting relatively fast and some are double-taps.  This gun rewards the wielder when basic fundamentals are applied but punishes the wielder if those fundamentals aren’t applied.  I’ve mixed results here…while the group is tight, I wanted them tighter.  Because I rushed, the gun punished me.  Remember what I said earlier about those small sights?  It applies to my aiming and shooting at this target.

All in all, this was a fun outing.  I plan to take the gun out again tomorrow and maybe spend more than an hour with both of them this time.  I may even take the Sig Pro to muddy up the comparison (since it is also a DA/SA polymer gun that I think I may carry).

Stay tuned!

UPDATE:  I got impatient in waiting for Beretta to stock up.  I did some research and found that there’s a store in Italy that sells both the stealth slide catch and stealth safety.  The site is here.  The part is here.  I know I have the right part because I compared the part numbers between it and Beretta’s USA site…they are the same (part no. E00348).  It costs 54,92 EU and 18 EU for shipping, for a total of 72,92 EU.  It’s a few dollars less than if I ordered from Beretta USA, but as far as I know, this site has them in stock.